/dev/sda smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-45-generic] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ADATA SU800 Serial Number: -- LU WWN Device Id: 5 707c18 ... Firmware Version: R0918B User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 6 13:25:25 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown (0xe001) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 793 12 Power_Cycle_Count ------ 100 100 000 - 541 160 Unknown_Attribute ------ 100 100 000 - 0 161 Unknown_Attribute ------ 100 100 000 - 49 163 Unknown_Attribute ------ 100 100 000 - 6 164 Unknown_Attribute ------ 100 100 000 - 11018 165 Unknown_Attribute ------ 100 100 000 - 22 166 Unknown_Attribute ------ 100 100 000 - 2 167 Unknown_Attribute ------ 100 100 000 - 8 168 Unknown_Attribute ------ 100 100 000 - 1000 169 Unknown_Attribute ------ 100 100 000 - 100 175 Program_Fail_Count_Chip ------ 100 100 000 - 0 176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 177 Wear_Leveling_Count ------ 100 100 050 - 6 178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 62 194 Temperature_Celsius ------ 100 100 000 - 38 195 Hardware_ECC_Recovered ------ 100 100 000 - 0 196 Reallocated_Event_Count ------ 100 100 016 - 0 197 Current_Pending_Sector ------ 100 100 000 - 0 198 Offline_Uncorrectable ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Total_LBAs_Written ------ 100 100 000 - 80852 242 Total_LBAs_Read ------ 100 100 000 - 55731 245 Unknown_Attribute ------ 100 100 000 - 88144 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 6 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: 28/38 Celsius Lifetime Min/Max Temperature: 0/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (86) Index Estimated Time Temperature Celsius 87 2020-04-06 11:18 45 ************************** ... ..( 9 skipped). .. ************************** 97 2020-04-06 11:28 45 ************************** 98 2020-04-06 11:29 47 **************************** ... ..( 67 skipped). .. **************************** 38 2020-04-06 12:37 47 **************************** 39 2020-04-06 12:38 31 ************ 40 2020-04-06 12:39 28 ********* 41 2020-04-06 12:40 35 **************** 42 2020-04-06 12:41 37 ****************** 43 2020-04-06 12:42 38 ******************* ... ..( 2 skipped). .. ******************* 46 2020-04-06 12:45 38 ******************* 47 2020-04-06 12:46 40 ********************* ... ..( 3 skipped). .. ********************* 51 2020-04-06 12:50 40 ********************* 52 2020-04-06 12:51 42 *********************** ... ..( 7 skipped). .. *********************** 60 2020-04-06 12:59 42 *********************** 61 2020-04-06 13:00 44 ************************* ... ..( 9 skipped). .. ************************* 71 2020-04-06 13:10 44 ************************* 72 2020-04-06 13:11 45 ************************** ... ..( 8 skipped). .. ************************** 81 2020-04-06 13:20 45 ************************** 82 2020-04-06 13:21 28 ********* 83 2020-04-06 13:22 37 ****************** 84 2020-04-06 13:23 37 ****************** 85 2020-04-06 13:24 38 ******************* 86 2020-04-06 13:25 45 ************************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 541 --- Lifetime Power-On Resets 0x01 0x010 4 793 --- Power-on Hours 0x01 0x018 6 1003812779 --- Logical Sectors Written 0x01 0x020 6 63523293 --- Number of Write Commands 0x01 0x028 6 3652440678 --- Logical Sectors Read 0x01 0x030 6 62803944 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 62 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2805 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-45-generic] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: HGST HTS545050A7E680 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GR2OA3J0 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 6 13:25:25 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 123) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 214 100 033 - 1 4 Start_Stop_Count -O--CK 097 097 000 - 5659 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 089 089 000 - 4826 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2222 183 Runtime_Bad_Block -O--CK 001 001 001 NOW 143 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 099 000 - 2097157 188 Command_Timeout -O--CK 100 097 000 - 163211509814 190 Airflow_Temperature_Cel -O---K 074 054 045 - 26 (Min/Max 24/26) 191 G-Sense_Error_Rate -O--CK 098 098 000 - 634 192 Power-Off_Retract_Count -O--CK 100 100 000 - 10289309 193 Load_Cycle_Count -O--CK 095 095 000 - 52911 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 097 097 000 - 949 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 954 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 954 [1] occurred at disk power-on lifetime: 4826 hours (201 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 01 00 00 1d 1c 38 07 0d 00 Error: ICRC, ABRT at LBA = 0x1d1c3807 = 488388615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 10 00 00 1d 1c 38 00 40 00 00:00:14.938 WRITE FPDMA QUEUED 60 00 08 00 f0 00 00 3a 38 5f f8 40 00 00:00:14.937 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:14.904 FLUSH CACHE EXT 61 00 08 00 d8 00 00 2b a0 38 00 40 00 00:00:14.887 WRITE FPDMA QUEUED 61 00 78 00 d0 00 00 1d 1c 38 08 40 00 00:00:14.887 WRITE FPDMA QUEUED Error 953 [0] occurred at disk power-on lifetime: 4826 hours (201 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 01 00 00 0e 84 08 07 0e 00 Error: ICRC, ABRT at LBA = 0x0e840807 = 243533831 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 e8 00 00 0e 84 08 00 40 00 00:00:14.258 WRITE FPDMA QUEUED 60 00 08 00 b0 00 00 00 00 18 00 40 00 00:00:14.258 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:00:14.258 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:00:14.247 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:14.246 IDENTIFY DEVICE Error 952 [3] occurred at disk power-on lifetime: 4826 hours (201 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 01 00 00 0e 84 08 07 0e 00 Error: ICRC, ABRT at LBA = 0x0e840807 = 243533831 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 c8 00 00 0e 84 08 00 40 00 00:00:13.903 WRITE FPDMA QUEUED 60 00 08 00 a8 00 00 00 00 18 00 40 00 00:00:13.890 READ FPDMA QUEUED 60 00 08 00 c0 00 00 00 04 08 00 40 00 00:00:13.890 READ FPDMA QUEUED 60 00 68 00 b8 00 00 1d 1c 37 88 40 00 00:00:13.890 READ FPDMA QUEUED 60 00 80 00 b0 00 00 1d 1c 37 00 40 00 00:00:13.890 READ FPDMA QUEUED Error 951 [2] occurred at disk power-on lifetime: 4823 hours (200 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 e9 00 00 0c 80 12 1f 0c 00 Error: ICRC, ABRT at LBA = 0x0c80121f = 209719839 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 08 00 b0 00 00 0c 80 12 00 40 00 00:05:41.172 READ FPDMA QUEUED 60 00 08 00 a8 00 00 0c 81 18 48 40 00 00:05:41.162 READ FPDMA QUEUED 60 01 08 00 a0 00 00 0c 80 0e 00 40 00 00:05:41.143 READ FPDMA QUEUED 60 00 08 00 98 00 00 04 81 1a f0 40 00 00:05:41.122 READ FPDMA QUEUED 60 00 08 00 78 00 00 10 01 3d a8 40 00 00:05:41.118 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4303 - # 2 Extended offline Completed without error 00% 4302 - # 3 Short offline Completed without error 00% 4300 - # 4 Short offline Completed without error 00% 4300 - # 5 Short offline Completed without error 00% 3125 - # 6 Extended offline Aborted by host 20% 1444 - # 7 Short offline Completed without error 00% 1442 - # 8 Short offline Completed without error 00% 1442 - # 9 Short offline Completed without error 00% 1442 - #10 Short offline Completed without error 00% 1389 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 24/27 Celsius Lifetime Min/Max Temperature: 10/46 Celsius Specified Max Operating Temperature: 31 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (2) Index Estimated Time Temperature Celsius 3 2020-04-06 11:18 31 ************ ... ..( 59 skipped). .. ************ 63 2020-04-06 12:18 31 ************ 64 2020-04-06 12:19 32 ************* ... ..( 3 skipped). .. ************* 68 2020-04-06 12:23 32 ************* 69 2020-04-06 12:24 31 ************ 70 2020-04-06 12:25 32 ************* ... ..( 3 skipped). .. ************* 74 2020-04-06 12:29 32 ************* 75 2020-04-06 12:30 31 ************ ... ..( 7 skipped). .. ************ 83 2020-04-06 12:38 31 ************ 84 2020-04-06 12:39 30 *********** ... ..( 31 skipped). .. *********** 116 2020-04-06 13:11 30 *********** 117 2020-04-06 13:12 ? - 118 2020-04-06 13:13 24 ***** 119 2020-04-06 13:14 24 ***** 120 2020-04-06 13:15 25 ****** ... ..( 4 skipped). .. ****** 125 2020-04-06 13:20 25 ****** 126 2020-04-06 13:21 26 ******* ... ..( 3 skipped). .. ******* 2 2020-04-06 13:25 26 ******* SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 3 Command failed due to ICRC error 0x0002 2 3 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 3 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 57 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 3 CRC errors within host-to-device FIS 0x000d 2 3 Non-CRC errors within host-to-device FIS