/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 1TB Serial Number: -- Firmware Version: 4B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 130,424,541,184 [130 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon Apr 24 16:36:39 2023 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.54W - - 0 0 0 0 0 0 1 + 7.54W - - 1 1 1 1 0 200 2 + 7.54W - - 2 2 2 2 0 1000 3 - 0.0500W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 35 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 70,026,797 [35.8 TB] Data Units Written: 29,080,849 [14.8 TB] Host Read Commands: 1,041,786,841 Host Write Commands: 664,139,148 Controller Busy Time: 2,806 Power Cycles: 3,556 Power On Hours: 2,409 Unsafe Shutdowns: 1,420 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 35 Celsius Temperature Sensor 2: 39 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA3MA User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Apr 24 16:36:39 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 127 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9812) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 164) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 096 096 016 - 458754 2 Throughput_Performance P-S--- 136 136 054 - 93 3 Spin_Up_Time POS--- 107 107 024 - 362 (Average 343) 4 Start_Stop_Count -O--C- 095 095 000 - 20860 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 142 142 020 - 29 9 Power_On_Hours -O--C- 095 095 000 - 36973 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 13360 192 Power-Off_Retract_Count -O--CK 056 056 000 - 53040 193 Load_Cycle_Count -O--C- 056 056 000 - 53040 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 13/48) 196 Reallocated_Event_Count -O--CK 100 100 000 - 1 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 19 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1580 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1580 [3] occurred at disk power-on lifetime: 36227 hours (1509 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 00 00 00 26 00 00 Error: UNC at LBA = 0x00000026 = 38 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b0 00 00 00 00 00 20 40 00 16d+14:34:04.351 READ FPDMA QUEUED e5 00 00 00 00 00 00 00 00 00 00 00 00 16d+14:34:04.350 CHECK POWER MODE ef 00 10 00 02 00 00 00 00 00 00 a0 00 16d+14:34:04.348 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 16d+14:34:04.347 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 16d+14:34:04.342 IDENTIFY DEVICE Error 1579 [2] occurred at disk power-on lifetime: 36227 hours (1509 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 00 00 00 26 00 00 Error: UNC at LBA = 0x00000026 = 38 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a0 00 00 00 00 00 20 40 00 16d+14:33:45.851 READ FPDMA QUEUED 60 00 08 00 98 00 00 74 70 61 a0 40 00 16d+14:33:45.831 READ FPDMA QUEUED 60 00 08 00 90 00 00 74 70 69 f8 40 00 16d+14:33:45.830 READ FPDMA QUEUED 60 00 08 00 88 00 00 74 70 69 d0 40 00 16d+14:33:45.779 READ FPDMA QUEUED 60 00 08 00 80 00 00 74 70 69 e0 40 00 16d+14:33:45.731 READ FPDMA QUEUED Error 1578 [1] occurred at disk power-on lifetime: 36227 hours (1509 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 00 00 00 26 00 00 Error: UNC at LBA = 0x00000026 = 38 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 10 00 00 00 00 00 20 40 00 16d+14:33:26.558 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 00 16d+14:33:25.945 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 16d+14:33:25.944 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 16d+14:33:25.938 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 16d+14:33:25.937 SET FEATURES [Set transfer mode] Error 1577 [0] occurred at disk power-on lifetime: 36227 hours (1509 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 00 00 00 26 00 00 Error: UNC at LBA = 0x00000026 = 38 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 08 00 00 00 00 00 20 40 00 16d+14:33:07.589 READ FPDMA QUEUED e5 00 00 00 00 00 00 00 00 00 00 00 00 16d+14:33:06.977 CHECK POWER MODE ef 00 10 00 02 00 00 00 00 00 00 a0 00 16d+14:33:06.975 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 16d+14:33:06.974 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 16d+14:33:06.968 IDENTIFY DEVICE SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 60% 36219 22 # 2 Extended offline Completed: read failure 90% 36219 22 # 3 Short offline Completed: read failure 60% 36217 22 # 4 Extended offline Completed: read failure 90% 36217 22 # 5 Short offline Completed without error 00% 6164 - # 6 Short offline Completed without error 00% 932 - # 7 Short offline Completed without error 00% 765 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 21/36 Celsius Lifetime Min/Max Temperature: 13/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (58) Index Estimated Time Temperature Celsius 59 2023-04-24 14:29 36 ***************** 60 2023-04-24 14:30 36 ***************** 61 2023-04-24 14:31 36 ***************** 62 2023-04-24 14:32 35 **************** 63 2023-04-24 14:33 36 ***************** ... ..( 4 skipped). .. ***************** 68 2023-04-24 14:38 36 ***************** 69 2023-04-24 14:39 35 **************** ... ..( 4 skipped). .. **************** 74 2023-04-24 14:44 35 **************** 75 2023-04-24 14:45 36 ***************** 76 2023-04-24 14:46 36 ***************** 77 2023-04-24 14:47 35 **************** ... ..( 16 skipped). .. **************** 94 2023-04-24 15:04 35 **************** 95 2023-04-24 15:05 36 ***************** 96 2023-04-24 15:06 35 **************** ... ..( 6 skipped). .. **************** 103 2023-04-24 15:13 35 **************** 104 2023-04-24 15:14 36 ***************** 105 2023-04-24 15:15 35 **************** 106 2023-04-24 15:16 35 **************** 107 2023-04-24 15:17 35 **************** 108 2023-04-24 15:18 36 ***************** 109 2023-04-24 15:19 36 ***************** 110 2023-04-24 15:20 36 ***************** 111 2023-04-24 15:21 35 **************** 112 2023-04-24 15:22 36 ***************** ... ..( 3 skipped). .. ***************** 116 2023-04-24 15:26 36 ***************** 117 2023-04-24 15:27 35 **************** ... ..( 68 skipped). .. **************** 58 2023-04-24 16:36 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 13360 --- Lifetime Power-On Resets 0x01 0x010 4 36973 --- Power-on Hours 0x01 0x018 6 97981211411 --- Logical Sectors Written 0x01 0x020 6 957126686 --- Number of Write Commands 0x01 0x028 6 1824167323261 --- Logical Sectors Read 0x01 0x030 6 1507998174 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 25306 --- Spindle Motor Power-on Hours 0x03 0x010 4 25346 --- Head Flying Hours 0x03 0x018 4 53040 --- Head Load Events 0x03 0x020 4 1 --- Number of Reallocated Logical Sectors 0x03 0x028 4 3093 --- Read Recovery Attempts 0x03 0x030 4 4294967295 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 364 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 13813 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 33 N-- Average Short Term Temperature 0x05 0x018 1 32 N-- Average Long Term Temperature 0x05 0x020 1 48 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 41 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 39 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 108589 --- Number of Hardware Resets 0x06 0x010 4 48222 --- Number of ASR Events 0x06 0x018 4 19 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: [No Information Found] Serial Number: -- Firmware Version: [No Information Found] Device is: Not in smartctl database 7.3/5319 ATA Version is: [No Information Found] Local Time is: Mon Apr 24 16:36:41 2023 CEST SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: [No Information Found] Serial Number: -- Firmware Version: [No Information Found] Device is: Not in smartctl database 7.3/5319 ATA Version is: [No Information Found] Local Time is: Mon Apr 24 16:36:41 2023 CEST SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: [No Information Found] Serial Number: -- Firmware Version: [No Information Found] Device is: Not in smartctl database 7.3/5319 ATA Version is: [No Information Found] Local Time is: Mon Apr 24 16:36:46 2023 CEST SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. /dev/sde smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: [No Information Found] Serial Number: -- Firmware Version: [No Information Found] Device is: Not in smartctl database 7.3/5319 ATA Version is: [No Information Found] Local Time is: Mon Apr 24 16:36:52 2023 CEST SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.