Probe #649f4ec8c6 of MSI B450M-A PRO MAX Desktop Computer (MS-7C52)

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.10.118-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Apacer AS350 512GB Serial Number: -- LU WWN Device Id: 5 3a5a27 ... Firmware Version: SN07181 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Oct 1 22:43:07 2022 +11 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 20 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 7326 12 Power_Cycle_Count -O--C- 100 100 000 - 992 164 Unknown_Attribute -O--C- 200 200 000 - 35398 165 Unknown_Attribute -O--CK 200 200 000 - 100 166 Unknown_Attribute -O--CK 200 200 000 - 13 167 Unknown_Attribute -O--CK 200 200 000 - 81 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 027 027 000 - 27 (Min/Max 15/35) 195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 232 Available_Reservd_Space -O--CK 100 100 000 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 399848 242 Total_LBAs_Read -O--CK 100 100 000 - 259549 245 Unknown_Attribute -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 10 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10 [9] occurred at disk power-on lifetime: 3408 hours (142 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 07:08:09.100 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 07:08:09.100 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 07:08:09.000 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 07:08:04.500 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 07:08:01.100 FLUSH CACHE EXT Error 9 [8] occurred at disk power-on lifetime: 3356 hours (139 days + 20 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 19:27:22.600 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 19:27:22.600 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 19:27:22.200 FLUSH CACHE EXT 06 00 01 00 01 00 00 00 00 00 00 e0 80 19:27:19.900 DATA SET MANAGEMENT ea 00 00 00 00 00 00 00 00 00 00 a0 80 19:27:17.500 FLUSH CACHE EXT Error 8 [7] occurred at disk power-on lifetime: 3339 hours (139 days + 3 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 02:53:45.000 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 02:53:45.000 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 02:53:44.700 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 02:53:43.300 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 02:53:43.000 FLUSH CACHE EXT Error 7 [6] occurred at disk power-on lifetime: 3327 hours (138 days + 15 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 13:35:54.500 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 13:35:54.500 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 13:35:54.400 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 13:35:54.400 FLUSH CACHE EXT 06 00 01 00 01 00 00 00 00 00 00 e0 80 13:35:51.900 DATA SET MANAGEMENT Error 6 [5] occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 13:00:27.500 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 13:00:27.500 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 13:00:27.500 FLUSH CACHE EXT 06 00 01 00 01 00 00 00 00 00 00 e0 80 13:00:25.100 DATA SET MANAGEMENT ea 00 00 00 00 00 00 00 00 00 00 a0 80 13:00:25.100 FLUSH CACHE EXT Error 5 [4] occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 12:39:47.800 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 12:39:47.800 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:39:47.800 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:39:45.600 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:39:42.100 FLUSH CACHE EXT Error 4 [3] occurred at disk power-on lifetime: 3326 hours (138 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 12:39:28.600 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 12:39:28.500 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:39:28.400 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:39:28.400 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 12:39:28.400 FLUSH CACHE EXT Error 3 [2] occurred at disk power-on lifetime: 3291 hours (137 days + 3 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: IDNF at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 31 00 f1 00 01 00 00 00 00 00 00 a0 80 10:01:25.600 WRITE SECTOR(S) (w/o retry) [OBS-5] e0 00 00 00 6f 00 00 00 fa ef fe af 80 10:01:25.500 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 80 10:01:21.600 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 10:01:21.200 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 80 10:01:19.800 FLUSH CACHE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 7311 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: ?/29 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (376) Index Estimated Time Temperature Celsius 377 2022-10-01 14:46 26 ******* ... ..( 2 skipped). .. ******* 380 2022-10-01 14:49 26 ******* 381 2022-10-01 14:50 27 ******** 382 2022-10-01 14:51 26 ******* 383 2022-10-01 14:52 27 ******** 384 2022-10-01 14:53 27 ******** 385 2022-10-01 14:54 27 ******** 386 2022-10-01 14:55 26 ******* 387 2022-10-01 14:56 26 ******* 388 2022-10-01 14:57 27 ******** 389 2022-10-01 14:58 27 ******** 390 2022-10-01 14:59 26 ******* 391 2022-10-01 15:00 27 ******** ... ..( 11 skipped). .. ******** 403 2022-10-01 15:12 27 ******** 404 2022-10-01 15:13 26 ******* 405 2022-10-01 15:14 27 ******** 406 2022-10-01 15:15 26 ******* 407 2022-10-01 15:16 27 ******** ... ..( 10 skipped). .. ******** 418 2022-10-01 15:27 27 ******** 419 2022-10-01 15:28 26 ******* 420 2022-10-01 15:29 26 ******* 421 2022-10-01 15:30 26 ******* 422 2022-10-01 15:31 27 ******** ... ..( 3 skipped). .. ******** 426 2022-10-01 15:35 27 ******** 427 2022-10-01 15:36 26 ******* 428 2022-10-01 15:37 26 ******* 429 2022-10-01 15:38 27 ******** 430 2022-10-01 15:39 26 ******* 431 2022-10-01 15:40 27 ******** 432 2022-10-01 15:41 26 ******* 433 2022-10-01 15:42 27 ******** 434 2022-10-01 15:43 26 ******* 435 2022-10-01 15:44 27 ******** 436 2022-10-01 15:45 26 ******* 437 2022-10-01 15:46 27 ******** 438 2022-10-01 15:47 27 ******** 439 2022-10-01 15:48 27 ******** 440 2022-10-01 15:49 26 ******* 441 2022-10-01 15:50 27 ******** 442 2022-10-01 15:51 26 ******* 443 2022-10-01 15:52 27 ******** ... ..( 2 skipped). .. ******** 446 2022-10-01 15:55 27 ******** 447 2022-10-01 15:56 26 ******* 448 2022-10-01 15:57 26 ******* 449 2022-10-01 15:58 27 ******** 450 2022-10-01 15:59 26 ******* 451 2022-10-01 16:00 27 ******** ... ..( 3 skipped). .. ******** 455 2022-10-01 16:04 27 ******** 456 2022-10-01 16:05 26 ******* 457 2022-10-01 16:06 27 ******** 458 2022-10-01 16:07 27 ******** 459 2022-10-01 16:08 26 ******* 460 2022-10-01 16:09 27 ******** 461 2022-10-01 16:10 27 ******** 462 2022-10-01 16:11 26 ******* 463 2022-10-01 16:12 27 ******** 464 2022-10-01 16:13 27 ******** 465 2022-10-01 16:14 26 ******* 466 2022-10-01 16:15 27 ******** 467 2022-10-01 16:16 27 ******** 468 2022-10-01 16:17 27 ******** 469 2022-10-01 16:18 26 ******* 470 2022-10-01 16:19 27 ******** ... ..( 5 skipped). .. ******** 476 2022-10-01 16:25 27 ******** 477 2022-10-01 16:26 26 ******* 0 2022-10-01 16:27 27 ******** 1 2022-10-01 16:28 27 ******** 2 2022-10-01 16:29 27 ******** 3 2022-10-01 16:30 26 ******* 4 2022-10-01 16:31 27 ******** 5 2022-10-01 16:32 27 ******** 6 2022-10-01 16:33 27 ******** 7 2022-10-01 16:34 26 ******* 8 2022-10-01 16:35 27 ******** ... ..( 5 skipped). .. ******** 14 2022-10-01 16:41 27 ******** 15 2022-10-01 16:42 26 ******* 16 2022-10-01 16:43 27 ******** 17 2022-10-01 16:44 27 ******** 18 2022-10-01 16:45 27 ******** 19 2022-10-01 16:46 26 ******* 20 2022-10-01 16:47 26 ******* 21 2022-10-01 16:48 27 ******** 22 2022-10-01 16:49 26 ******* 23 2022-10-01 16:50 26 ******* 24 2022-10-01 16:51 26 ******* 25 2022-10-01 16:52 27 ******** 26 2022-10-01 16:53 27 ******** 27 2022-10-01 16:54 26 ******* 28 2022-10-01 16:55 27 ******** ... ..( 2 skipped). .. ******** 31 2022-10-01 16:58 27 ******** 32 2022-10-01 16:59 26 ******* 33 2022-10-01 17:00 27 ******** 34 2022-10-01 17:01 26 ******* ... ..( 8 skipped). .. ******* 43 2022-10-01 17:10 26 ******* 44 2022-10-01 17:11 27 ******** 45 2022-10-01 17:12 27 ******** 46 2022-10-01 17:13 26 ******* 47 2022-10-01 17:14 27 ******** 48 2022-10-01 17:15 26 ******* 49 2022-10-01 17:16 26 ******* 50 2022-10-01 17:17 27 ******** 51 2022-10-01 17:18 27 ******** 52 2022-10-01 17:19 26 ******* ... ..( 4 skipped). .. ******* 57 2022-10-01 17:24 26 ******* 58 2022-10-01 17:25 27 ******** 59 2022-10-01 17:26 26 ******* 60 2022-10-01 17:27 26 ******* 61 2022-10-01 17:28 26 ******* 62 2022-10-01 17:29 27 ******** 63 2022-10-01 17:30 26 ******* 64 2022-10-01 17:31 27 ******** 65 2022-10-01 17:32 26 ******* 66 2022-10-01 17:33 27 ******** 67 2022-10-01 17:34 26 ******* 68 2022-10-01 17:35 26 ******* 69 2022-10-01 17:36 27 ******** 70 2022-10-01 17:37 26 ******* 71 2022-10-01 17:38 27 ******** 72 2022-10-01 17:39 26 ******* 73 2022-10-01 17:40 26 ******* 74 2022-10-01 17:41 26 ******* 75 2022-10-01 17:42 27 ******** 76 2022-10-01 17:43 26 ******* 77 2022-10-01 17:44 27 ******** 78 2022-10-01 17:45 27 ******** 79 2022-10-01 17:46 27 ******** 80 2022-10-01 17:47 26 ******* 81 2022-10-01 17:48 26 ******* 82 2022-10-01 17:49 26 ******* 83 2022-10-01 17:50 27 ******** ... ..( 2 skipped). .. ******** 86 2022-10-01 17:53 27 ******** 87 2022-10-01 17:54 26 ******* 88 2022-10-01 17:55 27 ******** 89 2022-10-01 17:56 27 ******** 90 2022-10-01 17:57 26 ******* 91 2022-10-01 17:58 26 ******* 92 2022-10-01 17:59 27 ******** 93 2022-10-01 18:00 26 ******* 94 2022-10-01 18:01 27 ******** 95 2022-10-01 18:02 27 ******** 96 2022-10-01 18:03 27 ******** 97 2022-10-01 18:04 26 ******* 98 2022-10-01 18:05 27 ******** ... ..( 17 skipped). .. ******** 116 2022-10-01 18:23 27 ******** 117 2022-10-01 18:24 26 ******* 118 2022-10-01 18:25 26 ******* 119 2022-10-01 18:26 27 ******** 120 2022-10-01 18:27 27 ******** 121 2022-10-01 18:28 26 ******* 122 2022-10-01 18:29 26 ******* 123 2022-10-01 18:30 26 ******* 124 2022-10-01 18:31 27 ******** 125 2022-10-01 18:32 27 ******** 126 2022-10-01 18:33 26 ******* ... ..( 7 skipped). .. ******* 134 2022-10-01 18:41 26 ******* 135 2022-10-01 18:42 27 ******** 136 2022-10-01 18:43 26 ******* 137 2022-10-01 18:44 27 ******** 138 2022-10-01 18:45 26 ******* 139 2022-10-01 18:46 26 ******* 140 2022-10-01 18:47 27 ******** 141 2022-10-01 18:48 26 ******* 142 2022-10-01 18:49 27 ******** 143 2022-10-01 18:50 26 ******* ... ..( 4 skipped). .. ******* 148 2022-10-01 18:55 26 ******* 149 2022-10-01 18:56 27 ******** 150 2022-10-01 18:57 26 ******* ... ..( 4 skipped). .. ******* 155 2022-10-01 19:02 26 ******* 156 2022-10-01 19:03 27 ******** 157 2022-10-01 19:04 27 ******** 158 2022-10-01 19:05 26 ******* 159 2022-10-01 19:06 26 ******* 160 2022-10-01 19:07 27 ******** 161 2022-10-01 19:08 27 ******** 162 2022-10-01 19:09 26 ******* ... ..( 12 skipped). .. ******* 175 2022-10-01 19:22 26 ******* 176 2022-10-01 19:23 27 ******** ... ..( 6 skipped). .. ******** 183 2022-10-01 19:30 27 ******** 184 2022-10-01 19:31 28 ********* 185 2022-10-01 19:32 28 ********* 186 2022-10-01 19:33 27 ******** 187 2022-10-01 19:34 28 ********* ... ..( 27 skipped). .. ********* 215 2022-10-01 20:02 28 ********* 216 2022-10-01 20:03 27 ******** 217 2022-10-01 20:04 27 ******** 218 2022-10-01 20:05 28 ********* 219 2022-10-01 20:06 27 ******** ... ..( 7 skipped). .. ******** 227 2022-10-01 20:14 27 ******** 228 2022-10-01 20:15 26 ******* 229 2022-10-01 20:16 27 ******** ... ..( 41 skipped). .. ******** 271 2022-10-01 20:58 27 ******** 272 2022-10-01 20:59 26 ******* 273 2022-10-01 21:00 27 ******** ... ..( 3 skipped). .. ******** 277 2022-10-01 21:04 27 ******** 278 2022-10-01 21:05 26 ******* 279 2022-10-01 21:06 27 ******** ... ..( 6 skipped). .. ******** 286 2022-10-01 21:13 27 ******** 287 2022-10-01 21:14 26 ******* 288 2022-10-01 21:15 26 ******* 289 2022-10-01 21:16 27 ******** ... ..( 4 skipped). .. ******** 294 2022-10-01 21:21 27 ******** 295 2022-10-01 21:22 26 ******* 296 2022-10-01 21:23 27 ******** ... ..( 5 skipped). .. ******** 302 2022-10-01 21:29 27 ******** 303 2022-10-01 21:30 26 ******* ... ..( 3 skipped). .. ******* 307 2022-10-01 21:34 26 ******* 308 2022-10-01 21:35 27 ******** 309 2022-10-01 21:36 26 ******* 310 2022-10-01 21:37 26 ******* 311 2022-10-01 21:38 26 ******* 312 2022-10-01 21:39 27 ******** 313 2022-10-01 21:40 26 ******* 314 2022-10-01 21:41 26 ******* 315 2022-10-01 21:42 27 ******** 316 2022-10-01 21:43 26 ******* 317 2022-10-01 21:44 27 ******** 318 2022-10-01 21:45 26 ******* 319 2022-10-01 21:46 26 ******* 320 2022-10-01 21:47 27 ******** 321 2022-10-01 21:48 27 ******** 322 2022-10-01 21:49 27 ******** 323 2022-10-01 21:50 26 ******* 324 2022-10-01 21:51 27 ******** ... ..( 45 skipped). .. ******** 370 2022-10-01 22:37 27 ******** 371 2022-10-01 22:38 26 ******* 372 2022-10-01 22:39 27 ******** ... ..( 3 skipped). .. ******** 376 2022-10-01 22:43 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 992 --- Lifetime Power-On Resets 0x01 0x010 4 7326 --- Power-on Hours 0x01 0x018 6 26204470924 --- Logical Sectors Written 0x01 0x020 6 274864942 --- Number of Write Commands 0x01 0x028 6 17009828177 --- Logical Sectors Read 0x01 0x030 6 259002221 --- Number of Read Commands 0x01 0x038 6 6752293395836 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 4 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 10 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.10.118-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate BarraCuda 3.5 (CMR) Device Model: ST1000DM010-2EP102 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC43 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Oct 1 22:43:07 2022 +11 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 109) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 063 006 - 74956580 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7972 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 083 060 045 - 215329181 9 Power_On_Hours -O--CK 073 073 000 - 24179 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3430 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 3 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 060 040 - 33 (Min/Max 19/34) 193 Load_Cycle_Count -O--CK 096 096 000 - 8736 194 Temperature_Celsius -O---K 033 016 000 - 33 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 003 001 000 - 74956580 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 19762h+36m+46.932s 241 Total_LBAs_Written ------ 100 253 000 - 93807387577 242 Total_LBAs_Read ------ 100 253 000 - 101357881400 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4120 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4800 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 24164 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 19/34 Celsius Lifetime Min/Max Temperature: 16/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3430 --- Lifetime Power-On Resets 0x01 0x010 4 24179 --- Power-on Hours 0x01 0x018 6 93946914876 --- Logical Sectors Written 0x01 0x020 6 384779145 --- Number of Write Commands 0x01 0x028 6 101662128188 --- Logical Sectors Read 0x01 0x030 6 662135507 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 569 N-- Spindle Motor Power-on Hours 0x03 0x010 4 569 N-- Head Flying Hours 0x03 0x018 4 8736 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 32 --- Average Short Term Temperature 0x05 0x018 1 31 --- Average Long Term Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 36 --- Highest Average Short Term Temperature 0x05 0x038 1 26 --- Lowest Average Short Term Temperature 0x05 0x040 1 33 --- Highest Average Long Term Temperature 0x05 0x048 1 27 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 13 --- Specified Minimum Operating Temperature |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.10.118-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Marvell based SanDisk SSDs Device Model: SanDisk SSD G5 BICS4 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 415000WD User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Oct 1 22:43:08 2022 +11 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 100 100 --- - 11711 12 Power_Cycle_Count -O--CK 100 100 --- - 1571 165 Total_Write/Erase_Count -O--CK 100 100 --- - 64291626 166 Min_W/E_Cycle -O--CK 100 100 --- - 3 167 Min_Bad_Block/Die -O--CK 100 100 --- - 76 168 Maximum_Erase_Cycle -O--CK 100 100 --- - 21 169 Total_Bad_Block -O--CK 100 100 --- - 677 170 Unknown_Marvell_Attr -O--CK 100 100 --- - 0 171 Program_Fail_Count -O--CK 100 100 --- - 0 172 Erase_Fail_Count -O--CK 100 100 --- - 0 173 Avg_Write/Erase_Count -O--CK 100 100 --- - 10 174 Unexpect_Power_Loss_Ct -O--CK 100 100 --- - 204 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 --- - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 071 053 --- - 29 (Min/Max 21/53) 199 SATA_CRC_Error -O--CK 100 100 --- - 0 230 Perc_Write/Erase_Count -O--CK 001 001 --- - 318 256 318 232 Perc_Avail_Resrvd_Space PO--CK 100 100 004 - 100 233 Total_NAND_Writes_GiB -O--CK 100 100 --- - 11130 234 Perc_Write/Erase_Ct_BC -O--CK 100 100 --- - 12049 241 Total_Writes_GiB ----CK 253 253 --- - 11602 242 Total_Reads_GiB ----CK 253 253 --- - 26185 244 Thermal_Throttle -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 1957 Current Device Internal Status Data log 0x25 GPL R/O 1957 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1571 --- Lifetime Power-On Resets 0x01 0x010 4 11711 --- Power-on Hours 0x01 0x018 6 24332197854 --- Logical Sectors Written 0x01 0x020 6 99971794 --- Number of Write Commands 0x01 0x028 6 54915501270 --- Logical Sectors Read 0x01 0x030 6 2143655769421 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET


Hardware for Linux and BSD

GitHub