Probe #636e1381d0 of Samsung 355V4C

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST500LM012 HN-M500MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 500 107 862 016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Sep 16 19:34:30 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7020) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 117) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 095 095 025 - 1790 4 Start_Stop_Count -O--CK 100 100 000 - 26 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 145 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 2 12 Power_Cycle_Count -O--CK 100 100 000 - 28 191 G-Sense_Error_Rate -O---K 100 100 000 - 1 192 Power-Off_Retract_Count -O---K 100 100 000 - 1 194 Temperature_Celsius -O---- 056 048 000 - 44 (Min/Max 18/53) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 375 223 Load_Retry_Count -O--CK 100 100 000 - 2 225 Load_Cycle_Count -O--CK 099 099 000 - 18969 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 44 Celsius Power Cycle Min/Max Temperature: 28/47 Celsius Lifetime Min/Max Temperature: 18/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (124) Index Estimated Time Temperature Celsius 125 2016-09-16 08:55 44 ************************* 126 2016-09-16 09:00 40 ********************* 127 2016-09-16 09:05 40 ********************* 0 2016-09-16 09:10 41 ********************** 1 2016-09-16 09:15 41 ********************** 2 2016-09-16 09:20 42 *********************** 3 2016-09-16 09:25 42 *********************** 4 2016-09-16 09:30 43 ************************ ... ..( 3 skipped). .. ************************ 8 2016-09-16 09:50 43 ************************ 9 2016-09-16 09:55 42 *********************** 10 2016-09-16 10:00 42 *********************** 11 2016-09-16 10:05 42 *********************** 12 2016-09-16 10:10 41 ********************** 13 2016-09-16 10:15 41 ********************** 14 2016-09-16 10:20 41 ********************** 15 2016-09-16 10:25 40 ********************* 16 2016-09-16 10:30 40 ********************* 17 2016-09-16 10:35 40 ********************* 18 2016-09-16 10:40 22 *** 19 2016-09-16 10:45 24 ***** 20 2016-09-16 10:50 28 ********* 21 2016-09-16 10:55 31 ************ 22 2016-09-16 11:00 32 ************* 23 2016-09-16 11:05 34 *************** 24 2016-09-16 11:10 35 **************** 25 2016-09-16 11:15 36 ***************** 26 2016-09-16 11:20 37 ****************** 27 2016-09-16 11:25 37 ****************** 28 2016-09-16 11:30 37 ****************** 29 2016-09-16 11:35 38 ******************* ... ..( 3 skipped). .. ******************* 33 2016-09-16 11:55 38 ******************* 34 2016-09-16 12:00 39 ******************** ... ..( 2 skipped). .. ******************** 37 2016-09-16 12:15 39 ******************** 38 2016-09-16 12:20 38 ******************* 39 2016-09-16 12:25 39 ******************** 40 2016-09-16 12:30 40 ********************* ... ..( 2 skipped). .. ********************* 43 2016-09-16 12:45 40 ********************* 44 2016-09-16 12:50 39 ******************** ... ..( 3 skipped). .. ******************** 48 2016-09-16 13:10 39 ******************** 49 2016-09-16 13:15 40 ********************* 50 2016-09-16 13:20 40 ********************* 51 2016-09-16 13:25 41 ********************** 52 2016-09-16 13:30 42 *********************** 53 2016-09-16 13:35 42 *********************** 54 2016-09-16 13:40 41 ********************** 55 2016-09-16 13:45 40 ********************* 56 2016-09-16 13:50 40 ********************* 57 2016-09-16 13:55 39 ******************** ... ..( 2 skipped). .. ******************** 60 2016-09-16 14:10 39 ******************** 61 2016-09-16 14:15 40 ********************* 62 2016-09-16 14:20 41 ********************** ... ..( 2 skipped). .. ********************** 65 2016-09-16 14:35 41 ********************** 66 2016-09-16 14:40 40 ********************* 67 2016-09-16 14:45 39 ******************** 68 2016-09-16 14:50 39 ******************** 69 2016-09-16 14:55 40 ********************* 70 2016-09-16 15:00 41 ********************** 71 2016-09-16 15:05 41 ********************** 72 2016-09-16 15:10 42 *********************** 73 2016-09-16 15:15 42 *********************** 74 2016-09-16 15:20 42 *********************** 75 2016-09-16 15:25 41 ********************** 76 2016-09-16 15:30 40 ********************* 77 2016-09-16 15:35 40 ********************* 78 2016-09-16 15:40 40 ********************* 79 2016-09-16 15:45 39 ******************** ... ..( 15 skipped). .. ******************** 95 2016-09-16 17:05 39 ******************** 96 2016-09-16 17:10 38 ******************* 97 2016-09-16 17:15 39 ******************** 98 2016-09-16 17:20 39 ******************** 99 2016-09-16 17:25 40 ********************* 100 2016-09-16 17:30 41 ********************** 101 2016-09-16 17:35 31 ************ 102 2016-09-16 17:40 34 *************** 103 2016-09-16 17:45 36 ***************** 104 2016-09-16 17:50 38 ******************* 105 2016-09-16 17:55 39 ******************** 106 2016-09-16 18:00 40 ********************* 107 2016-09-16 18:05 41 ********************** 108 2016-09-16 18:10 42 *********************** 109 2016-09-16 18:15 43 ************************ 110 2016-09-16 18:20 44 ************************* 111 2016-09-16 18:25 45 ************************** 112 2016-09-16 18:30 46 *************************** 113 2016-09-16 18:35 46 *************************** 114 2016-09-16 18:40 46 *************************** 115 2016-09-16 18:45 47 **************************** ... ..( 2 skipped). .. **************************** 118 2016-09-16 19:00 47 **************************** 119 2016-09-16 19:05 46 *************************** 120 2016-09-16 19:10 45 ************************** 121 2016-09-16 19:15 45 ************************** 122 2016-09-16 19:20 45 ************************** 123 2016-09-16 19:25 44 ************************* 124 2016-09-16 19:30 44 ************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific


Hardware for Linux and BSD

GitHub