Probe #64fec98df4 of Dell Latitude D630

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD1200BEVS-22UST0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Thu Nov 28 21:47:32 2019 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 159 155 021 - 1041 4 Start_Stop_Count -O--CK 096 096 000 - 4006 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 088 088 000 - 9481 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3485 192 Power-Off_Retract_Count -O--CK 200 200 000 - 152 193 Load_Cycle_Count -O--CK 074 074 000 - 378580 194 Temperature_Celsius -O---K 110 090 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 100 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 21/33 Celsius Lifetime Min/Max Temperature: 26/54 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (57) Index Estimated Time Temperature Celsius 58 2019-11-28 19:40 23 **** 59 2019-11-28 19:41 24 ***** 60 2019-11-28 19:42 26 ******* 61 2019-11-28 19:43 26 ******* 62 2019-11-28 19:44 27 ******** 63 2019-11-28 19:45 ? - 64 2019-11-28 19:46 21 ** 65 2019-11-28 19:47 21 ** 66 2019-11-28 19:48 22 *** 67 2019-11-28 19:49 23 **** 68 2019-11-28 19:50 23 **** 69 2019-11-28 19:51 24 ***** 70 2019-11-28 19:52 25 ****** 71 2019-11-28 19:53 26 ******* 72 2019-11-28 19:54 27 ******** ... ..( 2 skipped). .. ******** 75 2019-11-28 19:57 27 ******** 76 2019-11-28 19:58 28 ********* 77 2019-11-28 19:59 28 ********* 78 2019-11-28 20:00 29 ********** 79 2019-11-28 20:01 28 ********* 80 2019-11-28 20:02 29 ********** 81 2019-11-28 20:03 30 *********** ... ..( 2 skipped). .. *********** 84 2019-11-28 20:06 30 *********** 85 2019-11-28 20:07 31 ************ 86 2019-11-28 20:08 31 ************ 87 2019-11-28 20:09 31 ************ 88 2019-11-28 20:10 32 ************* 89 2019-11-28 20:11 32 ************* 90 2019-11-28 20:12 32 ************* 91 2019-11-28 20:13 33 ************** 92 2019-11-28 20:14 34 *************** 93 2019-11-28 20:15 34 *************** 94 2019-11-28 20:16 35 **************** ... ..( 17 skipped). .. **************** 112 2019-11-28 20:34 35 **************** 113 2019-11-28 20:35 36 ***************** 114 2019-11-28 20:36 36 ***************** 115 2019-11-28 20:37 36 ***************** 116 2019-11-28 20:38 35 **************** 117 2019-11-28 20:39 35 **************** 118 2019-11-28 20:40 36 ***************** ... ..( 10 skipped). .. ***************** 1 2019-11-28 20:51 36 ***************** 2 2019-11-28 20:52 37 ****************** 3 2019-11-28 20:53 36 ***************** 4 2019-11-28 20:54 36 ***************** 5 2019-11-28 20:55 36 ***************** 6 2019-11-28 20:56 37 ****************** ... ..( 4 skipped). .. ****************** 11 2019-11-28 21:01 37 ****************** 12 2019-11-28 21:02 ? - 13 2019-11-28 21:03 21 ** ... ..( 2 skipped). .. ** 16 2019-11-28 21:06 21 ** 17 2019-11-28 21:07 22 *** 18 2019-11-28 21:08 22 *** 19 2019-11-28 21:09 23 **** 20 2019-11-28 21:10 24 ***** 21 2019-11-28 21:11 25 ****** 22 2019-11-28 21:12 26 ******* 23 2019-11-28 21:13 26 ******* 24 2019-11-28 21:14 27 ******** 25 2019-11-28 21:15 28 ********* ... ..( 3 skipped). .. ********* 29 2019-11-28 21:19 28 ********* 30 2019-11-28 21:20 29 ********** 31 2019-11-28 21:21 29 ********** 32 2019-11-28 21:22 30 *********** ... ..( 2 skipped). .. *********** 35 2019-11-28 21:25 30 *********** 36 2019-11-28 21:26 31 ************ ... ..( 2 skipped). .. ************ 39 2019-11-28 21:29 31 ************ 40 2019-11-28 21:30 32 ************* 41 2019-11-28 21:31 31 ************ 42 2019-11-28 21:32 32 ************* ... ..( 2 skipped). .. ************* 45 2019-11-28 21:35 32 ************* 46 2019-11-28 21:36 33 ************** 47 2019-11-28 21:37 33 ************** 48 2019-11-28 21:38 32 ************* 49 2019-11-28 21:39 32 ************* 50 2019-11-28 21:40 33 ************** ... ..( 5 skipped). .. ************** 56 2019-11-28 21:46 33 ************** 57 2019-11-28 21:47 ? - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x8000 4 2684 Vendor specific


Hardware for Linux and BSD

GitHub