/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-169-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 840 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXT0BB6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Dec 28 14:01:32 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4800) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 14584 12 Power_Cycle_Count -O--CK 091 091 000 - 8153 177 Wear_Leveling_Count PO--C- 087 087 000 - 153 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 069 046 000 - 31 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 4833 241 Total_LBAs_Written -O--CK 099 099 000 - 69711074004 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/87541 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2023-12-27 16:50 ? - ... ..(126 skipped). .. - 0 2023-12-28 14:00 ? - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-169-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547575A9E384 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JE4OA60A User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Dec 28 14:01:32 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 208) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 184 184 033 - 1 4 Start_Stop_Count -O--C- 092 092 000 - 13436 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 071 071 000 - 12901 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 9367 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 50 193 Load_Cycle_Count -O--C- 001 001 000 - 998708 194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 10/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 38/39 Celsius Lifetime Min/Max Temperature: 10/56 Celsius Specified Max Operating Temperature: 37 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (105) Index Estimated Time Temperature Celsius 106 2023-12-28 11:54 41 ********************** ... ..( 47 skipped). .. ********************** 26 2023-12-28 12:42 41 ********************** 27 2023-12-28 12:43 42 *********************** 28 2023-12-28 12:44 42 *********************** 29 2023-12-28 12:45 42 *********************** 30 2023-12-28 12:46 41 ********************** 31 2023-12-28 12:47 42 *********************** ... ..( 58 skipped). .. *********************** 90 2023-12-28 13:46 42 *********************** 91 2023-12-28 13:47 ? - 92 2023-12-28 13:48 36 ***************** 93 2023-12-28 13:49 36 ***************** 94 2023-12-28 13:50 36 ***************** 95 2023-12-28 13:51 37 ****************** ... ..( 2 skipped). .. ****************** 98 2023-12-28 13:54 37 ****************** 99 2023-12-28 13:55 ? - 100 2023-12-28 13:56 38 ******************* ... ..( 4 skipped). .. ******************* 105 2023-12-28 14:01 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 86 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-169-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.4 Device Model: ST9500420AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0006HPM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Dec 28 14:01:33 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 107) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 113 099 006 - 58494863 3 Spin_Up_Time -O---- 099 097 000 - 0 4 Start_Stop_Count PO--CK 098 098 000 - 2549 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 075 060 030 - 43299697604 9 Power_On_Hours -O--CK 100 089 000 - 618 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count PO--CK 099 037 020 - 1989 183 Runtime_Bad_Block -O--CK 100 253 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 061 044 045 Past 39 (0 1 39 32 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 452 192 Power-Off_Retract_Count -O--CK 100 100 000 - 0 193 Load_Cycle_Count -O--CK 090 090 000 - 21481 194 Temperature_Celsius -O---K 039 056 000 - 39 (0 8 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 047 030 000 - 58494863 196 Reallocated_Event_Count PO--CK 100 100 036 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3 - # 2 Short offline Completed without error 00% 10045 - # 3 Short offline Completed without error 00% 34 - # 4 Short offline Completed without error 00% 33 - # 5 Short offline Completed without error 00% 33 - # 6 Short offline Completed without error 00% 32 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 32/39 Celsius Lifetime Min/Max Temperature: 8/56 Celsius Under/Over Temperature Limit Count: 0/8 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (52) Index Estimated Time Temperature Celsius 53 2023-12-28 11:54 33 ************** ... ..( 3 skipped). .. ************** 57 2023-12-28 11:58 33 ************** 58 2023-12-28 11:59 34 *************** 59 2023-12-28 12:00 33 ************** 60 2023-12-28 12:01 32 ************* 61 2023-12-28 12:02 33 ************** 62 2023-12-28 12:03 32 ************* 63 2023-12-28 12:04 32 ************* 64 2023-12-28 12:05 33 ************** 65 2023-12-28 12:06 32 ************* 66 2023-12-28 12:07 32 ************* 67 2023-12-28 12:08 33 ************** 68 2023-12-28 12:09 32 ************* 69 2023-12-28 12:10 33 ************** 70 2023-12-28 12:11 32 ************* 71 2023-12-28 12:12 33 ************** 72 2023-12-28 12:13 32 ************* 73 2023-12-28 12:14 32 ************* 74 2023-12-28 12:15 32 ************* 75 2023-12-28 12:16 33 ************** 76 2023-12-28 12:17 32 ************* 77 2023-12-28 12:18 32 ************* 78 2023-12-28 12:19 33 ************** 79 2023-12-28 12:20 32 ************* 80 2023-12-28 12:21 32 ************* 81 2023-12-28 12:22 33 ************** 82 2023-12-28 12:23 33 ************** 83 2023-12-28 12:24 33 ************** 84 2023-12-28 12:25 34 *************** 85 2023-12-28 12:26 33 ************** 86 2023-12-28 12:27 33 ************** 87 2023-12-28 12:28 33 ************** 88 2023-12-28 12:29 31 ************ 89 2023-12-28 12:30 32 ************* 90 2023-12-28 12:31 33 ************** ... ..( 3 skipped). .. ************** 94 2023-12-28 12:35 33 ************** 95 2023-12-28 12:36 34 *************** ... ..( 3 skipped). .. *************** 99 2023-12-28 12:40 34 *************** 100 2023-12-28 12:41 32 ************* 101 2023-12-28 12:42 33 ************** 102 2023-12-28 12:43 33 ************** 103 2023-12-28 12:44 33 ************** 104 2023-12-28 12:45 34 *************** 105 2023-12-28 12:46 33 ************** 106 2023-12-28 12:47 33 ************** 107 2023-12-28 12:48 33 ************** 108 2023-12-28 12:49 34 *************** 109 2023-12-28 12:50 34 *************** 110 2023-12-28 12:51 33 ************** 111 2023-12-28 12:52 34 *************** 112 2023-12-28 12:53 35 **************** 113 2023-12-28 12:54 36 ***************** 114 2023-12-28 12:55 ? - 115 2023-12-28 12:56 24 ***** 116 2023-12-28 12:57 25 ****** 117 2023-12-28 12:58 35 **************** 118 2023-12-28 12:59 ? - 119 2023-12-28 13:00 24 ***** 120 2023-12-28 13:01 32 ************* 121 2023-12-28 13:02 38 ******************* 122 2023-12-28 13:03 36 ***************** 123 2023-12-28 13:04 33 ************** 124 2023-12-28 13:05 36 ***************** 125 2023-12-28 13:06 38 ******************* 126 2023-12-28 13:07 39 ******************** ... ..( 2 skipped). .. ******************** 1 2023-12-28 13:10 39 ******************** 2 2023-12-28 13:11 40 ********************* 3 2023-12-28 13:12 39 ******************** 4 2023-12-28 13:13 36 ***************** 5 2023-12-28 13:14 35 **************** 6 2023-12-28 13:15 35 **************** 7 2023-12-28 13:16 36 ***************** 8 2023-12-28 13:17 34 *************** 9 2023-12-28 13:18 35 **************** ... ..( 3 skipped). .. **************** 13 2023-12-28 13:22 35 **************** 14 2023-12-28 13:23 36 ***************** 15 2023-12-28 13:24 34 *************** 16 2023-12-28 13:25 35 **************** 17 2023-12-28 13:26 35 **************** 18 2023-12-28 13:27 34 *************** 19 2023-12-28 13:28 34 *************** 20 2023-12-28 13:29 35 **************** ... ..( 2 skipped). .. **************** 23 2023-12-28 13:32 35 **************** 24 2023-12-28 13:33 34 *************** 25 2023-12-28 13:34 35 **************** 26 2023-12-28 13:35 35 **************** 27 2023-12-28 13:36 35 **************** 28 2023-12-28 13:37 34 *************** 29 2023-12-28 13:38 34 *************** 30 2023-12-28 13:39 35 **************** 31 2023-12-28 13:40 33 ************** 32 2023-12-28 13:41 33 ************** 33 2023-12-28 13:42 34 *************** 34 2023-12-28 13:43 33 ************** ... ..( 2 skipped). .. ************** 37 2023-12-28 13:46 33 ************** 38 2023-12-28 13:47 34 *************** 39 2023-12-28 13:48 33 ************** 40 2023-12-28 13:49 33 ************** 41 2023-12-28 13:50 34 *************** 42 2023-12-28 13:51 33 ************** 43 2023-12-28 13:52 32 ************* 44 2023-12-28 13:53 ? - 45 2023-12-28 13:54 32 ************* 46 2023-12-28 13:55 33 ************** 47 2023-12-28 13:56 34 *************** 48 2023-12-28 13:57 35 **************** 49 2023-12-28 13:58 37 ****************** 50 2023-12-28 13:59 37 ****************** 51 2023-12-28 14:00 38 ******************* 52 2023-12-28 14:01 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS