/dev/sda === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721050CLA362 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP2OA3GH User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Mar 27 22:21:20 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5096) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 085 016 - 0 2 Throughput_Performance POS--K 134 100 054 - 101 3 Spin_Up_Time PO---K 120 100 024 - 183 (Average 198) 4 Start_Stop_Count -O---K 100 100 000 - 1945 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 140 100 020 - 30 9 Power_On_Hours -O--CK 099 099 000 - 12740 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1371 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 185 Unknown_Attribute -O--CK 100 100 000 - 65535 187 Reported_Uncorrect -O--CK 001 001 000 - 336 188 Command_Timeout -O--CK 100 096 000 - 368 189 High_Fly_Writes -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 056 000 - 31 (Min/Max 30/31) 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1945 193 Load_Cycle_Count -O--CK 099 099 000 - 1945 194 Temperature_Celsius -O---- 193 136 000 - 31 (Min/Max 15/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 12689 - # 2 Extended offline Completed without error 00% 12611 - # 3 Extended offline Completed without error 00% 12586 - # 4 Extended offline Completed without error 00% 12556 - # 5 Extended offline Completed without error 00% 12504 - # 6 Extended offline Completed without error 00% 12440 - # 7 Extended offline Completed without error 00% 12374 - # 8 Extended offline Completed without error 00% 12302 - # 9 Extended offline Completed without error 00% 12235 - #10 Extended offline Completed without error 00% 12178 - #11 Extended offline Completed without error 00% 12151 - #12 Extended offline Completed without error 00% 12133 - #13 Extended offline Completed without error 00% 12046 - #14 Extended offline Completed without error 00% 11969 - #15 Extended offline Completed without error 00% 11866 - #16 Extended offline Completed without error 00% 11791 - #17 Extended offline Interrupted (host reset) 50% 11761 - #18 Extended offline Completed without error 00% 11644 - #19 Extended offline Completed without error 00% 11590 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 30/31 Celsius Lifetime Min/Max Temperature: 15/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (127) Index Estimated Time Temperature Celsius 0 2017-03-27 20:14 29 ********** 1 2017-03-27 20:15 29 ********** 2 2017-03-27 20:16 30 *********** ... ..( 5 skipped). .. *********** 8 2017-03-27 20:22 30 *********** 9 2017-03-27 20:23 ? - 10 2017-03-27 20:24 ? - 11 2017-03-27 20:25 30 *********** ... ..( 12 skipped). .. *********** 24 2017-03-27 20:38 30 *********** 25 2017-03-27 20:39 29 ********** ... ..( 68 skipped). .. ********** 94 2017-03-27 21:48 29 ********** 95 2017-03-27 21:49 30 *********** ... ..( 25 skipped). .. *********** 121 2017-03-27 22:15 30 *********** 122 2017-03-27 22:16 ? - 123 2017-03-27 22:17 30 *********** 124 2017-03-27 22:18 30 *********** 125 2017-03-27 22:19 ? - 126 2017-03-27 22:20 30 *********** 127 2017-03-27 22:21 31 ************ SCT Error Recovery Control: Read: 85 (8,5 seconds) Write: 85 (8,5 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1371 --- Lifetime Power-On Resets 0x01 0x010 4 12740 --- Power-on Hours 0x01 0x018 6 8379696843 --- Logical Sectors Written 0x01 0x020 6 175552870 --- Number of Write Commands 0x01 0x028 6 135315579163 --- Logical Sectors Read 0x01 0x030 6 152465845 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 12341 --- Spindle Motor Power-on Hours 0x03 0x010 4 12341 --- Head Flying Hours 0x03 0x018 4 1945 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 361 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 336 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 368 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 30 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 39 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 36 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1958 --- Number of Hardware Resets 0x06 0x010 4 408 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS