Probe #8492e549e2 of Gigabyte AB350M-DS3H V2-CF Desktop Computer (AB350M-DS3H V2)

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.12.xm1-1.klp-xanmod-rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00BBHA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 28 11:29:01 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10440) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 109) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 191 176 021 - 1408 4 Start_Stop_Count -O--CK 098 098 000 - 2723 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4828 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2450 192 Power-Off_Retract_Count -O--CK 200 200 000 - 39 193 Load_Cycle_Count -O--CK 197 197 000 - 9225 194 Temperature_Celsius -O---K 109 105 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 4821 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/35 Celsius Lifetime Min/Max Temperature: 21/38 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (148) Index Estimated Time Temperature Celsius 149 2023-01-28 03:32 33 ************** ... ..(193 skipped). .. ************** 343 2023-01-28 06:46 33 ************** 344 2023-01-28 06:47 34 *************** ... ..( 8 skipped). .. *************** 353 2023-01-28 06:56 34 *************** 354 2023-01-28 06:57 35 **************** ... ..( 71 skipped). .. **************** 426 2023-01-28 08:09 35 **************** 427 2023-01-28 08:10 34 *************** ... ..( 22 skipped). .. *************** 450 2023-01-28 08:33 34 *************** 451 2023-01-28 08:34 35 **************** ... ..( 5 skipped). .. **************** 457 2023-01-28 08:40 35 **************** 458 2023-01-28 08:41 34 *************** ... ..( 11 skipped). .. *************** 470 2023-01-28 08:53 34 *************** 471 2023-01-28 08:54 33 ************** ... ..(154 skipped). .. ************** 148 2023-01-28 11:29 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 29 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 31 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 46384 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.12.xm1-1.klp-xanmod-rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: XrayDisk 512GB SSD Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HPS2227I User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 28 11:29:01 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 1717 12 Power_Cycle_Count -O--CK 100 100 050 - 1322 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 74 164 Unknown_Attribute -O--CK 100 100 050 - 68 165 Unknown_Attribute -O--CK 100 100 050 - 90 166 Unknown_Attribute -O--CK 100 100 050 - 20 167 Unknown_Attribute -O--CK 100 100 050 - 55 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 16777216 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 105007 177 Wear_Leveling_Count -O--CK 100 100 050 - 52258792 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 8 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 11 194 Temperature_Celsius -O--CK 100 100 050 - 41 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 195790 242 Total_LBAs_Read -O--CK 100 100 050 - 163059 245 Unknown_Attribute -O--CK 100 100 050 - 350730 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 671 hours (27 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 40 00 e0 00 07 b2 00 1a 00 00 00 at LBA = 0x7b2001a00 = 33051122176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 e0 00 07 b2 00 1a 00 40 00 06:57:43.030 READ FPDMA QUEUED 60 00 20 00 d8 00 07 b1 00 1a e0 40 00 06:57:43.030 READ FPDMA QUEUED 60 00 20 00 d0 00 07 b1 00 1a c0 40 00 06:57:43.030 READ FPDMA QUEUED 60 00 20 00 c8 00 07 b1 00 1a a0 40 00 06:57:43.030 READ FPDMA QUEUED 60 00 20 00 c0 00 07 b1 00 1a 80 40 00 06:57:43.030 READ FPDMA QUEUED SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1322 --- Lifetime Power-On Resets 0x01 0x010 4 1717 --- Power-on Hours 0x01 0x018 6 12831293440 --- Logical Sectors Written 0x01 0x020 6 131501992 --- Number of Write Commands 0x01 0x028 6 10686234624 --- Logical Sectors Read 0x01 0x030 6 111790904 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 1653 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1900 Device-to-host register FISes sent due to a COMRESET 0x000b 4 1 CRC errors within host-to-device FIS 0x000d 4 1 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub