/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.17.12-gnu] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SanDisk SDSSDH3 1T00 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 415020RL User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jun 23 11:24:14 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 100 100 --- - 1046 12 Power_Cycle_Count -O--CK 100 100 --- - 20 165 Unknown_Attribute -O--CK 100 100 --- - 53936797 166 Unknown_Attribute -O--CK 100 100 --- - 1 167 Unknown_Attribute -O--CK 100 100 --- - 28 168 Unknown_Attribute -O--CK 100 100 --- - 30 169 Unknown_Attribute -O--CK 100 100 --- - 259 170 Unknown_Attribute -O--CK 100 100 --- - 0 171 Unknown_Attribute -O--CK 100 100 --- - 0 172 Unknown_Attribute -O--CK 100 100 --- - 0 173 Unknown_Attribute -O--CK 100 100 --- - 8 174 Unknown_Attribute -O--CK 100 100 --- - 11 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 --- - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 072 037 --- - 28 (Min/Max 20/37) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Unknown_SSD_Attribute -O--CK 001 001 --- - 1241250791713 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 Media_Wearout_Indicator -O--CK 100 100 --- - 9195 234 Unknown_Attribute -O--CK 100 100 --- - 9959 241 Total_LBAs_Written ----CK 253 253 --- - 6961 242 Total_LBAs_Read ----CK 253 253 --- - 2790 244 Unknown_Attribute -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 1957 Current Device Internal Status Data log 0x25 GPL R/O 1957 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 20 --- Lifetime Power-On Resets 0x01 0x010 4 1046 --- Power-on Hours 0x01 0x018 6 14598321484 --- Logical Sectors Written 0x01 0x020 6 116329925 --- Number of Write Commands 0x01 0x028 6 5852875631 --- Logical Sectors Read 0x01 0x030 6 38504049 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.17.12-gnu] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: External Disk 0 Serial Number: -- Firmware Version: RGL10364 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu Jun 23 11:24:14 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.17.12-gnu] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SanDisk SDSSDH3 1T00 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 415020RL User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jun 23 11:24:14 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 100 100 --- - 1047 12 Power_Cycle_Count -O--CK 100 100 --- - 19 165 Unknown_Attribute -O--CK 100 100 --- - 66257734 166 Unknown_Attribute -O--CK 100 100 --- - 1 167 Unknown_Attribute -O--CK 100 100 --- - 56 168 Unknown_Attribute -O--CK 100 100 --- - 33 169 Unknown_Attribute -O--CK 100 100 --- - 460 170 Unknown_Attribute -O--CK 100 100 --- - 0 171 Unknown_Attribute -O--CK 100 100 --- - 0 172 Unknown_Attribute -O--CK 100 100 --- - 0 173 Unknown_Attribute -O--CK 100 100 --- - 11 174 Unknown_Attribute -O--CK 100 100 --- - 12 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 --- - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 072 041 --- - 28 (Min/Max 22/41) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Unknown_SSD_Attribute -O--CK 001 001 --- - 1387291869507 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 Media_Wearout_Indicator -O--CK 100 100 --- - 11734 234 Unknown_Attribute -O--CK 100 100 --- - 12480 241 Total_LBAs_Written ----CK 253 253 --- - 7124 242 Total_LBAs_Read ----CK 253 253 --- - 3630 244 Unknown_Attribute -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 1957 Current Device Internal Status Data log 0x25 GPL R/O 1957 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 19 --- Lifetime Power-On Resets 0x01 0x010 4 1047 --- Power-on Hours 0x01 0x018 6 14941480411 --- Logical Sectors Written 0x01 0x020 6 113052378 --- Number of Write Commands 0x01 0x028 6 7614642486 --- Logical Sectors Read 0x01 0x030 6 21549249 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET /dev/sdd smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.17.12-gnu] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 870 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT01B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jun 23 11:24:14 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 4 9 Power_On_Hours -O--CK 098 098 000 - 8104 12 Power_Cycle_Count -O--CK 099 099 000 - 35 177 Wear_Leveling_Count PO--C- 098 098 000 - 25 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 4 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 099 099 010 - 4 187 Reported_Uncorrect -O--CK 099 099 000 - 92 190 Airflow_Temperature_Cel -O--CK 071 053 000 - 29 195 Hardware_ECC_Recovered -O-RC- 199 199 000 - 92 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 27 241 Total_LBAs_Written -O--CK 099 099 000 - 28993173270 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 92 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 92 [3] occurred at disk power-on lifetime: 7070 hours (294 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 1f 33 b6 40 40 00 Error: UNC at LBA = 0x1f33b640 = 523482688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 80 00 00 1f 33 b6 40 40 10 01:13:44.733 READ FPDMA QUEUED 60 00 08 00 78 00 00 3b 0d 3b c8 40 0f 01:13:44.733 READ FPDMA QUEUED 60 05 00 00 70 00 00 3b 0d 87 80 40 0e 01:13:44.733 READ FPDMA QUEUED 60 05 00 00 68 00 00 3b 0d 8c 80 40 0d 01:13:44.733 READ FPDMA QUEUED 60 06 00 00 60 00 00 3b 0d 91 80 40 0c 01:13:44.733 READ FPDMA QUEUED Error 91 [2] occurred at disk power-on lifetime: 7070 hours (294 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 3b 0d 3b c8 40 00 Error: UNC at LBA = 0x3b0d3bc8 = 990723016 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 3b 0d 3b c8 40 00 01:13:44.526 READ FPDMA QUEUED 60 02 00 00 d8 00 00 3b 0d ab 80 40 1b 01:13:44.526 READ FPDMA QUEUED 60 00 08 00 d0 00 00 3b 0d 6c 80 40 1a 01:13:44.526 READ FPDMA QUEUED 60 00 08 00 c8 00 00 3b 0d 6a 88 40 19 01:13:44.526 READ FPDMA QUEUED 60 00 08 00 c0 00 00 3b 0d 6b 90 40 18 01:13:44.526 READ FPDMA QUEUED Error 90 [1] occurred at disk power-on lifetime: 7070 hours (294 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 58 00 00 3b 0d 42 b8 40 00 Error: UNC at LBA = 0x3b0d42b8 = 990724792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 58 00 00 3b 0d 42 b8 40 0b 01:13:44.327 READ FPDMA QUEUED 60 01 00 00 50 00 00 3b 0d 41 b8 40 0a 01:13:44.327 READ FPDMA QUEUED 60 01 00 00 48 00 00 3b 0d 3f b8 40 09 01:13:44.327 READ FPDMA QUEUED 60 01 00 00 40 00 00 3b 0d 40 b8 40 08 01:13:44.327 READ FPDMA QUEUED 60 01 00 00 38 00 00 3b 0d 3e b8 40 07 01:13:44.327 READ FPDMA QUEUED Error 89 [0] occurred at disk power-on lifetime: 7070 hours (294 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 78 00 00 3b 0d 76 80 40 00 Error: UNC at LBA = 0x3b0d7680 = 990738048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 06 00 00 78 00 00 3b 0d 76 80 40 0f 01:13:44.101 READ FPDMA QUEUED 60 06 00 00 70 00 00 3b 0d 70 80 40 0e 01:13:44.101 READ FPDMA QUEUED 60 01 00 00 68 00 00 3b 0d 3b b8 40 0d 01:13:44.101 READ FPDMA QUEUED 60 01 00 00 58 00 00 3b 0d 3c b8 40 0b 01:13:44.101 READ FPDMA QUEUED 60 01 00 00 30 00 00 3b 0d 3d b8 40 06 01:13:44.101 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 7083 - # 2 Extended offline Completed without error 00% 7071 - # 3 Short offline Completed without error 00% 413 - # 4 Short offline Completed without error 00% 412 - # 5 Short offline Completed without error 00% 19 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 23/37 Celsius Lifetime Min/Max Temperature: 21/47 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (37) Index Estimated Time Temperature Celsius 38 2022-06-22 14:10 31 ************ 39 2022-06-22 14:20 30 *********** 40 2022-06-22 14:30 30 *********** 41 2022-06-22 14:40 31 ************ 42 2022-06-22 14:50 30 *********** 43 2022-06-22 15:00 30 *********** 44 2022-06-22 15:10 31 ************ 45 2022-06-22 15:20 29 ********** 46 2022-06-22 15:30 30 *********** 47 2022-06-22 15:40 30 *********** 48 2022-06-22 15:50 29 ********** 49 2022-06-22 16:00 29 ********** 50 2022-06-22 16:10 30 *********** 51 2022-06-22 16:20 29 ********** ... ..( 2 skipped). .. ********** 54 2022-06-22 16:50 29 ********** 55 2022-06-22 17:00 31 ************ 56 2022-06-22 17:10 29 ********** 57 2022-06-22 17:20 30 *********** 58 2022-06-22 17:30 30 *********** 59 2022-06-22 17:40 28 ********* 60 2022-06-22 17:50 29 ********** 61 2022-06-22 18:00 29 ********** 62 2022-06-22 18:10 29 ********** 63 2022-06-22 18:20 28 ********* 64 2022-06-22 18:30 28 ********* 65 2022-06-22 18:40 29 ********** 66 2022-06-22 18:50 29 ********** 67 2022-06-22 19:00 29 ********** 68 2022-06-22 19:10 30 *********** 69 2022-06-22 19:20 30 *********** 70 2022-06-22 19:30 29 ********** 71 2022-06-22 19:40 30 *********** 72 2022-06-22 19:50 30 *********** 73 2022-06-22 20:00 29 ********** 74 2022-06-22 20:10 28 ********* 75 2022-06-22 20:20 27 ******** 76 2022-06-22 20:30 28 ********* 77 2022-06-22 20:40 27 ******** ... ..( 6 skipped). .. ******** 84 2022-06-22 21:50 27 ******** 85 2022-06-22 22:00 28 ********* 86 2022-06-22 22:10 28 ********* 87 2022-06-22 22:20 29 ********** 88 2022-06-22 22:30 28 ********* ... ..( 5 skipped). .. ********* 94 2022-06-22 23:30 28 ********* 95 2022-06-22 23:40 29 ********** 96 2022-06-22 23:50 29 ********** 97 2022-06-23 00:00 29 ********** 98 2022-06-23 00:10 31 ************ 99 2022-06-23 00:20 30 *********** 100 2022-06-23 00:30 29 ********** 101 2022-06-23 00:40 29 ********** 102 2022-06-23 00:50 30 *********** 103 2022-06-23 01:00 29 ********** 104 2022-06-23 01:10 29 ********** 105 2022-06-23 01:20 30 *********** 106 2022-06-23 01:30 28 ********* 107 2022-06-23 01:40 29 ********** ... ..( 7 skipped). .. ********** 115 2022-06-23 03:00 29 ********** 116 2022-06-23 03:10 30 *********** 117 2022-06-23 03:20 29 ********** ... ..( 11 skipped). .. ********** 1 2022-06-23 05:20 29 ********** 2 2022-06-23 05:30 28 ********* 3 2022-06-23 05:40 29 ********** ... ..( 7 skipped). .. ********** 11 2022-06-23 07:00 29 ********** 12 2022-06-23 07:10 30 *********** 13 2022-06-23 07:20 29 ********** ... ..( 16 skipped). .. ********** 30 2022-06-23 10:10 29 ********** 31 2022-06-23 10:20 30 *********** 32 2022-06-23 10:30 30 *********** 33 2022-06-23 10:40 30 *********** 34 2022-06-23 10:50 29 ********** 35 2022-06-23 11:00 28 ********* 36 2022-06-23 11:10 33 ************** 37 2022-06-23 11:20 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 35 --- Lifetime Power-On Resets 0x01 0x010 4 8104 --- Power-on Hours 0x01 0x018 6 28993173270 --- Logical Sectors Written 0x01 0x020 6 475938664 --- Number of Write Commands 0x01 0x028 6 14346853183 --- Logical Sectors Read 0x01 0x030 6 160715240 --- Number of Read Commands 0x01 0x038 6 3324000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 92 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 321 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sde smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.17.12-gnu] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WD Blue / Red / Green SSDs Device Model: WDC WDS100T2B0A-00SM50 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 415020WD User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Thu Jun 23 11:24:14 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 100 100 --- - 376 12 Power_Cycle_Count -O--CK 100 100 --- - 11 165 Block_Erase_Count -O--CK 100 100 --- - 24903987 166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 1 167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 132 168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 7 169 Total_Bad_Blocks -O--CK 100 100 --- - 634 170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 171 Program_Fail_Count -O--CK 100 100 --- - 0 172 Erase_Fail_Count -O--CK 100 100 --- - 0 173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 3 174 Unexpected_Power_Loss -O--CK 100 100 --- - 5 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 --- - 0 188 Command_Timeout -O--CK 100 100 --- - 8 194 Temperature_Celsius -O---K 072 036 --- - 28 (Min/Max 24/36) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Media_Wearout_Indicator -O--CK 001 001 --- - 0x003d001e003d 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 NAND_GB_Written_TLC -O--CK 100 100 --- - 4113 234 NAND_GB_Written_SLC -O--CK 100 100 --- - 4575 241 Host_Writes_GiB ----CK 253 253 --- - 4369 242 Host_Reads_GiB ----CK 253 253 --- - 1170 244 Temp_Throttle_Status -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 1957 Current Device Internal Status Data log 0x25 GPL R/O 1957 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 376 --- Power-on Hours 0x01 0x018 6 9163331568 --- Logical Sectors Written 0x01 0x020 6 101202650 --- Number of Write Commands 0x01 0x028 6 2454849574 --- Logical Sectors Read 0x01 0x030 6 27300839 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 21 Device-to-host register FISes sent due to a COMRESET /dev/sdf smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.17.12-gnu] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB, AF) Device Model: WDC WD10SMZW-11Y0TS0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,171,331,584 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 23 11:24:14 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8400) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 134) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 170 165 021 - 2500 4 Start_Stop_Count -O--CK 099 099 000 - 1216 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3581 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 25 192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 193 Load_Cycle_Count -O--CK 200 200 000 - 2689 194 Temperature_Celsius -O---K 112 097 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xcf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 25/40 Celsius Lifetime Min/Max Temperature: 18/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (10) Index Estimated Time Temperature Celsius 11 2022-06-23 09:17 29 ********** ... ..( 68 skipped). .. ********** 80 2022-06-23 10:26 29 ********** 81 2022-06-23 10:27 ? - 82 2022-06-23 10:28 29 ********** 83 2022-06-23 10:29 29 ********** 84 2022-06-23 10:30 29 ********** 85 2022-06-23 10:31 30 *********** ... ..( 4 skipped). .. *********** 90 2022-06-23 10:36 30 *********** 91 2022-06-23 10:37 31 ************ ... ..( 46 skipped). .. ************ 10 2022-06-23 11:24 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 188 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 189 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1281415 Vendor specific