/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.16.19-200.fc35.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 PRO 2TB Serial Number: -- Firmware Version: 3B2QGXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 2,000,398,934,016 [2.00 TB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2,000,398,934,016 [2.00 TB] Namespace 1 Utilization: 1,252,829,671,424 [1.25 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Thu Apr 14 15:16:17 2022 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.49W - - 0 0 0 0 0 0 1 + 4.48W - - 1 1 1 1 0 200 2 + 3.18W - - 2 2 2 2 0 1000 3 - 0.0400W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 36 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 2,639,817 [1.35 TB] Data Units Written: 7,836,529 [4.01 TB] Host Read Commands: 15,034,733 Host Write Commands: 26,921,712 Controller Busy Time: 365 Power Cycles: 124 Power On Hours: 88 Unsafe Shutdowns: 7 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 36 Celsius Temperature Sensor 2: 37 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.16.19-200.fc35.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 PRO 2TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXM02B6Q User Capacity: 2,048,408,248,320 bytes [2.04 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 14 15:16:17 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 600) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 1 9 Power_On_Hours -O--CK 096 096 000 - 20094 12 Power_Cycle_Count -O--CK 097 097 000 - 2276 177 Wear_Leveling_Count PO--C- 097 097 000 - 51 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 1 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 099 099 010 - 1 187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 42 190 Airflow_Temperature_Cel -O--CK 069 039 000 - 31 195 ECC_Error_Rate -O-RC- 199 199 000 - 42 199 CRC_Error_Count -OSRCK 099 099 000 - 20 235 POR_Recovery_Count -O--C- 099 099 000 - 52 241 Total_LBAs_Written -O--CK 099 099 000 - 54752874456 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 42 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 42 [1] occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 64 5d 03 d8 40 00 Error: UNC at LBA = 0x645d03d8 = 1683817432 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 64 5d 03 d8 40 00 00:16:08.000 READ FPDMA QUEUED 47 00 00 00 01 00 00 00 00 06 30 40 11 00:16:08.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 40 11 00:16:08.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 40 11 00:16:08.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 08 30 40 11 00:16:08.000 READ LOG DMA EXT Error 41 [0] occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 88 00 00 64 5d 03 d8 40 00 Error: UNC at LBA = 0x645d03d8 = 1683817432 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 88 00 00 64 5d 03 d8 40 11 00:16:08.000 READ FPDMA QUEUED 47 00 00 00 01 00 00 00 00 06 30 40 15 00:16:08.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 40 15 00:16:08.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 40 15 00:16:08.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 08 30 40 15 00:16:08.000 READ LOG DMA EXT Error 40 [3] occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 a8 00 00 64 5d 03 d8 40 00 Error: UNC at LBA = 0x645d03d8 = 1683817432 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a8 00 00 64 5d 03 d8 40 15 00:16:08.000 READ FPDMA QUEUED 60 00 08 00 a0 00 00 64 5d 03 d0 40 14 00:16:08.000 READ FPDMA QUEUED 60 00 08 00 98 00 00 64 5d 03 c8 40 13 00:16:08.000 READ FPDMA QUEUED 60 00 08 00 90 00 00 64 5d 03 c0 40 12 00:16:08.000 READ FPDMA QUEUED 60 00 08 00 88 00 00 64 5d 03 b8 40 11 00:16:08.000 READ FPDMA QUEUED Error 39 [2] occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 98 00 00 64 5d 02 18 40 00 Error: UNC at LBA = 0x645d0218 = 1683816984 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 f0 00 98 00 00 64 5d 02 18 40 13 00:16:08.000 READ FPDMA QUEUED 60 01 00 00 90 00 00 64 5d 01 18 40 12 00:16:08.000 READ FPDMA QUEUED 60 00 40 00 88 00 00 64 5d 00 d8 40 11 00:16:08.000 READ FPDMA QUEUED 60 01 00 00 80 00 00 64 5c ff d8 40 10 00:16:08.000 READ FPDMA QUEUED 60 01 50 00 78 00 00 64 5c fe 88 40 0f 00:16:08.000 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 19/32 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 3488177921/4052615168 SMART Status: 0xc59f (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (37) Index Estimated Time Temperature Celsius 38 2022-04-13 18:00 ? - ... ..( 88 skipped). .. - 127 2022-04-14 08:50 ? - 0 2022-04-14 09:00 19 - 1 2022-04-14 09:10 23 **** 2 2022-04-14 09:20 25 ****** 3 2022-04-14 09:30 27 ******** 4 2022-04-14 09:40 29 ********** ... ..( 2 skipped). .. ********** 7 2022-04-14 10:10 29 ********** 8 2022-04-14 10:20 30 *********** ... ..( 5 skipped). .. *********** 14 2022-04-14 11:20 30 *********** 15 2022-04-14 11:30 31 ************ 16 2022-04-14 11:40 31 ************ 17 2022-04-14 11:50 32 ************* 18 2022-04-14 12:00 32 ************* 19 2022-04-14 12:10 32 ************* 20 2022-04-14 12:20 31 ************ ... ..( 2 skipped). .. ************ 23 2022-04-14 12:50 31 ************ 24 2022-04-14 13:00 30 *********** ... ..( 2 skipped). .. *********** 27 2022-04-14 13:30 30 *********** 28 2022-04-14 13:40 29 ********** ... ..( 3 skipped). .. ********** 32 2022-04-14 14:20 29 ********** 33 2022-04-14 14:30 30 *********** 34 2022-04-14 14:40 31 ************ ... ..( 2 skipped). .. ************ 37 2022-04-14 15:10 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 108 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.16.19-200.fc35.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron Client SSDs Device Model: CT2000MX500SSD1 Serial Number: -- LU WWN Device Id: 5 00a075 ... Firmware Version: M3CR023 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 14 15:16:17 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 000 - 9481 12 Power_Cycle_Count -O--CK 100 100 000 - 811 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Ave_Block-Erase_Count -O--CK 100 100 000 - 6 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 6 180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 90 183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 184 Error_Correction_Count -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 067 042 000 - 33 (Min/Max 0/58) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 206 Write_Error_Rate -OSR-- 100 100 000 - 0 210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 246 Total_LBAs_Written -O--CK 100 100 000 - 9256204296 247 Host_Program_Page_Count -O--CK 100 100 000 - 148274257 248 FTL_Program_Page_Count -O--CK 100 100 000 - 175605829 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Completed [00% left] (0-65535) Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 21/45 Celsius Lifetime Min/Max Temperature: 0/58 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (92) Index Estimated Time Temperature Celsius 93 2022-04-14 13:09 38 ******************* ... ..( 3 skipped). .. ******************* 97 2022-04-14 13:13 38 ******************* 98 2022-04-14 13:14 33 ************** 99 2022-04-14 13:15 30 *********** 100 2022-04-14 13:16 30 *********** 101 2022-04-14 13:17 28 ********* ... ..( 7 skipped). .. ********* 109 2022-04-14 13:25 28 ********* 110 2022-04-14 13:26 31 ************ 111 2022-04-14 13:27 30 *********** 112 2022-04-14 13:28 31 ************ 113 2022-04-14 13:29 36 ***************** 114 2022-04-14 13:30 38 ******************* 115 2022-04-14 13:31 40 ********************* ... ..( 14 skipped). .. ********************* 2 2022-04-14 13:46 40 ********************* 3 2022-04-14 13:47 56 ************************************* 4 2022-04-14 13:48 41 ********************** 5 2022-04-14 13:49 40 ********************* 6 2022-04-14 13:50 40 ********************* 7 2022-04-14 13:51 38 ******************* 8 2022-04-14 13:52 35 **************** 9 2022-04-14 13:53 31 ************ 10 2022-04-14 13:54 31 ************ 11 2022-04-14 13:55 31 ************ 12 2022-04-14 13:56 30 *********** ... ..( 2 skipped). .. *********** 15 2022-04-14 13:59 30 *********** 16 2022-04-14 14:00 28 ********* ... ..( 19 skipped). .. ********* 36 2022-04-14 14:20 28 ********* 37 2022-04-14 14:21 30 *********** 38 2022-04-14 14:22 30 *********** 39 2022-04-14 14:23 ? - 40 2022-04-14 14:24 ? - 41 2022-04-14 14:25 21 ** 42 2022-04-14 14:26 23 **** 43 2022-04-14 14:27 28 ********* 44 2022-04-14 14:28 25 ****** 45 2022-04-14 14:29 25 ****** 46 2022-04-14 14:30 25 ****** 47 2022-04-14 14:31 26 ******* 48 2022-04-14 14:32 28 ********* ... ..( 3 skipped). .. ********* 52 2022-04-14 14:36 28 ********* 53 2022-04-14 14:37 30 *********** ... ..( 9 skipped). .. *********** 63 2022-04-14 14:47 30 *********** 64 2022-04-14 14:48 31 ************ ... ..( 6 skipped). .. ************ 71 2022-04-14 14:55 31 ************ 72 2022-04-14 14:56 30 *********** ... ..( 4 skipped). .. *********** 77 2022-04-14 15:01 30 *********** 78 2022-04-14 15:02 28 ********* ... ..( 4 skipped). .. ********* 83 2022-04-14 15:07 28 ********* 84 2022-04-14 15:08 30 *********** 85 2022-04-14 15:09 30 *********** 86 2022-04-14 15:10 45 ************************** 87 2022-04-14 15:11 31 ************ 88 2022-04-14 15:12 30 *********** 89 2022-04-14 15:13 31 ************ ... ..( 2 skipped). .. ************ 92 2022-04-14 15:16 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 811 --- Lifetime Power-On Resets 0x01 0x010 4 9481 --- Power-on Hours 0x01 0x018 6 666269704 --- Logical Sectors Written 0x01 0x020 6 8008323 --- Number of Write Commands 0x01 0x028 6 379307644 --- Logical Sectors Read 0x01 0x030 6 71617111 --- Number of Read Commands 0x01 0x038 6 4294967296 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 31 --- Average Short Term Temperature 0x05 0x018 1 31 --- Average Long Term Temperature 0x05 0x020 1 58 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 40 --- Highest Average Short Term Temperature 0x05 0x038 1 0 --- Lowest Average Short Term Temperature 0x05 0x040 1 37 --- Highest Average Long Term Temperature 0x05 0x048 1 0 --- Lowest Average Long Term Temperature 0x05 0x050 4 31 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 11592 --- Number of Hardware Resets 0x06 0x010 4 18 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC