/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3500630A Serial Number: -- Firmware Version: 3.AAF User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Mon Aug 1 11:21:27 2016 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 163) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 111 067 006 - 29682096 3 Spin_Up_Time PO---- 095 092 000 - 0 4 Start_Stop_Count -O--CK 074 074 020 - 26963 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 46 7 Seek_Error_Rate POSR-- 082 035 030 - 177423523 9 Power_On_Hours -O--CK 072 072 000 - 24757 10 Spin_Retry_Count PO--C- 100 099 097 - 0 12 Power_Cycle_Count -O--CK 076 076 020 - 24854 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 058 033 045 Past 42 (Min/Max 41/44) 194 Temperature_Celsius -O---K 042 067 000 - 42 (0 21 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 062 051 000 - 30049906 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 187 000 - 147 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23552 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 589 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 589 [8] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:26.020 READ DMA EXT 00 00 00 00 01 00 00 00 00 00 00 00 00 00:01:26.013 NOP [Abort queued commands] 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:25.536 READ DMA EXT 00 00 00 00 01 00 00 00 00 00 00 00 00 00:01:25.529 NOP [Abort queued commands] 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:25.061 READ DMA EXT Error 588 [7] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 03 00 01 00 00 00 00 00 00 40 00 00:01:50.006 READ DMA EXT 25 00 03 00 01 00 00 00 00 00 00 40 00 00:01:49.939 READ DMA EXT 25 00 03 00 01 00 3a 60 00 38 2f 40 00 00:01:49.907 READ DMA EXT ef 00 03 00 45 00 ff ff 00 ff ff a0 00 00:01:49.892 SET FEATURES [Set transfer mode] 00 00 00 01 00 00 ff ff 00 ff ff 00 00 00:01:28.891 NOP [Abort queued commands] Error 587 [6] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 03 00 01 00 00 00 00 00 00 40 00 00:01:50.006 READ DMA EXT 25 00 03 00 01 00 3a 60 00 38 2f 40 00 00:01:49.939 READ DMA EXT ef 00 03 00 45 00 ff ff 00 ff ff a0 00 00:01:49.907 SET FEATURES [Set transfer mode] 00 00 00 01 00 00 ff ff 00 ff ff 00 00 00:01:49.892 NOP [Abort queued commands] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:28.891 IDENTIFY DEVICE Error 586 [5] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 03 00 01 00 3a 60 00 38 2f 40 00 00:01:50.006 READ DMA EXT ef 00 03 00 45 00 ff ff 00 ff ff a0 00 00:01:49.939 SET FEATURES [Set transfer mode] 00 00 00 01 00 00 ff ff 00 ff ff 00 00 00:01:49.907 NOP [Abort queued commands] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:49.892 IDENTIFY DEVICE f5 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:28.891 SECURITY FREEZE LOCK Error 585 [4] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:26.020 READ DMA EXT 00 00 00 00 01 00 00 00 00 00 00 00 00 00:01:26.013 NOP [Abort queued commands] 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:25.536 READ DMA EXT 00 00 00 00 01 00 00 00 00 00 00 00 00 00:01:25.529 NOP [Abort queued commands] 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:25.061 READ DMA EXT Error 584 [3] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 03 00 01 00 00 00 00 00 00 40 00 00:01:50.006 READ DMA EXT 25 00 03 00 01 00 00 00 00 00 00 40 00 00:01:49.939 READ DMA EXT 25 00 03 00 01 00 3a 60 00 38 2f 40 00 00:01:49.907 READ DMA EXT ef 00 03 00 45 00 ff ff 00 ff ff a0 00 00:01:49.892 SET FEATURES [Set transfer mode] 00 00 00 01 00 00 ff ff 00 ff ff 00 00 00:01:28.891 NOP [Abort queued commands] Error 583 [2] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 03 00 01 00 00 00 00 00 00 40 00 00:01:50.006 READ DMA EXT 25 00 03 00 01 00 3a 60 00 38 2f 40 00 00:01:49.939 READ DMA EXT ef 00 03 00 45 00 ff ff 00 ff ff a0 00 00:01:49.907 SET FEATURES [Set transfer mode] 00 00 00 01 00 00 ff ff 00 ff ff 00 00 00:01:49.892 NOP [Abort queued commands] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:28.891 IDENTIFY DEVICE Error 582 [1] occurred at disk power-on lifetime: 20790 hours (866 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 40 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 03 00 01 00 3a 60 00 38 2f 40 00 00:01:50.006 READ DMA EXT ef 00 03 00 45 00 ff ff 00 ff ff a0 00 00:01:49.939 SET FEATURES [Set transfer mode] 00 00 00 01 00 00 ff ff 00 ff ff 00 00 00:01:49.907 NOP [Abort queued commands] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:49.892 IDENTIFY DEVICE f5 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:28.891 SECURITY FREEZE LOCK SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20730 - # 2 Short offline Completed without error 00% 20728 - # 3 Short offline Completed without error 00% 20728 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Device Model: WDC WD1200JB-00EVA0 Serial Number: -- Firmware Version: 15.05R15 User Capacity: 120 034 123 776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is: Mon Aug 1 11:21:28 2016 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 3999) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 55) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 200 001 051 Past 0 3 Spin_Up_Time POS--- 149 143 021 - 3066 4 Start_Stop_Count -O--CK 090 090 040 - 10724 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate PO-R-- 200 200 051 - 0 9 Power_On_Hours -O--CK 060 060 000 - 29853 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count PO--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 091 091 000 - 9817 194 Temperature_Celsius -O---K 115 253 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable -O--C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 8463 200 Multi_Zone_Error_Rate P--R-- 200 155 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 1631 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1631 occurred at disk power-on lifetime: 530 hours (22 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 d2 3c 01 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 01 00 25 00 00 01 00 00 00:03:02.550 [RESERVED] 00 00 01 03 03 d1 3c 00 00:03:02.550 NOP [Abort queued commands] 01 00 25 00 00 01 00 00 00:03:02.550 [RESERVED] 01 00 25 00 00 01 00 00 00:03:02.550 [RESERVED] 00 00 01 03 03 ce 3c 00 00:03:02.550 NOP [Abort queued commands] Error 1630 occurred at disk power-on lifetime: 530 hours (22 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 d2 3c 01 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 01 00 25 00 00 01 00 00 00:03:00.650 [RESERVED] 01 00 25 00 00 01 00 00 00:03:00.650 [RESERVED] 00 00 01 03 03 ce 3c 00 00:03:00.650 NOP [Abort queued commands] 01 00 25 00 00 01 00 00 00:03:00.650 [RESERVED] 00 00 01 03 03 cb 3c 00 00:03:00.650 NOP [Abort queued commands] Error 1629 occurred at disk power-on lifetime: 530 hours (22 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 d2 3c 01 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 01 00 25 00 00 80 00 00 00:02:58.100 [RESERVED] 00 00 01 03 03 88 3b 00 00:02:58.100 NOP [Abort queued commands] 01 00 25 00 00 80 00 00 00:02:58.100 [RESERVED] 00 00 01 03 03 08 3a 00 00:02:58.100 NOP [Abort queued commands] 01 00 25 00 00 80 00 00 00:02:58.100 [RESERVED] Error 1628 occurred at disk power-on lifetime: 530 hours (22 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 d2 3c 01 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 01 00 25 00 00 08 00 00 00:02:28.900 [RESERVED] 00 00 01 03 03 d4 3c 00 00:02:28.900 NOP [Abort queued commands] 01 00 25 00 00 08 00 00 00:02:28.900 [RESERVED] 00 00 00 03 03 00 00 00 00:02:28.900 NOP [Abort queued commands] 01 00 25 00 00 01 00 00 00:02:28.900 [RESERVED] Error 1627 occurred at disk power-on lifetime: 530 hours (22 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 d2 3c 01 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 01 00 25 00 00 08 00 00 00:02:27.000 [RESERVED] 00 00 01 03 03 cc 3c 00 00:02:27.000 NOP [Abort queued commands] 01 00 25 00 00 08 00 00 00:02:27.000 [RESERVED] 01 00 25 00 00 01 00 00 00:02:27.000 [RESERVED] 00 00 00 03 03 00 00 00 00:02:27.000 NOP [Abort queued commands] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed: read failure 90% 530 81106 # 2 Conveyance offline Completed without error 00% 376 - # 3 Short offline Completed without error 00% 1091 - # 4 Conveyance offline Completed without error 00% 696 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdc === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-1CH162 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC49 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Aug 1 11:21:29 2016 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 111 099 006 - 30359448 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3099 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 067 060 030 - 6194353 9 Power_On_Hours -O--CK 096 096 000 - 4296 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 2019 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 1 1 3 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 062 051 045 - 38 (Min/Max 38/38) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1536 193 Load_Cycle_Count -O--CK 087 087 000 - 27336 194 Temperature_Celsius -O---K 038 049 000 - 38 (0 19 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 2499h+08m+46.452s 241 Total_LBAs_Written ------ 100 253 000 - 19496588602 242 Total_LBAs_Read ------ 100 253 000 - 51672328110 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 21 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 38/38 Celsius Lifetime Min/Max Temperature: 20/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS