/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-68.5rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST750LM022 HN-M750MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR20004 User Capacity: 750,156,374,016 bytes [750 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Mar 20 00:04:06 2020 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9720) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 162) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 9 2 Throughput_Performance -OS--K 055 055 000 - 8903 3 Spin_Up_Time PO---K 090 089 025 - 3065 4 Start_Stop_Count -O--CK 098 098 000 - 2360 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 12931 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 219 12 Power_Cycle_Count -O--CK 098 098 000 - 2377 13 Read_Soft_Error_Rate -O-RCK 100 100 000 - 0 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 10681132 191 G-Sense_Error_Rate -O---K 100 100 000 - 152 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 018 018 000 - 830292 194 Temperature_Celsius -O---- 064 049 000 - 32 (Min/Max 13/51) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 848 240 Head_Flying_Hours -O--CK 100 100 000 - 12199 241 Total_LBAs_Written -O--CK 098 094 000 - 3252716 242 Total_LBAs_Read -O--CK 097 093 000 - 5204880 254 Free_Fall_Sensor -O--CK 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 12796 - # 2 Extended offline Completed without error 00% 12628 - # 3 Extended offline Completed without error 00% 12460 - # 4 Extended offline Completed without error 00% 12292 - # 5 Extended offline Completed without error 00% 12124 - # 6 Extended offline Completed without error 00% 11956 - # 7 Extended offline Completed without error 00% 11791 - # 8 Extended offline Completed without error 00% 11623 - # 9 Extended offline Completed without error 00% 11401 - #10 Extended offline Completed without error 00% 11303 - #11 Extended offline Completed without error 00% 11200 - #12 Extended offline Completed without error 00% 11081 - #13 Extended offline Completed without error 00% 10940 - #14 Extended offline Completed without error 00% 10542 - #15 Extended offline Completed without error 00% 10409 - #16 Extended offline Completed without error 00% 10222 - #17 Extended offline Completed without error 00% 10143 - #18 Extended offline Completed without error 00% 10028 - #19 Extended offline Completed without error 00% 9877 - #20 Extended offline Completed without error 00% 9709 - #21 Short offline Completed without error 00% 1058 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 32/32 Celsius Lifetime Min/Max Temperature: 13/51 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (56) Index Estimated Time Temperature Celsius 57 2020-03-19 13:25 32 ************* 58 2020-03-19 13:30 38 ******************* ... ..( 11 skipped). .. ******************* 70 2020-03-19 14:30 38 ******************* 71 2020-03-19 14:35 37 ****************** 72 2020-03-19 14:40 38 ******************* ... ..( 27 skipped). .. ******************* 100 2020-03-19 17:00 38 ******************* 101 2020-03-19 17:05 37 ****************** ... ..( 12 skipped). .. ****************** 114 2020-03-19 18:10 37 ****************** 115 2020-03-19 18:15 36 ***************** ... ..( 3 skipped). .. ***************** 119 2020-03-19 18:35 36 ***************** 120 2020-03-19 18:40 35 **************** ... ..( 4 skipped). .. **************** 125 2020-03-19 19:05 35 **************** 126 2020-03-19 19:10 34 *************** 127 2020-03-19 19:15 34 *************** 0 2020-03-19 19:20 34 *************** 1 2020-03-19 19:25 35 **************** ... ..( 17 skipped). .. **************** 19 2020-03-19 20:55 35 **************** 20 2020-03-19 21:00 34 *************** ... ..( 3 skipped). .. *************** 24 2020-03-19 21:20 34 *************** 25 2020-03-19 21:25 35 **************** 26 2020-03-19 21:30 34 *************** ... ..( 12 skipped). .. *************** 39 2020-03-19 22:35 34 *************** 40 2020-03-19 22:40 24 ***** 41 2020-03-19 22:45 27 ******** 42 2020-03-19 22:50 29 ********** 43 2020-03-19 22:55 31 ************ ... ..( 3 skipped). .. ************ 47 2020-03-19 23:15 31 ************ 48 2020-03-19 23:20 32 ************* ... ..( 3 skipped). .. ************* 52 2020-03-19 23:40 32 ************* 53 2020-03-19 23:45 33 ************** 54 2020-03-19 23:50 34 *************** 55 2020-03-19 23:55 34 *************** 56 2020-03-20 00:00 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific