/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.79-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: INTEL SSDPEKKW128G8 Serial Number: -- Firmware Version: 005C PCI Vendor/Subsystem ID: 0x8086 IEEE OUI Identifier: 0x5cd2e4 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 128,035,676,160 [128 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Fri Jan 6 17:17:23 2023 MSK Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 0 0 1 + 4.60W - - 1 1 1 1 0 0 2 + 3.80W - - 2 2 2 2 0 0 3 - 0.0450W - - 3 3 3 3 2000 2000 4 - 0.0040W - - 4 4 4 4 6000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 39 Celsius Available Spare: 100% Available Spare Threshold: 12% Percentage Used: 1% Data Units Read: 2,912,110 [1.49 TB] Data Units Written: 936,659 [479 GB] Host Read Commands: 37,996,449 Host Write Commands: 21,636,548 Controller Busy Time: 582 Power Cycles: 1,768 Power On Hours: 1,109 Unsafe Shutdowns: 259 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.79-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD7500BPVT-24HXZT3 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 03.01A03 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jan 6 17:17:23 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 161) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 184 175 021 - 1800 4 Start_Stop_Count -O--CK 093 093 000 - 7071 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 076 076 000 - 18159 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6882 192 Power-Off_Retract_Count -O--CK 200 200 000 - 190 193 Load_Cycle_Count -O--CK 001 001 000 - 1102776 194 Temperature_Celsius -O---K 108 083 000 - 39 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 9 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 20 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 20 [19] occurred at disk power-on lifetime: 18156 hours (756 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 36 c8 91 40 40 00 Error: UNC 8 sectors at LBA = 0x36c89140 = 919114048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 36 c8 91 40 40 00 03:05:27.283 READ DMA EXT 25 00 00 00 08 00 00 36 c8 91 38 40 00 03:05:27.283 READ DMA EXT 25 00 00 00 08 00 00 36 c8 91 30 40 00 03:05:27.283 READ DMA EXT 25 00 00 00 08 00 00 36 c8 91 28 40 00 03:05:27.283 READ DMA EXT 25 00 00 00 08 00 00 36 c8 91 20 40 00 03:05:27.282 READ DMA EXT Error 19 [18] occurred at disk power-on lifetime: 18156 hours (756 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 36 c8 91 40 40 00 Error: UNC 512 sectors at LBA = 0x36c89140 = 919114048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 36 c8 90 00 40 00 03:05:24.701 READ DMA EXT 25 00 00 02 00 00 00 36 c8 8e 00 40 00 03:05:24.697 READ DMA EXT 25 00 00 02 00 00 00 36 c8 8c 00 40 00 03:05:24.694 READ DMA EXT 25 00 00 02 00 00 00 36 c8 8a 00 40 00 03:05:24.647 READ DMA EXT 25 00 00 02 00 00 00 36 c8 88 00 40 00 03:05:24.644 READ DMA EXT Error 18 [17] occurred at disk power-on lifetime: 17666 hours (736 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 c8 b3 e0 40 00 Error: WP at LBA = 0x36c8b3e0 = 919122912 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 80 00 f8 00 00 1f 61 2e 90 40 08 06:46:49.538 WRITE FPDMA QUEUED 60 00 08 00 30 00 00 36 c8 b3 e0 40 08 06:46:49.538 READ FPDMA QUEUED 61 00 08 00 28 00 00 22 ec 27 98 40 08 06:46:49.535 WRITE FPDMA QUEUED 60 00 08 00 20 00 00 0c b6 ea d8 40 08 06:46:49.535 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 00 06:46:49.535 SET FEATURES [Enable SATA feature] Error 17 [16] occurred at disk power-on lifetime: 17666 hours (736 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 c8 b3 e0 40 00 Error: UNC at LBA = 0x36c8b3e0 = 919122912 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 48 00 00 36 c8 b3 e0 40 08 06:46:46.394 READ FPDMA QUEUED 60 00 08 00 40 00 00 36 c8 b3 d8 40 08 06:46:46.393 READ FPDMA QUEUED 60 00 08 00 38 00 00 36 c8 b3 d0 40 08 06:46:46.393 READ FPDMA QUEUED 60 00 08 00 b0 00 00 36 c8 b3 c8 40 08 06:46:46.393 READ FPDMA QUEUED 60 00 08 00 a8 00 00 36 c8 b3 c0 40 08 06:46:46.393 READ FPDMA QUEUED Error 16 [15] occurred at disk power-on lifetime: 17666 hours (736 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 c8 b3 e0 40 00 Error: UNC at LBA = 0x36c8b3e0 = 919122912 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 20 00 00 36 c8 b4 20 40 08 06:46:42.751 READ FPDMA QUEUED 60 01 00 00 18 00 00 36 c8 b3 20 40 08 06:46:42.751 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 06:46:42.728 FLUSH CACHE EXT 60 02 00 00 b8 00 00 36 c8 b1 20 40 08 06:46:42.684 READ FPDMA QUEUED 60 01 00 00 b0 00 00 36 c8 b0 20 40 08 06:46:42.684 READ FPDMA QUEUED Error 15 [14] occurred at disk power-on lifetime: 17665 hours (736 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 c8 b3 e0 40 00 Error: WP at LBA = 0x36c8b3e0 = 919122912 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 08 00 00 10 26 ea 98 40 08 06:29:43.198 WRITE FPDMA QUEUED 61 00 18 00 00 00 00 10 26 e9 08 40 08 06:29:43.198 WRITE FPDMA QUEUED 61 00 18 00 b0 00 00 1f 5e 1a 78 40 08 06:29:43.198 WRITE FPDMA QUEUED 61 00 08 00 f0 00 00 22 b3 48 00 40 08 06:29:43.196 WRITE FPDMA QUEUED 61 00 30 00 e8 00 00 10 26 e8 d0 40 08 06:29:43.196 WRITE FPDMA QUEUED Error 14 [13] occurred at disk power-on lifetime: 17665 hours (736 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 c8 b3 e0 40 00 Error: WP at LBA = 0x36c8b3e0 = 919122912 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 18 00 a8 00 00 10 26 e8 b0 40 08 06:29:40.025 WRITE FPDMA QUEUED 60 00 08 00 08 00 00 36 c8 b3 e0 40 08 06:29:40.023 READ FPDMA QUEUED 61 00 48 00 00 00 00 1f 5e 1a 28 40 08 06:29:40.023 WRITE FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 00 06:29:40.023 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 00 06:29:40.023 SET FEATURES [Enable SATA feature] Error 13 [12] occurred at disk power-on lifetime: 17665 hours (736 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 c8 b3 e0 40 00 Error: UNC at LBA = 0x36c8b3e0 = 919122912 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 78 00 00 36 c8 b3 e0 40 08 06:29:36.890 READ FPDMA QUEUED 60 00 f8 00 e8 00 00 22 b7 b3 00 40 08 06:29:35.996 READ FPDMA QUEUED 60 01 00 00 e0 00 00 22 b7 b2 00 40 08 06:29:35.989 READ FPDMA QUEUED 60 01 00 00 d8 00 00 22 b7 b1 00 40 08 06:29:35.986 READ FPDMA QUEUED 60 01 00 00 d0 00 00 22 b7 b0 00 40 08 06:29:35.973 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 18075 - # 2 Extended offline Completed without error 00% 17917 - # 3 Extended offline Completed: read failure 90% 17882 919114052 # 4 Extended offline Completed: read failure 90% 17856 919114048 # 5 Extended offline Completed: read failure 90% 17832 919108889 # 6 Extended offline Completed: read failure 90% 17797 919108889 # 7 Extended offline Completed: read failure 90% 17783 919108888 # 8 Extended offline Completed: read failure 90% 17738 919108888 # 9 Extended offline Completed: read failure 90% 17706 919108888 #10 Extended offline Completed: read failure 90% 17692 919108888 #11 Extended offline Completed: read failure 90% 17659 919108888 #12 Extended offline Completed: read failure 90% 17553 919108888 #13 Extended offline Completed: read failure 90% 17430 919108888 #14 Extended offline Completed: read failure 90% 17330 919108888 #15 Extended offline Completed: read failure 90% 17258 919108888 #16 Extended offline Completed: read failure 90% 17124 919108888 #17 Extended offline Completed: read failure 90% 17021 919108888 #18 Extended offline Completed: read failure 90% 16904 919108888 16 of 16 failed self-tests are outdated by newer successful extended offline self-test # 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 25/39 Celsius Lifetime Min/Max Temperature: 0/64 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (123) Index Estimated Time Temperature Celsius 124 2023-01-06 15:10 42 *********************** 125 2023-01-06 15:11 42 *********************** 126 2023-01-06 15:12 42 *********************** 127 2023-01-06 15:13 41 ********************** 0 2023-01-06 15:14 41 ********************** 1 2023-01-06 15:15 41 ********************** 2 2023-01-06 15:16 40 ********************* 3 2023-01-06 15:17 40 ********************* 4 2023-01-06 15:18 39 ******************** 5 2023-01-06 15:19 39 ******************** 6 2023-01-06 15:20 39 ******************** 7 2023-01-06 15:21 38 ******************* 8 2023-01-06 15:22 38 ******************* 9 2023-01-06 15:23 38 ******************* 10 2023-01-06 15:24 37 ****************** 11 2023-01-06 15:25 37 ****************** 12 2023-01-06 15:26 37 ****************** 13 2023-01-06 15:27 36 ***************** ... ..( 2 skipped). .. ***************** 16 2023-01-06 15:30 36 ***************** 17 2023-01-06 15:31 ? - 18 2023-01-06 15:32 25 ****** 19 2023-01-06 15:33 26 ******* 20 2023-01-06 15:34 26 ******* 21 2023-01-06 15:35 27 ******** 22 2023-01-06 15:36 27 ******** 23 2023-01-06 15:37 28 ********* 24 2023-01-06 15:38 28 ********* 25 2023-01-06 15:39 29 ********** 26 2023-01-06 15:40 30 *********** ... ..( 2 skipped). .. *********** 29 2023-01-06 15:43 30 *********** 30 2023-01-06 15:44 31 ************ 31 2023-01-06 15:45 31 ************ 32 2023-01-06 15:46 31 ************ 33 2023-01-06 15:47 32 ************* 34 2023-01-06 15:48 32 ************* 35 2023-01-06 15:49 33 ************** 36 2023-01-06 15:50 33 ************** 37 2023-01-06 15:51 33 ************** 38 2023-01-06 15:52 34 *************** ... ..( 10 skipped). .. *************** 49 2023-01-06 16:03 34 *************** 50 2023-01-06 16:04 33 ************** ... ..( 9 skipped). .. ************** 60 2023-01-06 16:14 33 ************** 61 2023-01-06 16:15 ? - 62 2023-01-06 16:16 33 ************** ... ..( 9 skipped). .. ************** 72 2023-01-06 16:26 33 ************** 73 2023-01-06 16:27 ? - 74 2023-01-06 16:28 25 ****** 75 2023-01-06 16:29 25 ****** 76 2023-01-06 16:30 26 ******* 77 2023-01-06 16:31 26 ******* 78 2023-01-06 16:32 26 ******* 79 2023-01-06 16:33 28 ********* 80 2023-01-06 16:34 29 ********** 81 2023-01-06 16:35 30 *********** ... ..( 2 skipped). .. *********** 84 2023-01-06 16:38 30 *********** 85 2023-01-06 16:39 31 ************ 86 2023-01-06 16:40 31 ************ 87 2023-01-06 16:41 32 ************* 88 2023-01-06 16:42 32 ************* 89 2023-01-06 16:43 33 ************** 90 2023-01-06 16:44 33 ************** 91 2023-01-06 16:45 33 ************** 92 2023-01-06 16:46 34 *************** ... ..( 4 skipped). .. *************** 97 2023-01-06 16:51 34 *************** 98 2023-01-06 16:52 35 **************** ... ..( 7 skipped). .. **************** 106 2023-01-06 17:00 35 **************** 107 2023-01-06 17:01 36 ***************** 108 2023-01-06 17:02 36 ***************** 109 2023-01-06 17:03 37 ****************** ... ..( 2 skipped). .. ****************** 112 2023-01-06 17:06 37 ****************** 113 2023-01-06 17:07 38 ******************* ... ..( 7 skipped). .. ******************* 121 2023-01-06 17:15 38 ******************* 122 2023-01-06 17:16 39 ******************** 123 2023-01-06 17:17 39 ******************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3182 Vendor specific