/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Feb 10 20:41:30 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12840) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 214) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 3 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 092 025 - 2473 4 Start_Stop_Count -O--CK 079 079 000 - 22196 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 2621 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2784 191 G-Sense_Error_Rate -O---K 100 100 000 - 652 192 Power-Off_Retract_Count -O---K 100 100 000 - 81 194 Temperature_Celsius -O---- 064 051 000 - 24 (Min/Max 5/49) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 24138 223 Load_Retry_Count -O--CK 100 100 000 - 65 225 Load_Cycle_Count -O--CK 097 097 000 - 31182 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 19/24 Celsius Lifetime Min/Max Temperature: 7/49 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (76) Index Estimated Time Temperature Celsius 77 2023-02-10 10:05 24 ***** 78 2023-02-10 10:10 27 ******** ... ..( 16 skipped). .. ******** 95 2023-02-10 11:35 27 ******** 96 2023-02-10 11:40 26 ******* 97 2023-02-10 11:45 26 ******* 98 2023-02-10 11:50 26 ******* 99 2023-02-10 11:55 25 ****** ... ..( 4 skipped). .. ****** 104 2023-02-10 12:20 25 ****** 105 2023-02-10 12:25 26 ******* ... ..( 6 skipped). .. ******* 112 2023-02-10 13:00 26 ******* 113 2023-02-10 13:05 25 ****** 114 2023-02-10 13:10 25 ****** 115 2023-02-10 13:15 26 ******* 116 2023-02-10 13:20 27 ******** ... ..( 4 skipped). .. ******** 121 2023-02-10 13:45 27 ******** 122 2023-02-10 13:50 26 ******* 123 2023-02-10 13:55 26 ******* 124 2023-02-10 14:00 26 ******* 125 2023-02-10 14:05 25 ****** ... ..( 4 skipped). .. ****** 2 2023-02-10 14:30 25 ****** 3 2023-02-10 14:35 23 **** 4 2023-02-10 14:40 27 ******** 5 2023-02-10 14:45 29 ********** 6 2023-02-10 14:50 29 ********** 7 2023-02-10 14:55 27 ******** 8 2023-02-10 15:00 27 ******** 9 2023-02-10 15:05 28 ********* 10 2023-02-10 15:10 28 ********* 11 2023-02-10 15:15 29 ********** 12 2023-02-10 15:20 30 *********** 13 2023-02-10 15:25 29 ********** 14 2023-02-10 15:30 28 ********* 15 2023-02-10 15:35 27 ******** 16 2023-02-10 15:40 28 ********* 17 2023-02-10 15:45 30 *********** 18 2023-02-10 15:50 31 ************ 19 2023-02-10 15:55 31 ************ 20 2023-02-10 16:00 31 ************ 21 2023-02-10 16:05 28 ********* 22 2023-02-10 16:10 26 ******* 23 2023-02-10 16:15 25 ****** 24 2023-02-10 16:20 25 ****** 25 2023-02-10 16:25 25 ****** 26 2023-02-10 16:30 22 *** 27 2023-02-10 16:35 25 ****** 28 2023-02-10 16:40 27 ******** 29 2023-02-10 16:45 28 ********* 30 2023-02-10 16:50 29 ********** 31 2023-02-10 16:55 29 ********** 32 2023-02-10 17:00 29 ********** 33 2023-02-10 17:05 28 ********* 34 2023-02-10 17:10 27 ******** ... ..( 2 skipped). .. ******** 37 2023-02-10 17:25 27 ******** 38 2023-02-10 17:30 26 ******* 39 2023-02-10 17:35 27 ******** ... ..( 3 skipped). .. ******** 43 2023-02-10 17:55 27 ******** 44 2023-02-10 18:00 26 ******* 45 2023-02-10 18:05 27 ******** 46 2023-02-10 18:10 26 ******* 47 2023-02-10 18:15 27 ******** ... ..( 2 skipped). .. ******** 50 2023-02-10 18:30 27 ******** 51 2023-02-10 18:35 26 ******* 52 2023-02-10 18:40 25 ****** ... ..( 2 skipped). .. ****** 55 2023-02-10 18:55 25 ****** 56 2023-02-10 19:00 26 ******* 57 2023-02-10 19:05 25 ****** 58 2023-02-10 19:10 25 ****** 59 2023-02-10 19:15 25 ****** 60 2023-02-10 19:20 24 ***** ... ..( 12 skipped). .. ***** 73 2023-02-10 20:25 24 ***** 74 2023-02-10 20:30 25 ****** 75 2023-02-10 20:35 25 ****** 76 2023-02-10 20:40 23 **** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific