Probe #5c133ac35b of HP ProBook 430 G6

Log: smartctl

/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.65-1-MANJARO] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: MTFDHBA256TCK-1AS1AABHA Serial Number: -- Firmware Version: HPS0V23 PCI Vendor/Subsystem ID: 0x1344 IEEE OUI Identifier: 0x00a075 Controller ID: 0 NVMe Version: 1.2.1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00a075 ... Local Time is: Thu Sep 29 12:42:37 2022 IDT Firmware Updates (0x02): 1 Slot Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0017): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.25W - - 0 0 0 0 0 0 1 + 2.40W - - 1 1 1 1 0 0 2 + 1.90W - - 2 2 2 2 0 0 3 - 0.0800W - - 3 3 3 3 10000 2500 4 - 0.0050W - - 4 4 4 4 5000 44000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 51 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 35% Data Units Read: 80,201,461 [41.0 TB] Data Units Written: 44,448,012 [22.7 TB] Host Read Commands: 1,551,956,197 Host Write Commands: 766,012,277 Controller Busy Time: 23,048 Power Cycles: 1,869 Power On Hours: 1,256 Unsafe Shutdowns: 116 Media and Data Integrity Errors: 0 Error Information Log Entries: 104 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 51 Celsius Temperature Sensor 2: 54 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.65-1-MANJARO] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT02B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 29 12:42:37 2022 IDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6130 12 Power_Cycle_Count -O--CK 099 099 000 - 180 177 Wear_Leveling_Count PO--C- 093 093 000 - 118 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 047 000 - 32 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 29 241 Total_LBAs_Written -O--CK 099 099 000 - 62072339594 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 32/40 Celsius Lifetime Min/Max Temperature: 17/53 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (47) Index Estimated Time Temperature Celsius 48 2022-09-28 15:30 26 ******* 49 2022-09-28 15:40 27 ******** ... ..( 41 skipped). .. ******** 91 2022-09-28 22:40 27 ******** 92 2022-09-28 22:50 26 ******* 93 2022-09-28 23:00 27 ******** ... ..( 13 skipped). .. ******** 107 2022-09-29 01:20 27 ******** 108 2022-09-29 01:30 28 ********* 109 2022-09-29 01:40 29 ********** 110 2022-09-29 01:50 30 *********** 111 2022-09-29 02:00 30 *********** 112 2022-09-29 02:10 30 *********** 113 2022-09-29 02:20 31 ************ 114 2022-09-29 02:30 31 ************ 115 2022-09-29 02:40 ? - 116 2022-09-29 02:50 31 ************ 117 2022-09-29 03:00 31 ************ 118 2022-09-29 03:10 31 ************ 119 2022-09-29 03:20 32 ************* ... ..( 8 skipped). .. ************* 0 2022-09-29 04:50 32 ************* 1 2022-09-29 05:00 31 ************ 2 2022-09-29 05:10 31 ************ 3 2022-09-29 05:20 30 *********** 4 2022-09-29 05:30 30 *********** 5 2022-09-29 05:40 31 ************ 6 2022-09-29 05:50 31 ************ 7 2022-09-29 06:00 30 *********** 8 2022-09-29 06:10 30 *********** 9 2022-09-29 06:20 31 ************ 10 2022-09-29 06:30 31 ************ 11 2022-09-29 06:40 32 ************* 12 2022-09-29 06:50 ? - 13 2022-09-29 07:00 31 ************ 14 2022-09-29 07:10 30 *********** 15 2022-09-29 07:20 30 *********** 16 2022-09-29 07:30 30 *********** 17 2022-09-29 07:40 29 ********** 18 2022-09-29 07:50 29 ********** 19 2022-09-29 08:00 29 ********** 20 2022-09-29 08:10 28 ********* ... ..( 7 skipped). .. ********* 28 2022-09-29 09:30 28 ********* 29 2022-09-29 09:40 ? - 30 2022-09-29 09:50 29 ********** 31 2022-09-29 10:00 30 *********** 32 2022-09-29 10:10 31 ************ 33 2022-09-29 10:20 31 ************ 34 2022-09-29 10:30 32 ************* 35 2022-09-29 10:40 32 ************* 36 2022-09-29 10:50 33 ************** 37 2022-09-29 11:00 33 ************** 38 2022-09-29 11:10 32 ************* ... ..( 2 skipped). .. ************* 41 2022-09-29 11:40 32 ************* 42 2022-09-29 11:50 33 ************** 43 2022-09-29 12:00 ? - 44 2022-09-29 12:10 33 ************** 45 2022-09-29 12:20 32 ************* 46 2022-09-29 12:30 32 ************* 47 2022-09-29 12:40 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 180 --- Lifetime Power-On Resets 0x01 0x010 4 6130 --- Power-on Hours 0x01 0x018 6 62072339594 --- Logical Sectors Written 0x01 0x020 6 565146955 --- Number of Write Commands 0x01 0x028 6 36764577330 --- Logical Sectors Read 0x01 0x030 6 638405152 --- Number of Read Commands 0x01 0x038 6 3561000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 435 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 6 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 33 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub