Probe #87f36cd220 of ASUSTek P5K SE Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 Device Model: ST3500641AS Serial Number: -- Firmware Version: 2.AAA User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sat Jun 1 10:52:03 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 261) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 084 006 - 74299548 3 Spin_Up_Time PO---- 097 096 000 - 0 4 Start_Stop_Count -O--CK 091 091 020 - 9413 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 088 060 030 - 706873964 9 Power_On_Hours -O--CK 046 046 000 - 47907 10 Spin_Retry_Count PO--C- 100 098 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5538 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 094 094 000 - 6 190 Airflow_Temperature_Cel -O---K 049 034 045 Past 51 (Min/Max 22/51 #2) 194 Temperature_Celsius -O---K 051 066 000 - 51 (0 13 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 059 046 000 - 116286291 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 199 000 - 1 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 39652 hours (1652 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 00 00 00 00 e0 00 Error: IDNF 64 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 3a 60 00 38 10 e0 00 00:10:25.050 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 d0 e0 00 00:10:25.049 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 90 e0 00 00:10:25.048 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 50 e0 00 00:10:25.062 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 10 e0 00 00:10:25.061 READ DMA EXT Error 4 [3] occurred at disk power-on lifetime: 40506 hours (1687 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 00 00 00 00 e0 00 Error: IDNF 64 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 3a 60 00 38 10 e0 00 01:28:12.468 READ DMA EXT 25 00 00 00 40 00 1b cb 00 84 f7 e0 00 01:28:12.453 READ DMA EXT 25 00 00 00 40 00 1b d1 00 7e 59 e0 00 01:28:12.445 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 d0 e0 00 01:28:12.424 READ DMA EXT 25 00 00 00 40 00 1b cb 00 84 b7 e0 00 01:28:12.625 READ DMA EXT Error 3 [2] occurred at disk power-on lifetime: 40425 hours (1684 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 00 00 00 00 e0 00 Error: IDNF 64 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 3a 60 00 38 10 e0 00 00:10:20.791 READ DMA EXT 25 00 00 00 08 00 15 c8 00 73 4f e0 00 00:10:20.771 READ DMA EXT 25 00 00 00 40 00 00 4f 00 07 07 e0 00 00:10:20.756 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 d0 e0 00 00:10:20.730 READ DMA EXT 25 00 00 00 40 00 15 c8 00 73 0f e0 00 00:10:20.710 READ DMA EXT Error 2 [1] occurred at disk power-on lifetime: 39680 hours (1653 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 00 00 00 00 e0 00 Error: IDNF 64 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 3a 60 00 38 10 e0 00 00:13:23.678 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 d0 e0 00 00:13:23.677 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 90 e0 00 00:13:23.689 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 50 e0 00 00:13:23.688 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 10 e0 00 00:13:23.687 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 39652 hours (1652 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 00 00 00 00 e0 00 Error: IDNF 64 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 3a 60 00 38 10 e0 00 00:10:25.050 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 d0 e0 00 00:10:25.049 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 90 e0 00 00:10:25.048 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 50 e0 00 00:10:25.062 READ DMA EXT 25 00 00 00 40 00 3a 5f 00 38 10 e0 00 00:10:25.061 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00RKKA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jun 1 10:52:03 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10560) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 121) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 171 021 - 2200 4 Start_Stop_Count -O--CK 096 096 000 - 4826 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 081 081 000 - 14034 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4322 192 Power-Off_Retract_Count -O--CK 200 200 000 - 740 193 Load_Cycle_Count -O--CK 199 199 000 - 4085 194 Temperature_Celsius -O---K 098 089 000 - 45 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: 22/45 Celsius Lifetime Min/Max Temperature: 22/54 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (179) Index Estimated Time Temperature Celsius 180 2019-06-01 02:55 44 ************************* 181 2019-06-01 02:56 44 ************************* 182 2019-06-01 02:57 44 ************************* 183 2019-06-01 02:58 45 ************************** ... ..(117 skipped). .. ************************** 301 2019-06-01 04:56 45 ************************** 302 2019-06-01 04:57 44 ************************* ... ..( 62 skipped). .. ************************* 365 2019-06-01 06:00 44 ************************* 366 2019-06-01 06:01 45 ************************** ... ..( 72 skipped). .. ************************** 439 2019-06-01 07:14 45 ************************** 440 2019-06-01 07:15 46 *************************** ... ..( 3 skipped). .. *************************** 444 2019-06-01 07:19 46 *************************** 445 2019-06-01 07:20 47 **************************** ... ..( 13 skipped). .. **************************** 459 2019-06-01 07:34 47 **************************** 460 2019-06-01 07:35 48 ***************************** ... ..( 15 skipped). .. ***************************** 476 2019-06-01 07:51 48 ***************************** 477 2019-06-01 07:52 47 **************************** ... ..( 10 skipped). .. **************************** 10 2019-06-01 08:03 47 **************************** 11 2019-06-01 08:04 46 *************************** ... ..( 23 skipped). .. *************************** 35 2019-06-01 08:28 46 *************************** 36 2019-06-01 08:29 ? - 37 2019-06-01 08:30 23 **** 38 2019-06-01 08:31 23 **** 39 2019-06-01 08:32 24 ***** 40 2019-06-01 08:33 26 ******* 41 2019-06-01 08:34 26 ******* 42 2019-06-01 08:35 27 ******** 43 2019-06-01 08:36 27 ******** 44 2019-06-01 08:37 28 ********* 45 2019-06-01 08:38 28 ********* 46 2019-06-01 08:39 29 ********** 47 2019-06-01 08:40 30 *********** 48 2019-06-01 08:41 30 *********** 49 2019-06-01 08:42 31 ************ 50 2019-06-01 08:43 31 ************ 51 2019-06-01 08:44 32 ************* 52 2019-06-01 08:45 33 ************** 53 2019-06-01 08:46 33 ************** 54 2019-06-01 08:47 34 *************** 55 2019-06-01 08:48 34 *************** 56 2019-06-01 08:49 35 **************** ... ..( 2 skipped). .. **************** 59 2019-06-01 08:52 35 **************** 60 2019-06-01 08:53 36 ***************** 61 2019-06-01 08:54 36 ***************** 62 2019-06-01 08:55 36 ***************** 63 2019-06-01 08:56 37 ****************** 64 2019-06-01 08:57 37 ****************** 65 2019-06-01 08:58 38 ******************* 66 2019-06-01 08:59 38 ******************* 67 2019-06-01 09:00 38 ******************* 68 2019-06-01 09:01 39 ******************** ... ..( 2 skipped). .. ******************** 71 2019-06-01 09:04 39 ******************** 72 2019-06-01 09:05 40 ********************* ... ..( 7 skipped). .. ********************* 80 2019-06-01 09:13 40 ********************* 81 2019-06-01 09:14 41 ********************** 82 2019-06-01 09:15 41 ********************** 83 2019-06-01 09:16 ? - 84 2019-06-01 09:17 22 *** 85 2019-06-01 09:18 23 **** 86 2019-06-01 09:19 23 **** 87 2019-06-01 09:20 25 ****** 88 2019-06-01 09:21 26 ******* 89 2019-06-01 09:22 26 ******* 90 2019-06-01 09:23 27 ******** 91 2019-06-01 09:24 27 ******** 92 2019-06-01 09:25 28 ********* 93 2019-06-01 09:26 28 ********* 94 2019-06-01 09:27 29 ********** 95 2019-06-01 09:28 30 *********** 96 2019-06-01 09:29 30 *********** 97 2019-06-01 09:30 31 ************ 98 2019-06-01 09:31 31 ************ 99 2019-06-01 09:32 32 ************* 100 2019-06-01 09:33 33 ************** 101 2019-06-01 09:34 33 ************** 102 2019-06-01 09:35 34 *************** 103 2019-06-01 09:36 34 *************** 104 2019-06-01 09:37 35 **************** ... ..( 2 skipped). .. **************** 107 2019-06-01 09:40 35 **************** 108 2019-06-01 09:41 36 ***************** 109 2019-06-01 09:42 36 ***************** 110 2019-06-01 09:43 36 ***************** 111 2019-06-01 09:44 37 ****************** 112 2019-06-01 09:45 37 ****************** 113 2019-06-01 09:46 37 ****************** 114 2019-06-01 09:47 38 ******************* 115 2019-06-01 09:48 38 ******************* 116 2019-06-01 09:49 39 ******************** ... ..( 2 skipped). .. ******************** 119 2019-06-01 09:52 39 ******************** 120 2019-06-01 09:53 40 ********************* ... ..( 8 skipped). .. ********************* 129 2019-06-01 10:02 40 ********************* 130 2019-06-01 10:03 41 ********************** ... ..( 5 skipped). .. ********************** 136 2019-06-01 10:09 41 ********************** 137 2019-06-01 10:10 42 *********************** ... ..( 7 skipped). .. *********************** 145 2019-06-01 10:18 42 *********************** 146 2019-06-01 10:19 43 ************************ ... ..( 11 skipped). .. ************************ 158 2019-06-01 10:31 43 ************************ 159 2019-06-01 10:32 44 ************************* ... ..( 19 skipped). .. ************************* 179 2019-06-01 10:52 44 ************************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 13268 Vendor specific


Hardware for Linux and BSD

GitHub