Probe #77449d40d6 of Gigabyte P55-USB3 Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3500418AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC46 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Sep 29 02:04:23 2018 +07 ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 93743087 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 095 095 020 - 5541 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 081 060 030 - 155360169 9 Power_On_Hours -O--CK 077 077 000 - 20974 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 098 098 020 - 2495 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 094 000 - 4295036418 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 062 050 045 - 38 (Min/Max 25/38) 194 Temperature_Celsius -O---K 038 050 000 - 38 (0 17 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 042 015 000 - 93743087 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 240 Head_Flying_Hours ------ 100 253 000 - 27901 (53 124 0) 241 Total_LBAs_Written ------ 100 253 000 - 4058335850 242 Total_LBAs_Read ------ 100 253 000 - 2999338989 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20287 - # 2 Extended offline Interrupted (host reset) 00% 18659 - # 3 Short offline Interrupted (host reset) 10% 12730 - # 4 Short offline Completed without error 00% 12104 - # 5 Short offline Completed without error 00% 11890 - # 6 Extended offline Interrupted (host reset) 80% 11800 - # 7 Short offline Completed without error 00% 11462 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 25/38 Celsius Lifetime Min/Max Temperature: 17/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (68) Index Estimated Time Temperature Celsius 69 2018-09-23 20:19 36 ***************** ... ..( 7 skipped). .. ***************** 77 2018-09-24 04:11 36 ***************** 78 2018-09-24 05:10 37 ****************** 79 2018-09-24 06:09 37 ****************** 80 2018-09-24 07:08 36 ***************** ... ..( 5 skipped). .. ***************** 86 2018-09-24 13:02 36 ***************** 87 2018-09-24 14:01 38 ******************* 88 2018-09-24 15:00 38 ******************* 89 2018-09-24 15:59 37 ****************** ... ..( 6 skipped). .. ****************** 96 2018-09-24 22:52 37 ****************** 97 2018-09-24 23:51 38 ******************* 98 2018-09-25 00:50 38 ******************* 99 2018-09-25 01:49 37 ****************** 100 2018-09-25 02:48 37 ****************** 101 2018-09-25 03:47 37 ****************** 102 2018-09-25 04:46 ? - 103 2018-09-25 05:45 24 ***** 104 2018-09-25 06:44 24 ***** 105 2018-09-25 07:43 37 ****************** ... ..( 2 skipped). .. ****************** 108 2018-09-25 10:40 37 ****************** 109 2018-09-25 11:39 38 ******************* ... ..( 2 skipped). .. ******************* 112 2018-09-25 14:36 38 ******************* 113 2018-09-25 15:35 ? - 114 2018-09-25 16:34 28 ********* 115 2018-09-25 17:33 28 ********* 116 2018-09-25 18:32 36 ***************** 117 2018-09-25 19:31 37 ****************** 118 2018-09-25 20:30 37 ****************** 119 2018-09-25 21:29 38 ******************* 120 2018-09-25 22:28 37 ****************** 121 2018-09-25 23:27 37 ****************** 122 2018-09-26 00:26 ? - 123 2018-09-26 01:25 24 ***** 124 2018-09-26 02:24 24 ***** 125 2018-09-26 03:23 37 ****************** ... ..( 2 skipped). .. ****************** 0 2018-09-26 06:20 37 ****************** 1 2018-09-26 07:19 ? - 2 2018-09-26 08:18 25 ****** 3 2018-09-26 09:17 25 ****** 4 2018-09-26 10:16 37 ****************** ... ..( 3 skipped). .. ****************** 8 2018-09-26 14:12 37 ****************** 9 2018-09-26 15:11 38 ******************* 10 2018-09-26 16:10 ? - 11 2018-09-26 17:09 25 ****** 12 2018-09-26 18:08 25 ****** 13 2018-09-26 19:07 37 ****************** ... ..( 6 skipped). .. ****************** 20 2018-09-27 02:00 37 ****************** 21 2018-09-27 02:59 38 ******************* 22 2018-09-27 03:58 37 ****************** ... ..( 3 skipped). .. ****************** 26 2018-09-27 07:54 37 ****************** 27 2018-09-27 08:53 ? - 28 2018-09-27 09:52 25 ****** 29 2018-09-27 10:51 25 ****** 30 2018-09-27 11:50 37 ****************** 31 2018-09-27 12:49 38 ******************* 32 2018-09-27 13:48 38 ******************* 33 2018-09-27 14:47 38 ******************* 34 2018-09-27 15:46 37 ****************** 35 2018-09-27 16:45 37 ****************** 36 2018-09-27 17:44 37 ****************** 37 2018-09-27 18:43 38 ******************* 38 2018-09-27 19:42 38 ******************* 39 2018-09-27 20:41 37 ****************** 40 2018-09-27 21:40 37 ****************** 41 2018-09-27 22:39 38 ******************* 42 2018-09-27 23:38 37 ****************** 43 2018-09-28 00:37 37 ****************** 44 2018-09-28 01:36 37 ****************** 45 2018-09-28 02:35 34 *************** 46 2018-09-28 03:34 37 ****************** 47 2018-09-28 04:33 38 ******************* 48 2018-09-28 05:32 37 ****************** ... ..( 4 skipped). .. ****************** 53 2018-09-28 10:27 37 ****************** 54 2018-09-28 11:26 38 ******************* 55 2018-09-28 12:25 38 ******************* 56 2018-09-28 13:24 37 ****************** 57 2018-09-28 14:23 38 ******************* 58 2018-09-28 15:22 38 ******************* 59 2018-09-28 16:21 38 ******************* 60 2018-09-28 17:20 37 ****************** 61 2018-09-28 18:19 37 ****************** 62 2018-09-28 19:18 38 ******************* ... ..( 5 skipped). .. ******************* 68 2018-09-29 01:12 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 43 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD753LJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AA01118 User Capacity: 750,156,374,016 bytes [750 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Sat Sep 29 02:04:24 2018 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 18) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 9577) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 160) minutes. Conveyance self-test routine recommended polling time: ( 17) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 082 082 011 - 6370 4 Start_Stop_Count -O--CK 097 097 000 - 3071 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 10242 9 Power_On_Hours -O--CK 096 096 000 - 22695 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 2655 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 1 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 065 060 000 - 35 (Min/Max 21/36) 194 Temperature_Celsius -O---K 064 059 000 - 36 (Min/Max 21/37) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 31993 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 2 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 20% 21985 - # 2 Extended offline Completed without error 50% 20354 - # 3 Short offline Interrupted (host reset) 20% 14987 - # 4 Short offline Completed without error 00% 14359 - # 5 Short offline Completed without error 00% 14146 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Max Temperature: 37 Celsius Lifetime Max Temperature: 42 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (70) Index Estimated Time Temperature Celsius 71 2018-09-28 23:57 36 ***************** 72 2018-09-28 23:58 35 **************** ... ..( 2 skipped). .. **************** 75 2018-09-29 00:01 35 **************** 76 2018-09-29 00:02 36 ***************** 77 2018-09-29 00:03 35 **************** 78 2018-09-29 00:04 36 ***************** 79 2018-09-29 00:05 35 **************** 80 2018-09-29 00:06 36 ***************** ... ..( 3 skipped). .. ***************** 84 2018-09-29 00:10 36 ***************** 85 2018-09-29 00:11 35 **************** 86 2018-09-29 00:12 36 ***************** 87 2018-09-29 00:13 35 **************** 88 2018-09-29 00:14 36 ***************** 89 2018-09-29 00:15 36 ***************** 90 2018-09-29 00:16 35 **************** 91 2018-09-29 00:17 35 **************** 92 2018-09-29 00:18 36 ***************** 93 2018-09-29 00:19 35 **************** ... ..( 13 skipped). .. **************** 107 2018-09-29 00:33 35 **************** 108 2018-09-29 00:34 36 ***************** 109 2018-09-29 00:35 35 **************** ... ..( 27 skipped). .. **************** 9 2018-09-29 01:03 35 **************** 10 2018-09-29 01:04 36 ***************** 11 2018-09-29 01:05 35 **************** 12 2018-09-29 01:06 35 **************** 13 2018-09-29 01:07 36 ***************** 14 2018-09-29 01:08 36 ***************** 15 2018-09-29 01:09 35 **************** ... ..( 5 skipped). .. **************** 21 2018-09-29 01:15 35 **************** 22 2018-09-29 01:16 36 ***************** ... ..( 4 skipped). .. ***************** 27 2018-09-29 01:21 36 ***************** 28 2018-09-29 01:22 35 **************** 29 2018-09-29 01:23 35 **************** 30 2018-09-29 01:24 36 ***************** ... ..( 7 skipped). .. ***************** 38 2018-09-29 01:32 36 ***************** 39 2018-09-29 01:33 35 **************** 40 2018-09-29 01:34 36 ***************** 41 2018-09-29 01:35 35 **************** ... ..( 4 skipped). .. **************** 46 2018-09-29 01:40 35 **************** 47 2018-09-29 01:41 36 ***************** 48 2018-09-29 01:42 35 **************** 49 2018-09-29 01:43 35 **************** 50 2018-09-29 01:44 36 ***************** 51 2018-09-29 01:45 35 **************** ... ..( 2 skipped). .. **************** 54 2018-09-29 01:48 35 **************** 55 2018-09-29 01:49 36 ***************** ... ..( 14 skipped). .. ***************** 70 2018-09-29 02:04 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 42 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 42 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD6400AARS-00Y5B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Sep 29 02:04:24 2018 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12360) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 145) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 669 3 Spin_Up_Time POS--K 128 123 021 - 6575 4 Start_Stop_Count -O--CK 098 098 000 - 2775 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 069 069 000 - 22905 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2644 192 Power-Off_Retract_Count -O--CK 200 200 000 - 576 193 Load_Cycle_Count -O--CK 073 073 000 - 383213 194 Temperature_Celsius -O---K 108 100 000 - 39 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 669 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 669 [20] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: WP at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 70 00 00 06 ff 26 1d 40 00 07:13:16.901 WRITE FPDMA QUEUED 61 01 00 00 60 00 00 02 16 19 e0 40 00 07:13:16.901 WRITE FPDMA QUEUED 61 01 00 00 50 00 00 02 16 18 e0 40 00 07:13:16.901 WRITE FPDMA QUEUED 61 01 00 00 48 00 00 02 16 17 e0 40 00 07:13:16.901 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 02 16 16 e0 40 00 07:13:16.901 WRITE FPDMA QUEUED Error 668 [19] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: UNC at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 48 00 00 25 8d b9 a0 40 00 07:13:14.030 READ FPDMA QUEUED 60 00 20 00 40 00 00 25 8d c4 e0 40 00 07:13:14.030 READ FPDMA QUEUED 61 01 00 00 38 00 00 02 16 11 e0 40 00 07:13:14.030 WRITE FPDMA QUEUED 60 00 20 00 30 00 00 25 8f 28 80 40 00 07:13:14.030 READ FPDMA QUEUED 61 01 00 00 28 00 00 02 16 10 e0 40 00 07:13:14.030 WRITE FPDMA QUEUED Error 667 [18] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: UNC at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 60 00 00 02 16 0c e0 40 00 07:13:11.216 READ FPDMA QUEUED 60 01 00 00 58 00 00 02 16 0b e0 40 00 07:13:11.216 READ FPDMA QUEUED 60 01 00 00 50 00 00 02 16 0a e0 40 00 07:13:11.216 READ FPDMA QUEUED 61 00 08 00 40 00 00 06 ff 25 ad 40 00 07:13:11.216 WRITE FPDMA QUEUED 61 00 18 00 38 00 00 00 5f c4 d0 40 00 07:13:11.216 WRITE FPDMA QUEUED Error 666 [17] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: WP at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 a8 00 00 06 ff 25 75 40 00 07:13:08.323 WRITE FPDMA QUEUED 61 00 08 00 a0 00 00 00 5e 92 f8 40 00 07:13:08.323 WRITE FPDMA QUEUED 61 00 04 00 98 00 00 00 23 d0 a0 40 00 07:13:08.323 WRITE FPDMA QUEUED 61 00 08 00 90 00 00 06 ff 25 6d 40 00 07:13:08.323 WRITE FPDMA QUEUED 61 00 10 00 88 00 00 00 5f c4 88 40 00 07:13:08.322 WRITE FPDMA QUEUED Error 665 [16] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: WP at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 a0 00 00 0d 48 4a 80 40 00 07:13:05.459 WRITE FPDMA QUEUED 61 01 00 00 90 00 00 0d 48 49 80 40 00 07:13:05.458 WRITE FPDMA QUEUED 61 01 00 00 88 00 00 0d 48 48 80 40 00 07:13:05.457 WRITE FPDMA QUEUED 61 01 00 00 80 00 00 0d 48 47 80 40 00 07:13:05.457 WRITE FPDMA QUEUED 61 01 00 00 70 00 00 0d 48 46 80 40 00 07:13:05.457 WRITE FPDMA QUEUED Error 664 [15] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: WP at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 e8 00 00 0d 48 37 80 40 00 07:13:02.397 WRITE FPDMA QUEUED 61 01 00 00 e0 00 00 0d 48 36 80 40 00 07:13:02.397 WRITE FPDMA QUEUED 61 00 10 00 d8 00 00 06 ff 24 e5 40 00 07:13:02.397 WRITE FPDMA QUEUED 61 00 78 00 d0 00 00 00 64 e7 78 40 00 07:13:02.395 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 06 ff 24 dd 40 00 07:13:02.395 WRITE FPDMA QUEUED Error 663 [14] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: WP at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 68 00 00 00 62 b0 c0 40 00 07:12:59.433 WRITE FPDMA QUEUED 61 00 08 00 60 00 00 00 64 e2 10 40 00 07:12:59.433 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 06 ff 24 55 40 00 07:12:59.433 WRITE FPDMA QUEUED 61 00 e9 00 50 00 00 11 32 2c 68 40 00 07:12:59.433 WRITE FPDMA QUEUED 61 00 08 00 48 00 00 26 81 b3 70 40 00 07:12:59.432 WRITE FPDMA QUEUED Error 662 [13] occurred at disk power-on lifetime: 7694 hours (320 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 80 c7 a0 40 00 Error: WP at LBA = 0x0180c7a0 = 25216928 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 50 00 00 01 80 cc 30 40 00 07:12:56.540 WRITE FPDMA QUEUED 61 00 cf 00 b0 00 00 26 64 f5 e8 40 00 07:12:56.539 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 26 64 f4 e8 40 00 07:12:56.539 WRITE FPDMA QUEUED 61 00 30 00 30 00 00 00 26 b1 58 40 00 07:12:56.539 WRITE FPDMA QUEUED 61 00 08 00 28 00 00 00 62 ae e0 40 00 07:12:56.539 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 70% 14700 - # 2 Short offline Completed without error 00% 14078 - # 3 Short offline Completed without error 00% 13867 - # 4 Short offline Completed without error 00% 13460 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 28/42 Celsius Lifetime Min/Max Temperature: 38/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (67) Index Estimated Time Temperature Celsius 68 2018-09-28 18:07 38 ******************* ... ..( 4 skipped). .. ******************* 73 2018-09-28 18:12 38 ******************* 74 2018-09-28 18:13 39 ******************** ... ..( 5 skipped). .. ******************** 80 2018-09-28 18:19 39 ******************** 81 2018-09-28 18:20 38 ******************* 82 2018-09-28 18:21 38 ******************* 83 2018-09-28 18:22 38 ******************* 84 2018-09-28 18:23 39 ******************** 85 2018-09-28 18:24 38 ******************* ... ..( 7 skipped). .. ******************* 93 2018-09-28 18:32 38 ******************* 94 2018-09-28 18:33 39 ******************** 95 2018-09-28 18:34 38 ******************* ... ..( 7 skipped). .. ******************* 103 2018-09-28 18:42 38 ******************* 104 2018-09-28 18:43 39 ******************** ... ..(100 skipped). .. ******************** 205 2018-09-28 20:24 39 ******************** 206 2018-09-28 20:25 38 ******************* ... ..( 7 skipped). .. ******************* 214 2018-09-28 20:33 38 ******************* 215 2018-09-28 20:34 39 ******************** ... ..( 2 skipped). .. ******************** 218 2018-09-28 20:37 39 ******************** 219 2018-09-28 20:38 40 ********************* 220 2018-09-28 20:39 40 ********************* 221 2018-09-28 20:40 40 ********************* 222 2018-09-28 20:41 41 ********************** ... ..( 14 skipped). .. ********************** 237 2018-09-28 20:56 41 ********************** 238 2018-09-28 20:57 42 *********************** 239 2018-09-28 20:58 41 ********************** 240 2018-09-28 20:59 42 *********************** ... ..( 99 skipped). .. *********************** 340 2018-09-28 22:39 42 *********************** 341 2018-09-28 22:40 41 ********************** ... ..( 6 skipped). .. ********************** 348 2018-09-28 22:47 41 ********************** 349 2018-09-28 22:48 40 ********************* ... ..( 6 skipped). .. ********************* 356 2018-09-28 22:55 40 ********************* 357 2018-09-28 22:56 39 ******************** ... ..( 59 skipped). .. ******************** 417 2018-09-28 23:56 39 ******************** 418 2018-09-28 23:57 38 ******************* ... ..( 2 skipped). .. ******************* 421 2018-09-29 00:00 38 ******************* 422 2018-09-29 00:01 39 ******************** ... ..( 2 skipped). .. ******************** 425 2018-09-29 00:04 39 ******************** 426 2018-09-29 00:05 38 ******************* ... ..( 4 skipped). .. ******************* 431 2018-09-29 00:10 38 ******************* 432 2018-09-29 00:11 39 ******************** 433 2018-09-29 00:12 39 ******************** 434 2018-09-29 00:13 38 ******************* ... ..( 6 skipped). .. ******************* 441 2018-09-29 00:20 38 ******************* 442 2018-09-29 00:21 39 ******************** ... ..( 6 skipped). .. ******************** 449 2018-09-29 00:28 39 ******************** 450 2018-09-29 00:29 38 ******************* 451 2018-09-29 00:30 38 ******************* 452 2018-09-29 00:31 39 ******************** ... ..( 4 skipped). .. ******************** 457 2018-09-29 00:36 39 ******************** 458 2018-09-29 00:37 38 ******************* ... ..( 2 skipped). .. ******************* 461 2018-09-29 00:40 38 ******************* 462 2018-09-29 00:41 39 ******************** ... ..( 17 skipped). .. ******************** 2 2018-09-29 00:59 39 ******************** 3 2018-09-29 01:00 38 ******************* 4 2018-09-29 01:01 39 ******************** ... ..( 6 skipped). .. ******************** 11 2018-09-29 01:08 39 ******************** 12 2018-09-29 01:09 38 ******************* 13 2018-09-29 01:10 38 ******************* 14 2018-09-29 01:11 39 ******************** ... ..( 3 skipped). .. ******************** 18 2018-09-29 01:15 39 ******************** 19 2018-09-29 01:16 38 ******************* ... ..( 3 skipped). .. ******************* 23 2018-09-29 01:20 38 ******************* 24 2018-09-29 01:21 39 ******************** 25 2018-09-29 01:22 39 ******************** 26 2018-09-29 01:23 39 ******************** 27 2018-09-29 01:24 38 ******************* ... ..( 5 skipped). .. ******************* 33 2018-09-29 01:30 38 ******************* 34 2018-09-29 01:31 39 ******************** ... ..( 29 skipped). .. ******************** 64 2018-09-29 02:01 39 ******************** 65 2018-09-29 02:02 38 ******************* 66 2018-09-29 02:03 38 ******************* 67 2018-09-29 02:04 38 ******************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 25 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 140321 Vendor specific


Hardware for Linux and BSD

GitHub