/dev/sda === START OF INFORMATION SECTION === Device Model: 120GB SSD Serial Number: -- LU WWN Device Id: 5 02b2a2 ... Add. Product Id: mavlsata Firmware Version: V3.2 User Capacity: 120 034 123 776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Nov 4 14:53:50 2017 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x35) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours PO--CK 100 100 010 - 1459 12 Power_Cycle_Count PO--CK 100 100 010 - 662 161 Unknown_Attribute PO--CK 100 100 010 - 0 164 Unknown_Attribute PO--CK 100 100 010 - 7193 165 Unknown_Attribute PO--CK 100 100 010 - 21 166 Unknown_Attribute PO--CK 100 100 010 - 3 167 Unknown_Attribute PO--CK 100 100 010 - 15 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 177 Wear_Leveling_Count PO--CK 100 100 010 - 0 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 194 Temperature_Celsius PO--CK 100 100 010 - 48 195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 241 Total_LBAs_Written PO--CK 100 100 010 - 1780 242 Total_LBAs_Read PO--CK 100 100 010 - 2475 243 Unknown_Attribute PO--CK 100 100 010 - 0 244 Unknown_Attribute PO--CK 100 100 010 - 0 250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 251 Unknown_Attribute PO--CK 100 100 010 - 0 252 Unknown_Attribute PO--CK 100 100 010 - 0 253 Unknown_Attribute PO--CK 100 100 010 - 0 254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD20EARX-008FB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 51.0AB51 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Nov 4 14:53:51 2017 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (34260) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 368) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 195 184 021 - 5233 4 Start_Stop_Count -O--CK 091 091 000 - 9598 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 087 087 000 - 9622 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3949 192 Power-Off_Retract_Count -O--CK 200 200 000 - 193 193 Load_Cycle_Count -O--CK 184 184 000 - 50158 194 Temperature_Celsius -O---K 114 087 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 35/36 Celsius Lifetime Min/Max Temperature: 26/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (69) Index Estimated Time Temperature Celsius 70 2017-11-04 06:56 29 ********** ... ..( 8 skipped). .. ********** 79 2017-11-04 07:05 29 ********** 80 2017-11-04 07:06 ? - 81 2017-11-04 07:07 29 ********** 82 2017-11-04 07:08 29 ********** 83 2017-11-04 07:09 30 *********** 84 2017-11-04 07:10 ? - 85 2017-11-04 07:11 36 ***************** ... ..( 2 skipped). .. ***************** 88 2017-11-04 07:14 36 ***************** 89 2017-11-04 07:15 ? - 90 2017-11-04 07:16 36 ***************** ... ..( 50 skipped). .. ***************** 141 2017-11-04 08:07 36 ***************** 142 2017-11-04 08:08 37 ****************** ... ..( 2 skipped). .. ****************** 145 2017-11-04 08:11 37 ****************** 146 2017-11-04 08:12 38 ******************* ... ..( 2 skipped). .. ******************* 149 2017-11-04 08:15 38 ******************* 150 2017-11-04 08:16 39 ******************** ... ..( 4 skipped). .. ******************** 155 2017-11-04 08:21 39 ******************** 156 2017-11-04 08:22 40 ********************* ... ..( 25 skipped). .. ********************* 182 2017-11-04 08:48 40 ********************* 183 2017-11-04 08:49 41 ********************** ... ..( 40 skipped). .. ********************** 224 2017-11-04 09:30 41 ********************** 225 2017-11-04 09:31 40 ********************* ... ..( 3 skipped). .. ********************* 229 2017-11-04 09:35 40 ********************* 230 2017-11-04 09:36 39 ******************** ... ..( 3 skipped). .. ******************** 234 2017-11-04 09:40 39 ******************** 235 2017-11-04 09:41 38 ******************* ... ..( 6 skipped). .. ******************* 242 2017-11-04 09:48 38 ******************* 243 2017-11-04 09:49 37 ****************** ... ..( 10 skipped). .. ****************** 254 2017-11-04 10:00 37 ****************** 255 2017-11-04 10:01 36 ***************** ... ..( 29 skipped). .. ***************** 285 2017-11-04 10:31 36 ***************** 286 2017-11-04 10:32 35 **************** ... ..( 34 skipped). .. **************** 321 2017-11-04 11:07 35 **************** 322 2017-11-04 11:08 34 *************** ... ..( 43 skipped). .. *************** 366 2017-11-04 11:52 34 *************** 367 2017-11-04 11:53 ? - 368 2017-11-04 11:54 24 ***** 369 2017-11-04 11:55 26 ******* 370 2017-11-04 11:56 27 ******** 371 2017-11-04 11:57 26 ******* 372 2017-11-04 11:58 27 ******** 373 2017-11-04 11:59 27 ******** 374 2017-11-04 12:00 27 ******** 375 2017-11-04 12:01 28 ********* ... ..( 4 skipped). .. ********* 380 2017-11-04 12:06 28 ********* 381 2017-11-04 12:07 29 ********** 382 2017-11-04 12:08 29 ********** 383 2017-11-04 12:09 29 ********** 384 2017-11-04 12:10 30 *********** 385 2017-11-04 12:11 30 *********** 386 2017-11-04 12:12 31 ************ ... ..( 8 skipped). .. ************ 395 2017-11-04 12:21 31 ************ 396 2017-11-04 12:22 32 ************* ... ..( 3 skipped). .. ************* 400 2017-11-04 12:26 32 ************* 401 2017-11-04 12:27 33 ************** ... ..( 4 skipped). .. ************** 406 2017-11-04 12:32 33 ************** 407 2017-11-04 12:33 34 *************** ... ..( 3 skipped). .. *************** 411 2017-11-04 12:37 34 *************** 412 2017-11-04 12:38 35 **************** ... ..( 3 skipped). .. **************** 416 2017-11-04 12:42 35 **************** 417 2017-11-04 12:43 ? - 418 2017-11-04 12:44 36 ***************** 419 2017-11-04 12:45 35 **************** ... ..( 18 skipped). .. **************** 438 2017-11-04 13:04 35 **************** 439 2017-11-04 13:05 36 ***************** ... ..( 79 skipped). .. ***************** 41 2017-11-04 14:25 36 ***************** 42 2017-11-04 14:26 31 ************ 43 2017-11-04 14:27 31 ************ 44 2017-11-04 14:28 30 *********** ... ..( 12 skipped). .. *********** 57 2017-11-04 14:41 30 *********** 58 2017-11-04 14:42 29 ********** ... ..( 10 skipped). .. ********** 69 2017-11-04 14:53 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 6133 Vendor specific /dev/sdc === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD15EADS-00P8B0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.00A01 User Capacity: 1 500 301 910 016 bytes [1,50 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Nov 4 14:53:51 2017 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (34860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 398) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 189 175 021 - 5525 4 Start_Stop_Count -O--CK 082 082 000 - 18837 5 Reallocated_Sector_Ct PO--CK 199 199 140 - 1 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 072 072 000 - 20637 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6872 192 Power-Off_Retract_Count -O--CK 200 200 000 - 555 193 Load_Cycle_Count -O--CK 127 127 000 - 219224 194 Temperature_Celsius -O---K 115 093 000 - 35 196 Reallocated_Event_Count -O--CK 199 199 000 - 1 197 Current_Pending_Sector -O--CK 200 200 000 - 4 198 Offline_Uncorrectable ----CK 200 200 000 - 2 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 54 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 54 [5] occurred at disk power-on lifetime: 19533 hours (813 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 a3 b4 18 90 e0 00 Error: UNC 8 sectors at LBA = 0xa3b41890 = 2746488976 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 a3 b4 18 90 e0 00 02:49:18.653 READ DMA EXT 25 00 00 00 08 00 00 a3 b4 18 88 e0 00 02:49:18.653 READ DMA EXT 35 00 00 00 08 00 00 00 5a aa 98 e0 00 02:49:18.652 WRITE DMA EXT 35 00 00 00 08 00 00 00 5a aa a8 e0 00 02:49:18.652 WRITE DMA EXT 25 00 00 00 08 00 00 a3 b4 18 80 e0 00 02:49:18.651 READ DMA EXT Error 53 [4] occurred at disk power-on lifetime: 19533 hours (813 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 a3 b4 18 80 e0 00 Error: UNC 32 sectors at LBA = 0xa3b41880 = 2746488960 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 a3 b4 18 80 e0 00 02:49:15.887 READ DMA EXT 25 00 00 00 20 00 00 79 da 6b 20 e0 00 02:49:15.869 READ DMA EXT 25 00 00 01 00 00 00 0d f7 79 68 e0 00 02:49:15.868 READ DMA EXT 25 00 00 01 00 00 00 0d f7 78 68 e0 00 02:49:15.866 READ DMA EXT 25 00 00 01 00 00 00 0d f7 77 68 e0 00 02:49:15.865 READ DMA EXT Error 52 [3] occurred at disk power-on lifetime: 19410 hours (808 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 a3 b4 18 00 e0 00 Error: UNC 256 sectors at LBA = 0xa3b41800 = 2746488832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 a3 b4 18 00 e0 00 00:05:54.573 READ DMA EXT 25 00 00 00 08 00 00 a3 b4 18 88 e0 00 00:05:54.572 READ DMA EXT 25 00 00 01 00 00 00 a3 b4 18 00 e0 00 00:05:51.843 READ DMA EXT 25 00 00 01 00 00 00 79 da 6b 00 e0 00 00:05:51.822 READ DMA EXT 25 00 00 01 00 00 00 0e 34 f8 00 e0 00 00:05:51.803 READ DMA EXT Error 51 [2] occurred at disk power-on lifetime: 19410 hours (808 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 a3 b4 18 00 e0 00 Error: UNC 256 sectors at LBA = 0xa3b41800 = 2746488832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 a3 b4 18 00 e0 00 00:05:51.843 READ DMA EXT 25 00 00 01 00 00 00 79 da 6b 00 e0 00 00:05:51.822 READ DMA EXT 25 00 00 01 00 00 00 0e 34 f8 00 e0 00 00:05:51.803 READ DMA EXT 25 00 00 01 00 00 00 87 36 da 00 e0 00 00:05:51.785 READ DMA EXT 25 00 00 01 00 00 00 0e 92 ca 00 e0 00 00:05:51.771 READ DMA EXT Error 50 [1] occurred at disk power-on lifetime: 17331 hours (722 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 a3 b4 18 00 e0 00 Error: UNC at LBA = 0xa3b41800 = 2746488832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:21.501 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:17.777 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:14.052 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:10.327 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:06.603 READ MULTIPLE EXT Error 49 [0] occurred at disk power-on lifetime: 17331 hours (722 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 a3 b4 18 00 e0 00 Error: UNC at LBA = 0xa3b41800 = 2746488832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:17.777 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:14.052 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:10.327 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:06.603 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:02.890 READ MULTIPLE EXT Error 48 [23] occurred at disk power-on lifetime: 17331 hours (722 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 a3 b4 18 00 e0 00 Error: UNC at LBA = 0xa3b41800 = 2746488832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:14.052 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:10.327 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:06.603 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:02.890 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:25:59.169 READ MULTIPLE EXT Error 47 [22] occurred at disk power-on lifetime: 17331 hours (722 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 a3 b4 18 00 e0 00 Error: UNC at LBA = 0xa3b41800 = 2746488832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:10.327 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:06.603 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:26:02.890 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:25:59.169 READ MULTIPLE EXT 29 00 00 01 00 00 00 a3 b4 18 00 e0 00 04:25:55.444 READ MULTIPLE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 5761 1871578752 # 2 Extended offline Interrupted (host reset) 80% 5760 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 34/36 Celsius Lifetime Min/Max Temperature: 27/57 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (206) Index Estimated Time Temperature Celsius 207 2017-11-04 06:56 31 ************ ... ..