/dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-31-generic] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8U (USB) Device Model: ST1000LM025 HN-M101ABB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: 2BA30002 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Aug 18 14:59:31 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12180) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 203) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 090 081 025 - 3264 4 Start_Stop_Count -O--CK 100 100 000 - 508 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 209 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 3 12 Power_Cycle_Count -O--CK 100 100 000 - 303 191 G-Sense_Error_Rate -O---K 100 100 000 - 2 192 Power-Off_Retract_Count -O---K 100 100 000 - 111 194 Temperature_Celsius -O---- 064 049 000 - 32 (Min/Max 14/51) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 4 223 Load_Retry_Count -O--CK 100 100 000 - 3 225 Load_Cycle_Count -O--CK 100 100 000 - 9223 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 24/32 Celsius Lifetime Min/Max Temperature: 16/51 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (73) Index Estimated Time Temperature Celsius 74 2024-08-18 04:20 32 ************* 75 2024-08-18 04:25 28 ********* 76 2024-08-18 04:30 28 ********* 77 2024-08-18 04:35 28 ********* 78 2024-08-18 04:40 29 ********** 79 2024-08-18 04:45 29 ********** 80 2024-08-18 04:50 29 ********** 81 2024-08-18 04:55 32 ************* 82 2024-08-18 05:00 34 *************** 83 2024-08-18 05:05 36 ***************** 84 2024-08-18 05:10 38 ******************* 85 2024-08-18 05:15 32 ************* 86 2024-08-18 05:20 32 ************* 87 2024-08-18 05:25 25 ****** 88 2024-08-18 05:30 25 ****** 89 2024-08-18 05:35 25 ****** 90 2024-08-18 05:40 27 ******** 91 2024-08-18 05:45 27 ******** 92 2024-08-18 05:50 21 ** 93 2024-08-18 05:55 27 ******** 94 2024-08-18 06:00 31 ************ 95 2024-08-18 06:05 29 ********** 96 2024-08-18 06:10 29 ********** 97 2024-08-18 06:15 24 ***** 98 2024-08-18 06:20 28 ********* 99 2024-08-18 06:25 30 *********** 100 2024-08-18 06:30 32 ************* 101 2024-08-18 06:35 26 ******* 102 2024-08-18 06:40 22 *** 103 2024-08-18 06:45 24 ***** 104 2024-08-18 06:50 28 ********* 105 2024-08-18 06:55 32 ************* 106 2024-08-18 07:00 34 *************** 107 2024-08-18 07:05 23 **** 108 2024-08-18 07:10 27 ******** 109 2024-08-18 07:15 31 ************ 110 2024-08-18 07:20 31 ************ 111 2024-08-18 07:25 24 ***** 112 2024-08-18 07:30 21 ** 113 2024-08-18 07:35 28 ********* 114 2024-08-18 07:40 30 *********** 115 2024-08-18 07:45 31 ************ 116 2024-08-18 07:50 30 *********** 117 2024-08-18 07:55 26 ******* 118 2024-08-18 08:00 29 ********** 119 2024-08-18 08:05 29 ********** 120 2024-08-18 08:10 30 *********** 121 2024-08-18 08:15 33 ************** 122 2024-08-18 08:20 29 ********** 123 2024-08-18 08:25 34 *************** 124 2024-08-18 08:30 38 ******************* 125 2024-08-18 08:35 41 ********************** 126 2024-08-18 08:40 42 *********************** 127 2024-08-18 08:45 44 ************************* 0 2024-08-18 08:50 44 ************************* 1 2024-08-18 08:55 45 ************************** 2 2024-08-18 09:00 46 *************************** 3 2024-08-18 09:05 46 *************************** 4 2024-08-18 09:10 46 *************************** 5 2024-08-18 09:15 47 **************************** 6 2024-08-18 09:20 47 **************************** 7 2024-08-18 09:25 47 **************************** 8 2024-08-18 09:30 43 ************************ 9 2024-08-18 09:35 34 *************** 10 2024-08-18 09:40 35 **************** 11 2024-08-18 09:45 25 ****** 12 2024-08-18 09:50 27 ******** 13 2024-08-18 09:55 27 ******** 14 2024-08-18 10:00 29 ********** 15 2024-08-18 10:05 28 ********* 16 2024-08-18 10:10 30 *********** 17 2024-08-18 10:15 31 ************ 18 2024-08-18 10:20 31 ************ 19 2024-08-18 10:25 32 ************* 20 2024-08-18 10:30 32 ************* 21 2024-08-18 10:35 20 * 22 2024-08-18 10:40 24 ***** 23 2024-08-18 10:45 27 ******** 24 2024-08-18 10:50 31 ************ 25 2024-08-18 10:55 27 ******** 26 2024-08-18 11:00 23 **** 27 2024-08-18 11:05 26 ******* 28 2024-08-18 11:10 28 ********* 29 2024-08-18 11:15 29 ********** 30 2024-08-18 11:20 28 ********* 31 2024-08-18 11:25 19 - 32 2024-08-18 11:30 22 *** 33 2024-08-18 11:35 23 **** 34 2024-08-18 11:40 25 ****** 35 2024-08-18 11:45 28 ********* 36 2024-08-18 11:50 29 ********** 37 2024-08-18 11:55 31 ************ 38 2024-08-18 12:00 30 *********** 39 2024-08-18 12:05 32 ************* 40 2024-08-18 12:10 30 *********** 41 2024-08-18 12:15 26 ******* 42 2024-08-18 12:20 28 ********* 43 2024-08-18 12:25 30 *********** 44 2024-08-18 12:30 31 ************ 45 2024-08-18 12:35 32 ************* 46 2024-08-18 12:40 26 ******* 47 2024-08-18 12:45 29 ********** 48 2024-08-18 12:50 30 *********** 49 2024-08-18 12:55 31 ************ 50 2024-08-18 13:00 32 ************* 51 2024-08-18 13:05 30 *********** 52 2024-08-18 13:10 31 ************ 53 2024-08-18 13:15 31 ************ 54 2024-08-18 13:20 32 ************* 55 2024-08-18 13:25 32 ************* 56 2024-08-18 13:30 22 *** 57 2024-08-18 13:35 24 ***** 58 2024-08-18 13:40 25 ****** 59 2024-08-18 13:45 26 ******* 60 2024-08-18 13:50 26 ******* 61 2024-08-18 13:55 24 ***** 62 2024-08-18 14:00 26 ******* 63 2024-08-18 14:05 27 ******** 64 2024-08-18 14:10 27 ******** 65 2024-08-18 14:15 27 ******** 66 2024-08-18 14:20 24 ***** 67 2024-08-18 14:25 26 ******* 68 2024-08-18 14:30 29 ********** 69 2024-08-18 14:35 30 *********** 70 2024-08-18 14:40 29 ********** 71 2024-08-18 14:45 27 ******** 72 2024-08-18 14:50 30 *********** 73 2024-08-18 14:55 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific