/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-37-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: INTEL MEMPEK1J016GAH Serial Number: -- Firmware Version: K4110400 PCI Vendor/Subsystem ID: 0x8086 IEEE OUI Identifier: 0x5cd2e4 Controller ID: 0 Number of Namespaces: 1 Namespace 1 Size/Capacity: 14,403,239,936 [14.4 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 5cd2e4 ... Local Time is: Tue Jan 12 18:49:00 2021 CET Firmware Updates (0x02): 1 Slot Optional Admin Commands (0x0006): Format Frmw_DL Optional NVM Commands (0x0046): Wr_Unc DS_Mngmt Timestmp Maximum Data Transfer Size: 32 Pages Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 2.80W - - 0 0 0 0 1000000 30000 1 + 2.20W - - 0 1 0 1 1000000 30000 2 + 1.80W - - 0 2 0 2 1000000 30000 3 - 0.0080W - - 0 0 0 0 1150000 30000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 37 Celsius Available Spare: 100% Available Spare Threshold: 0% Percentage Used: 0% Data Units Read: 2,280,578 [1.16 TB] Data Units Written: 1,739,509 [890 GB] Host Read Commands: 116,869,684 Host Write Commands: 86,394,626 Controller Busy Time: 0 Power Cycles: 1,287 Power On Hours: 1,055 Unsafe Shutdowns: 293 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Error Information (NVMe Log 0x01, max 64 entries) No Errors Logged /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-37-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10SPZX-60Z10T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 04.01A04 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jan 12 18:49:00 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1500) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 283) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 32 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 3 Spin_Up_Time POS--K 058 055 021 - 1183 4 Start_Stop_Count -O--CK 100 100 000 - 1280 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-K 100 100 030 - 15994 9 Power_On_Hours -O--CK 100 100 000 - 966 10 Spin_Retry_Count PO--CK 100 100 050 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1279 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO-RCK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 191 G-Sense_Error_Rate -O--CK 001 001 000 - 1077 192 Power-Off_Retract_Count -O--CK 100 100 000 - 532575944828 193 Load_Cycle_Count -O--CK 077 077 000 - 46791 194 Temperature_Celsius -O---K 034 045 000 - 34 (Min/Max 18/36) 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 100 100 000 - 199965 243 Unknown_Attribute -O--CK 100 100 000 - 808413 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 163 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 163 [18] occurred at disk power-on lifetime: 740 hours (30 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:32:21.280 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:21.280 SECURITY FREEZE LOCK ef 00 10 00 03 00 00 00 00 00 00 f0 00 00:32:21.183 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 f0 00 00:32:21.183 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:32:21.182 IDENTIFY DEVICE Error 162 [17] occurred at disk power-on lifetime: 739 hours (30 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:00:09.946 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:09.945 SECURITY FREEZE LOCK 25 00 00 00 20 00 00 74 70 6d 8f e0 00 00:00:06.549 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 e0 00 00:00:06.548 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d ae e0 00 00:00:06.548 READ DMA EXT Error 161 [16] occurred at disk power-on lifetime: 737 hours (30 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:00:13.356 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:13.356 SECURITY FREEZE LOCK 25 00 00 00 20 00 00 74 70 6d 8f e0 00 00:00:06.442 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 e0 00 00:00:06.442 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d ae e0 00 00:00:06.442 READ DMA EXT Error 160 [15] occurred at disk power-on lifetime: 736 hours (30 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:00:10.470 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:10.470 SECURITY FREEZE LOCK 25 00 00 00 20 00 00 74 70 6d 8f e0 00 00:00:06.588 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 e0 00 00:00:06.588 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d ae e0 00 00:00:06.587 READ DMA EXT Error 159 [14] occurred at disk power-on lifetime: 735 hours (30 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:00:17.724 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:17.724 SECURITY FREEZE LOCK 25 00 00 00 20 00 00 74 70 6d 8f e0 00 00:00:06.544 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 e0 00 00:00:06.544 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d ae e0 00 00:00:06.544 READ DMA EXT Error 158 [13] occurred at disk power-on lifetime: 712 hours (29 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:00:22.910 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:00:22.910 SECURITY FREEZE LOCK 25 00 00 00 20 00 00 74 70 6d 8f e0 00 00:00:06.636 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 e0 00 00:00:06.636 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d ae e0 00 00:00:06.636 READ DMA EXT Error 157 [12] occurred at disk power-on lifetime: 646 hours (26 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 02:07:52.326 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 02:07:52.326 SECURITY FREEZE LOCK 25 00 00 00 20 00 00 74 70 6d 8f e0 00 02:07:52.202 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 e0 00 02:07:52.202 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d ae e0 00 02:07:52.201 READ DMA EXT Error 156 [11] occurred at disk power-on lifetime: 645 hours (26 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 02 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 01:02:50.072 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 01:02:50.072 SECURITY FREEZE LOCK 25 00 00 00 20 00 00 74 70 6d 8f e0 00 01:02:49.933 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 02 e0 00 01:02:49.933 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d ae e0 00 01:02:49.933 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 459 - # 2 Short offline Completed without error 00% 2 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 18/36 Celsius Lifetime Min/Max Temperature: 13/45 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (25) Index Estimated Time Temperature Celsius 26 2021-01-12 16:42 23 **** 27 2021-01-12 16:43 24 ***** 28 2021-01-12 16:44 25 ****** 29 2021-01-12 16:45 26 ******* 30 2021-01-12 16:46 27 ******** 31 2021-01-12 16:47 28 ********* 32 2021-01-12 16:48 29 ********** 33 2021-01-12 16:49 ? - 34 2021-01-12 16:50 19 - 35 2021-01-12 16:51 21 ** 36 2021-01-12 16:52 22 *** 37 2021-01-12 16:53 24 ***** 38 2021-01-12 16:54 25 ****** 39 2021-01-12 16:55 26 ******* 40 2021-01-12 16:56 27 ******** 41 2021-01-12 16:57 27 ******** 42 2021-01-12 16:58 28 ********* 43 2021-01-12 16:59 29 ********** 44 2021-01-12 17:00 30 *********** 45 2021-01-12 17:01 31 ************ 46 2021-01-12 17:02 30 *********** ... ..( 3 skipped). .. *********** 50 2021-01-12 17:06 30 *********** 51 2021-01-12 17:07 31 ************ 52 2021-01-12 17:08 32 ************* 53 2021-01-12 17:09 33 ************** 54 2021-01-12 17:10 33 ************** 55 2021-01-12 17:11 33 ************** 56 2021-01-12 17:12 32 ************* 57 2021-01-12 17:13 32 ************* 58 2021-01-12 17:14 31 ************ 59 2021-01-12 17:15 31 ************ 60 2021-01-12 17:16 30 *********** ... ..( 5 skipped). .. *********** 66 2021-01-12 17:22 30 *********** 67 2021-01-12 17:23 31 ************ 68 2021-01-12 17:24 31 ************ 69 2021-01-12 17:25 31 ************ 70 2021-01-12 17:26 32 ************* ... ..( 7 skipped). .. ************* 78 2021-01-12 17:34 32 ************* 79 2021-01-12 17:35 33 ************** ... ..( 3 skipped). .. ************** 83 2021-01-12 17:39 33 ************** 84 2021-01-12 17:40 34 *************** ... ..( 3 skipped). .. *************** 88 2021-01-12 17:44 34 *************** 89 2021-01-12 17:45 35 **************** 90 2021-01-12 17:46 34 *************** 91 2021-01-12 17:47 35 **************** 92 2021-01-12 17:48 35 **************** 93 2021-01-12 17:49 35 **************** 94 2021-01-12 17:50 34 *************** 95 2021-01-12 17:51 35 **************** 96 2021-01-12 17:52 34 *************** 97 2021-01-12 17:53 34 *************** 98 2021-01-12 17:54 35 **************** ... ..( 7 skipped). .. **************** 106 2021-01-12 18:02 35 **************** 107 2021-01-12 18:03 36 ***************** 108 2021-01-12 18:04 36 ***************** 109 2021-01-12 18:05 35 **************** ... ..( 14 skipped). .. **************** 124 2021-01-12 18:20 35 **************** 125 2021-01-12 18:21 34 *************** 126 2021-01-12 18:22 35 **************** 127 2021-01-12 18:23 34 *************** ... ..( 15 skipped). .. *************** 15 2021-01-12 18:39 34 *************** 16 2021-01-12 18:40 33 ************** 17 2021-01-12 18:41 34 *************** ... ..( 7 skipped). .. *************** 25 2021-01-12 18:49 34 *************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 7263 Vendor specific