( 3 skipped). .. ************ 211 2017-11-04 07:00 31 ************ 212 2017-11-04 07:01 30 *********** ... ..( 17 skipped). .. *********** 230 2017-11-04 07:19 30 *********** 231 2017-11-04 07:20 ? - 232 2017-11-04 07:21 30 *********** ... ..( 2 skipped). .. *********** 235 2017-11-04 07:24 30 *********** 236 2017-11-04 07:25 37 ****************** 237 2017-11-04 07:26 37 ****************** 238 2017-11-04 07:27 37 ****************** 239 2017-11-04 07:28 38 ******************* 240 2017-11-04 07:29 38 ******************* 241 2017-11-04 07:30 ? - 242 2017-11-04 07:31 38 ******************* ... ..( 2 skipped). .. ******************* 245 2017-11-04 07:34 38 ******************* 246 2017-11-04 07:35 ? - 247 2017-11-04 07:36 39 ******************** ... ..( 12 skipped). .. ******************** 260 2017-11-04 07:49 39 ******************** 261 2017-11-04 07:50 40 ********************* ... ..( 27 skipped). .. ********************* 289 2017-11-04 08:18 40 ********************* 290 2017-11-04 08:19 41 ********************** ... ..(121 skipped). .. ********************** 412 2017-11-04 10:21 41 ********************** 413 2017-11-04 10:22 40 ********************* 414 2017-11-04 10:23 40 ********************* 415 2017-11-04 10:24 40 ********************* 416 2017-11-04 10:25 39 ******************** ... ..( 2 skipped). .. ******************** 419 2017-11-04 10:28 39 ******************** 420 2017-11-04 10:29 38 ******************* ... ..( 3 skipped). .. ******************* 424 2017-11-04 10:33 38 ******************* 425 2017-11-04 10:34 37 ****************** ... ..( 4 skipped). .. ****************** 430 2017-11-04 10:39 37 ****************** 431 2017-11-04 10:40 36 ***************** ... ..( 20 skipped). .. ***************** 452 2017-11-04 11:01 36 ***************** 453 2017-11-04 11:02 35 **************** ... ..( 50 skipped). .. **************** 26 2017-11-04 11:53 35 **************** 27 2017-11-04 11:54 34 *************** ... ..( 14 skipped). .. *************** 42 2017-11-04 12:09 34 *************** 43 2017-11-04 12:10 35 **************** ... ..( 2 skipped). .. **************** 46 2017-11-04 12:13 35 **************** 47 2017-11-04 12:14 ? - 48 2017-11-04 12:15 26 ******* 49 2017-11-04 12:16 27 ******** 50 2017-11-04 12:17 27 ******** 51 2017-11-04 12:18 28 ********* 52 2017-11-04 12:19 28 ********* 53 2017-11-04 12:20 29 ********** 54 2017-11-04 12:21 29 ********** 55 2017-11-04 12:22 30 *********** ... ..( 2 skipped). .. *********** 58 2017-11-04 12:25 30 *********** 59 2017-11-04 12:26 31 ************ 60 2017-11-04 12:27 31 ************ 61 2017-11-04 12:28 32 ************* ... ..( 4 skipped). .. ************* 66 2017-11-04 12:33 32 ************* 67 2017-11-04 12:34 33 ************** 68 2017-11-04 12:35 33 ************** 69 2017-11-04 12:36 33 ************** 70 2017-11-04 12:37 34 *************** ... ..( 26 skipped). .. *************** 97 2017-11-04 13:04 34 *************** 98 2017-11-04 13:05 ? - 99 2017-11-04 13:06 35 **************** 100 2017-11-04 13:07 34 *************** 101 2017-11-04 13:08 35 **************** 102 2017-11-04 13:09 35 **************** 103 2017-11-04 13:10 35 **************** 104 2017-11-04 13:11 36 ***************** ... ..( 7 skipped). .. ***************** 112 2017-11-04 13:19 36 ***************** 113 2017-11-04 13:20 35 **************** ... ..( 86 skipped). .. **************** 200 2017-11-04 14:47 35 **************** 201 2017-11-04 14:48 31 ************ ... ..( 4 skipped). .. ************ 206 2017-11-04 14:53 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 6132 Vendor specific