Log: smartctl
/dev/sda
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.13.9-desktop-3omv2590] (OpenMandriva Lx 7.4-1)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD2500BEVT-22A23T0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01A01
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Apr 27 21:52:28 2025 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 96 (intermediate level with standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 82) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 137 130 021 - 2133
4 Start_Stop_Count -O--CK 098 098 000 - 2138
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 243
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 235
192 Power-Off_Retract_Count -O--CK 200 200 000 - 24
193 Load_Cycle_Count -O--CK 192 192 000 - 26359
194 Temperature_Celsius -O---K 104 090 000 - 39
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 39 Celsius
Power Cycle Min/Max Temperature: 38/39 Celsius
Lifetime Min/Max Temperature: 36/53 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (113)
Index Estimated Time Temperature Celsius
114 2025-04-27 19:45 37 ******************
115 2025-04-27 19:46 37 ******************
116 2025-04-27 19:47 ? -
117 2025-04-27 19:48 37 ******************
118 2025-04-27 19:49 ? -
119 2025-04-27 19:50 37 ******************
120 2025-04-27 19:51 37 ******************
121 2025-04-27 19:52 ? -
122 2025-04-27 19:53 37 ******************
123 2025-04-27 19:54 37 ******************
124 2025-04-27 19:55 37 ******************
125 2025-04-27 19:56 ? -
126 2025-04-27 19:57 37 ******************
127 2025-04-27 19:58 37 ******************
0 2025-04-27 19:59 ? -
1 2025-04-27 20:00 37 ******************
2 2025-04-27 20:01 37 ******************
3 2025-04-27 20:02 37 ******************
4 2025-04-27 20:03 ? -
5 2025-04-27 20:04 37 ******************
6 2025-04-27 20:05 ? -
7 2025-04-27 20:06 37 ******************
8 2025-04-27 20:07 37 ******************
9 2025-04-27 20:08 ? -
10 2025-04-27 20:09 37 ******************
11 2025-04-27 20:10 37 ******************
12 2025-04-27 20:11 ? -
13 2025-04-27 20:12 37 ******************
14 2025-04-27 20:13 37 ******************
15 2025-04-27 20:14 ? -
16 2025-04-27 20:15 37 ******************
17 2025-04-27 20:16 ? -
18 2025-04-27 20:17 37 ******************
19 2025-04-27 20:18 37 ******************
20 2025-04-27 20:19 ? -
21 2025-04-27 20:20 37 ******************
22 2025-04-27 20:21 ? -
23 2025-04-27 20:22 37 ******************
24 2025-04-27 20:23 37 ******************
25 2025-04-27 20:24 ? -
26 2025-04-27 20:25 37 ******************
27 2025-04-27 20:26 ? -
28 2025-04-27 20:27 37 ******************
29 2025-04-27 20:28 37 ******************
30 2025-04-27 20:29 ? -
31 2025-04-27 20:30 37 ******************
32 2025-04-27 20:31 37 ******************
33 2025-04-27 20:32 ? -
34 2025-04-27 20:33 37 ******************
35 2025-04-27 20:34 37 ******************
36 2025-04-27 20:35 ? -
37 2025-04-27 20:36 37 ******************
38 2025-04-27 20:37 37 ******************
39 2025-04-27 20:38 ? -
40 2025-04-27 20:39 37 ******************
41 2025-04-27 20:40 ? -
42 2025-04-27 20:41 37 ******************
43 2025-04-27 20:42 ? -
44 2025-04-27 20:43 37 ******************
45 2025-04-27 20:44 37 ******************
46 2025-04-27 20:45 ? -
47 2025-04-27 20:46 37 ******************
48 2025-04-27 20:47 37 ******************
49 2025-04-27 20:48 ? -
50 2025-04-27 20:49 37 ******************
51 2025-04-27 20:50 37 ******************
52 2025-04-27 20:51 37 ******************
53 2025-04-27 20:52 ? -
54 2025-04-27 20:53 37 ******************
55 2025-04-27 20:54 37 ******************
56 2025-04-27 20:55 ? -
57 2025-04-27 20:56 37 ******************
58 2025-04-27 20:57 37 ******************
59 2025-04-27 20:58 ? -
60 2025-04-27 20:59 37 ******************
61 2025-04-27 21:00 37 ******************
62 2025-04-27 21:01 ? -
63 2025-04-27 21:02 37 ******************
64 2025-04-27 21:03 ? -
65 2025-04-27 21:04 37 ******************
66 2025-04-27 21:05 37 ******************
67 2025-04-27 21:06 ? -
68 2025-04-27 21:07 37 ******************
69 2025-04-27 21:08 37 ******************
70 2025-04-27 21:09 ? -
71 2025-04-27 21:10 37 ******************
72 2025-04-27 21:11 37 ******************
73 2025-04-27 21:12 37 ******************
74 2025-04-27 21:13 ? -
75 2025-04-27 21:14 37 ******************
76 2025-04-27 21:15 37 ******************
77 2025-04-27 21:16 ? -
78 2025-04-27 21:17 37 ******************
79 2025-04-27 21:18 37 ******************
80 2025-04-27 21:19 ? -
81 2025-04-27 21:20 37 ******************
82 2025-04-27 21:21 37 ******************
83 2025-04-27 21:22 ? -
84 2025-04-27 21:23 37 ******************
85 2025-04-27 21:24 ? -
86 2025-04-27 21:25 37 ******************
87 2025-04-27 21:26 37 ******************
88 2025-04-27 21:27 ? -
89 2025-04-27 21:28 37 ******************
90 2025-04-27 21:29 ? -
91 2025-04-27 21:30 37 ******************
92 2025-04-27 21:31 37 ******************
93 2025-04-27 21:32 ? -
94 2025-04-27 21:33 37 ******************
95 2025-04-27 21:34 ? -
96 2025-04-27 21:35 37 ******************
97 2025-04-27 21:36 37 ******************
98 2025-04-27 21:37 ? -
99 2025-04-27 21:38 37 ******************
100 2025-04-27 21:39 37 ******************
101 2025-04-27 21:40 ? -
102 2025-04-27 21:41 37 ******************
103 2025-04-27 21:42 ? -
104 2025-04-27 21:43 37 ******************
105 2025-04-27 21:44 ? -
106 2025-04-27 21:45 39 ********************
107 2025-04-27 21:46 38 *******************
108 2025-04-27 21:47 38 *******************
109 2025-04-27 21:48 39 ********************
... ..( 3 skipped). .. ********************
113 2025-04-27 21:52 39 ********************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 472 Vendor specific