/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.0-12-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: INTEL SSDPEKKF256G7H Serial Number: -- Firmware Version: HP01 PCI Vendor/Subsystem ID: 0x8086 IEEE OUI Identifier: 0x5cd2e4 Controller ID: 1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Fri Nov 20 12:07:46 2020 WET Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 65 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 5 5 1 + 4.60W - - 1 1 1 1 30 30 2 + 3.80W - - 2 2 2 2 30 30 3 - 0.0700W - - 3 3 3 3 10000 300 4 - 0.0050W - - 4 4 4 4 2000 10000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 27 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 11,050,923 [5.65 TB] Data Units Written: 10,930,936 [5.59 TB] Host Read Commands: 182,890,808 Host Write Commands: 156,443,595 Controller Busy Time: 1,929 Power Cycles: 983 Power On Hours: 2,919 Unsafe Shutdowns: 36 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 166 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, max 256 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 56 2 0 0x0000 0x0000 0x000 0 0 - 57 83886080 0 0x0000 0x0000 0x000 1 0 - 58 3480814476486246400 13105 0x3938 0x0000 0x000 4611408877072613376 16383 - 81 43083680244633491 4193 0x0099 0x1062 0x099 43083727489273954 10031213 0x6f 82 118717191050847 28174 0x0000 0x76b6 0x000 133066676795633 32393 0xd1 83 82901458766694 19413 0x0000 0x4bd5 0x000 83378200136661 19526 0x47 117 2329583964660170822 20047 0x0000 0x5845 0x5845 17294948770836848724 542398533 0x4f 118 17294948770836848724 22597 0x2054 0x4e4f 0x000 5066303652445378629 4026794054 0x45 119 5066303652445378629 70 0xf004 0x5845 0x2054 6360587102106701391 1179590740 0x46 120 6360587102106701391 8276 0x464f 0x0046 0xf004 86101751781445 1480939589 0x54 121 86101751781445 22597 0x5845 0x2054 0x464f 2329583964660170822 20047 0x45 122 7304666401497940038 8302 0x6e6f 0x0020 0x5845 6360490050044502100 1377846083 0x64 123 6360490050044502100 17219 0x5220 0x7964 0x000 5066303652445372420 4026794054 0x4e 191 5138409616254849605 16972 0x5241 0x4e41 0x4547 2325355309045990726 0 - /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.0-12-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD5000AZLX-60K2TA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Nov 20 12:07:46 2020 WET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5760) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 62) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 172 171 021 - 2375 4 Start_Stop_Count -O--CK 097 097 000 - 3040 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1617 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 977 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 066 062 040 - 34 (Min/Max 25/34) 192 Power-Off_Retract_Count -O--CK 200 200 000 - 46 193 Load_Cycle_Count -O--CK 198 198 000 - 7126 194 Temperature_Celsius -O---K 109 105 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0d GPL,SL R/O 8 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 203 Device vendor specific log 0xb6 SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 315 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 315 [2] occurred at disk power-on lifetime: 1615 hours (67 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:03.764 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:03.763 SECURITY FREEZE LOCK ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:03.566 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:02.777 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:01.899 READ DMA EXT Error 314 [1] occurred at disk power-on lifetime: 1611 hours (67 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:18.291 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:18.291 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:13.796 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:12.903 READ DMA EXT 25 00 00 00 02 00 00 00 64 08 0a e0 00 00:00:12.903 READ DMA EXT Error 313 [0] occurred at disk power-on lifetime: 1611 hours (67 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:02.936 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:02.936 SECURITY FREEZE LOCK ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:02.738 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:02.528 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:01.659 READ DMA EXT Error 312 [23] occurred at disk power-on lifetime: 1606 hours (66 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:07.613 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:07.613 SECURITY FREEZE LOCK ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:07.415 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:02.528 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:01.659 READ DMA EXT Error 311 [22] occurred at disk power-on lifetime: 1601 hours (66 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:03.491 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:03.490 SECURITY FREEZE LOCK ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:03.292 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:02.511 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:01.641 READ DMA EXT Error 310 [21] occurred at disk power-on lifetime: 1601 hours (66 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:07.030 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:07.030 SECURITY FREEZE LOCK ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:06.832 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:02.529 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:01.659 READ DMA EXT Error 309 [20] occurred at disk power-on lifetime: 1597 hours (66 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:03.519 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:03.518 SECURITY FREEZE LOCK ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:03.318 IDENTIFY DEVICE 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:02.537 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:01.658 READ DMA EXT Error 308 [19] occurred at disk power-on lifetime: 1592 hours (66 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 46 72 4c 6b e0 00 00:00:39.603 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:39.603 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:35.111 READ DMA EXT 25 00 00 00 08 00 00 00 04 09 20 e0 00 00:00:34.216 READ DMA EXT 25 00 00 00 02 00 00 00 64 08 0a e0 00 00:00:34.216 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 25/34 Celsius Lifetime Min/Max Temperature: 20/38 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (53) Index Estimated Time Temperature Celsius 54 2020-11-20 10:00 32 ************* ... ..( 2 skipped). .. ************* 57 2020-11-20 10:03 32 ************* 58 2020-11-20 10:04 33 ************** ... ..( 25 skipped). .. ************** 84 2020-11-20 10:30 33 ************** 85 2020-11-20 10:31 34 *************** ... ..( 95 skipped). .. *************** 53 2020-11-20 12:07 34 *************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 977 --- Lifetime Power-On Resets 0x01 0x010 4 1617 --- Power-on Hours 0x01 0x018 6 781096952 --- Logical Sectors Written 0x01 0x020 6 4939854 --- Number of Write Commands 0x01 0x028 6 414119985 --- Logical Sectors Read 0x01 0x030 6 4951543 --- Number of Read Commands 0x01 0x038 6 1526232704 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 1610 --- Spindle Motor Power-on Hours 0x03 0x010 4 705 --- Head Flying Hours 0x03 0x018 4 7173 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 46 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 33 --- Average Short Term Temperature 0x05 0x018 1 30 --- Average Long Term Temperature 0x05 0x020 1 38 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 34 --- Highest Average Short Term Temperature 0x05 0x038 1 26 --- Lowest Average Short Term Temperature 0x05 0x040 1 30 --- Highest Average Long Term Temperature 0x05 0x048 1 28 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1304 --- Number of Hardware Resets 0x06 0x010 4 262 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 9703 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.0-12-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 Device Model: TOSHIBA HDWD120 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX4OACF0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Fri Nov 20 12:07:46 2020 WET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron] Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14344) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 239) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 141 141 054 - 66 3 Spin_Up_Time POS--- 121 121 024 - 313 (Average 314) 4 Start_Stop_Count -O--C- 100 100 000 - 179 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 692 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 176 192 Power-Off_Retract_Count -O--CK 100 100 000 - 186 193 Load_Cycle_Count -O--C- 100 100 000 - 186 194 Temperature_Celsius -O---- 142 142 000 - 42 (Min/Max 19/50) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron] Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x06 SL R/O 1 SMART self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f SL R/W 16 Host vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 395 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 26/43 Celsius Lifetime Min/Max Temperature: 19/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (68) Index Estimated Time Temperature Celsius 69 2020-11-20 10:00 38 ******************* 70 2020-11-20 10:01 38 ******************* 71 2020-11-20 10:02 38 ******************* 72 2020-11-20 10:03 39 ******************** ... ..( 5 skipped). .. ******************** 78 2020-11-20 10:09 39 ******************** 79 2020-11-20 10:10 40 ********************* ... ..( 12 skipped). .. ********************* 92 2020-11-20 10:23 40 ********************* 93 2020-11-20 10:24 41 ********************** ... ..( 30 skipped). .. ********************** 124 2020-11-20 10:55 41 ********************** 125 2020-11-20 10:56 42 *********************** ... ..( 3 skipped). .. *********************** 1 2020-11-20 11:00 42 *********************** 2 2020-11-20 11:01 41 ********************** ... ..( 2 skipped). .. ********************** 5 2020-11-20 11:04 41 ********************** 6 2020-11-20 11:05 42 *********************** 7 2020-11-20 11:06 42 *********************** 8 2020-11-20 11:07 41 ********************** 9 2020-11-20 11:08 41 ********************** 10 2020-11-20 11:09 42 *********************** ... ..( 24 skipped). .. *********************** 35 2020-11-20 11:34 42 *********************** 36 2020-11-20 11:35 43 ************************ ... ..( 23 skipped). .. ************************ 60 2020-11-20 11:59 43 ************************ 61 2020-11-20 12:00 42 *********************** ... ..( 5 skipped). .. *********************** 67 2020-11-20 12:06 42 *********************** 68 2020-11-20 12:07 43 ************************ Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron] SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron] Read SATA Phy Event Counters failed