/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-94.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-08WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 28 12:51:41 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 115) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 177 172 021 - 2133 4 Start_Stop_Count -O--CK 100 100 000 - 141 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 271 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 141 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 138 194 Temperature_Celsius -O---K 112 099 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 253 - # 2 Short offline Completed without error 00% 187 - # 3 Short offline Completed without error 00% 138 - # 4 Short offline Completed without error 00% 30 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 25/31 Celsius Lifetime Min/Max Temperature: 24/44 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (171) Index Estimated Time Temperature Celsius 172 2020-09-28 04:54 30 *********** ... ..( 21 skipped). .. *********** 194 2020-09-28 05:16 30 *********** 195 2020-09-28 05:17 31 ************ ... ..( 2 skipped). .. ************ 198 2020-09-28 05:20 31 ************ 199 2020-09-28 05:21 30 *********** ... ..( 27 skipped). .. *********** 227 2020-09-28 05:49 30 *********** 228 2020-09-28 05:50 29 ********** ... ..( 6 skipped). .. ********** 235 2020-09-28 05:57 29 ********** 236 2020-09-28 05:58 30 *********** ... ..( 4 skipped). .. *********** 241 2020-09-28 06:03 30 *********** 242 2020-09-28 06:04 31 ************ 243 2020-09-28 06:05 30 *********** ... ..( 45 skipped). .. *********** 289 2020-09-28 06:51 30 *********** 290 2020-09-28 06:52 31 ************ ... ..(145 skipped). .. ************ 436 2020-09-28 09:18 31 ************ 437 2020-09-28 09:19 ? - 438 2020-09-28 09:20 25 ****** 439 2020-09-28 09:21 25 ****** 440 2020-09-28 09:22 26 ******* 441 2020-09-28 09:23 26 ******* 442 2020-09-28 09:24 27 ******** 443 2020-09-28 09:25 27 ******** 444 2020-09-28 09:26 27 ******** 445 2020-09-28 09:27 28 ********* 446 2020-09-28 09:28 28 ********* 447 2020-09-28 09:29 28 ********* 448 2020-09-28 09:30 29 ********** ... ..( 4 skipped). .. ********** 453 2020-09-28 09:35 29 ********** 454 2020-09-28 09:36 30 *********** ... ..( 25 skipped). .. *********** 2 2020-09-28 10:02 30 *********** 3 2020-09-28 10:03 31 ************ ... ..( 13 skipped). .. ************ 17 2020-09-28 10:17 31 ************ 18 2020-09-28 10:18 ? - 19 2020-09-28 10:19 25 ****** 20 2020-09-28 10:20 25 ****** 21 2020-09-28 10:21 26 ******* 22 2020-09-28 10:22 26 ******* 23 2020-09-28 10:23 27 ******** 24 2020-09-28 10:24 27 ******** 25 2020-09-28 10:25 27 ******** 26 2020-09-28 10:26 28 ********* ... ..( 2 skipped). .. ********* 29 2020-09-28 10:29 28 ********* 30 2020-09-28 10:30 29 ********** ... ..( 9 skipped). .. ********** 40 2020-09-28 10:40 29 ********** 41 2020-09-28 10:41 30 *********** ... ..( 89 skipped). .. *********** 131 2020-09-28 12:11 30 *********** 132 2020-09-28 12:12 ? - 133 2020-09-28 12:13 25 ****** 134 2020-09-28 12:14 25 ****** 135 2020-09-28 12:15 26 ******* 136 2020-09-28 12:16 26 ******* 137 2020-09-28 12:17 27 ******** 138 2020-09-28 12:18 28 ********* 139 2020-09-28 12:19 28 ********* 140 2020-09-28 12:20 28 ********* 141 2020-09-28 12:21 29 ********** ... ..( 2 skipped). .. ********** 144 2020-09-28 12:24 29 ********** 145 2020-09-28 12:25 30 *********** ... ..( 5 skipped). .. *********** 151 2020-09-28 12:31 30 *********** 152 2020-09-28 12:32 31 ************ ... ..( 18 skipped). .. ************ 171 2020-09-28 12:51 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 2472 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-94.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue (SATA) Device Model: WDC WD2500AAKS-00VSA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01B01 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Mon Sep 28 12:51:41 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 61) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 23 3 Spin_Up_Time PO---- 180 178 021 - 1983 4 Start_Stop_Count -O--CK 100 100 000 - 58 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 200 200 000 - 0 9 Power_On_Hours -O--CK 056 056 000 - 32810 10 Spin_Retry_Count -O--C- 100 253 000 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 088 088 000 - 12411 192 Power-Off_Retract_Count -O--CK 199 199 000 - 972 193 Load_Cycle_Count -O--CK 196 196 000 - 12411 194 Temperature_Celsius -O---K 110 089 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 52 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 52 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 77 42 23 0f 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 e3 23 77 15 0f 25 00 00 00 00:00:30.209 NOP [Abort queued commands] 14 77 25 23 0f 00 01 00 75 00 00 00 00 00:38:17.719 RECALIBRATE [RET-4] 00 02 00 00 75 23 be 14 01 42 00 00 00 00:00:00.001 NOP [Abort queued commands] Error 51 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 02 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 be 42 23 01 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 00 23 be 00 01 25 00 00 00 00:00:29.954 NOP [Abort queued commands] 14 be 25 23 01 00 02 00 73 00 00 00 00 00:38:14.206 RECALIBRATE [RET-4] 00 04 00 00 73 22 2f 14 f6 42 00 00 00 00:00:00.001 NOP [Abort queued commands] Error 50 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 04 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 2f 42 22 f6 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 e3 22 2f 15 f6 25 00 00 00 00:00:29.444 NOP [Abort queued commands] 14 2f 25 22 f6 00 04 00 6f 00 00 00 00 00:38:11.247 RECALIBRATE [RET-4] 00 08 00 00 77 22 22 14 f6 42 00 00 00 00:00:00.001 NOP [Abort queued commands] Error 49 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 9a 42 22 ea 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 00 22 9a 00 ea 25 00 00 00 00:00:28.424 NOP [Abort queued commands] 14 54 42 22 de 00 10 00 6f 00 00 00 14 00:38:05.140 RECALIBRATE [RET-4] 00 01 00 00 e3 22 54 15 de 25 00 00 00 00:00:24.336 NOP [Abort queued commands] Error 48 [23] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 10 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 54 42 22 de 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 10 00 00 5f 22 54 14 de 42 00 00 00 00:00:28.432 NOP [Abort queued commands] 15 c6 42 22 d2 00 01 00 e3 00 00 00 14 00:38:05.140 RECALIBRATE [RET-4] 00 01 00 00 00 22 c6 00 d2 25 00 00 00 00:00:24.352 NOP [Abort queued commands] Error 47 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 20 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 c6 42 22 d2 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 00 22 c6 00 d2 25 00 00 00 00:00:24.352 NOP [Abort queued commands] 14 c5 25 22 d2 00 20 00 3f 00 00 00 00 00:38:02.182 RECALIBRATE [RET-4] 00 40 00 00 7f 22 b8 14 d2 42 00 00 00 00:00:00.001 NOP [Abort queued commands] Error 46 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 40 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 28 42 22 c7 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 bf 22 28 14 c7 42 00 00 00 00:00:16.192 NOP [Abort queued commands] 15 2a 42 22 ba 00 01 00 e3 00 00 00 14 00:37:59.208 RECALIBRATE [RET-4] 00 01 00 00 00 22 2a 00 ba 25 00 00 00 00:00:16.256 NOP [Abort queued commands] Error 45 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 80 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 2a 42 22 ba 00 00 00 00 00 00 00 14 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 00 22 2a 00 ba 25 00 00 00 00:00:16.256 NOP [Abort queued commands] 14 23 25 22 ba 00 00 00 3f 00 00 00 00 00:37:55.875 RECALIBRATE [RET-4] 00 00 00 00 3f 22 97 14 ae 42 00 00 00 00:00:00.001 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 32699 - # 2 Short offline Completed without error 00% 32695 - # 3 Short offline Completed without error 00% 32689 - # 4 Short offline Interrupted (host reset) 90% 17565 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 26/33 Celsius Lifetime Min/Max Temperature: 32/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/85 Celsius Temperature History Size (Index): 128 (63) Index Estimated Time Temperature Celsius 64 2020-09-28 10:44 33 ************** ... ..( 86 skipped). .. ************** 23 2020-09-28 12:11 33 ************** 24 2020-09-28 12:12 ? - 25 2020-09-28 12:13 26 ******* 26 2020-09-28 12:14 26 ******* 27 2020-09-28 12:15 26 ******* 28 2020-09-28 12:16 27 ******** 29 2020-09-28 12:17 29 ********** 30 2020-09-28 12:18 29 ********** 31 2020-09-28 12:19 29 ********** 32 2020-09-28 12:20 30 *********** ... ..( 3 skipped). .. *********** 36 2020-09-28 12:24 30 *********** 37 2020-09-28 12:25 31 ************ 38 2020-09-28 12:26 32 ************* ... ..( 3 skipped). .. ************* 42 2020-09-28 12:30 32 ************* 43 2020-09-28 12:31 33 ************** ... ..( 19 skipped). .. ************** 63 2020-09-28 12:51 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 2477 Vendor specific