Probe #8cd83655c0 of ASUSTek VX7

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD10JPVX-22JC3T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Apr 9 12:13:31 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (17640) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 198) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 182 180 021 - 1883 4 Start_Stop_Count -O--CK 047 047 000 - 53387 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 089 089 000 - 8644 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1514 191 G-Sense_Error_Rate -O--CK 078 078 000 - 22 192 Power-Off_Retract_Count -O--CK 200 200 000 - 141 193 Load_Cycle_Count -O--CK 147 147 000 - 161656 194 Temperature_Celsius -O---K 110 098 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 15 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 37/46 Celsius Lifetime Min/Max Temperature: 0/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (39) Index Estimated Time Temperature Celsius 40 2016-04-09 10:06 40 ********************* ... ..( 19 skipped). .. ********************* 60 2016-04-09 10:26 40 ********************* 61 2016-04-09 10:27 39 ******************** 62 2016-04-09 10:28 40 ********************* ... ..( 6 skipped). .. ********************* 69 2016-04-09 10:35 40 ********************* 70 2016-04-09 10:36 39 ******************** ... ..( 3 skipped). .. ******************** 74 2016-04-09 10:40 39 ******************** 75 2016-04-09 10:41 40 ********************* 76 2016-04-09 10:42 40 ********************* 77 2016-04-09 10:43 40 ********************* 78 2016-04-09 10:44 41 ********************** ... ..( 3 skipped). .. ********************** 82 2016-04-09 10:48 41 ********************** 83 2016-04-09 10:49 42 *********************** 84 2016-04-09 10:50 ? - 85 2016-04-09 10:51 42 *********************** ... ..( 3 skipped). .. *********************** 89 2016-04-09 10:55 42 *********************** 90 2016-04-09 10:56 43 ************************ ... ..( 14 skipped). .. ************************ 105 2016-04-09 11:11 43 ************************ 106 2016-04-09 11:12 44 ************************* ... ..( 4 skipped). .. ************************* 111 2016-04-09 11:17 44 ************************* 112 2016-04-09 11:18 45 ************************** ... ..( 4 skipped). .. ************************** 117 2016-04-09 11:23 45 ************************** 118 2016-04-09 11:24 46 *************************** ... ..( 3 skipped). .. *************************** 122 2016-04-09 11:28 46 *************************** 123 2016-04-09 11:29 45 ************************** 124 2016-04-09 11:30 45 ************************** 125 2016-04-09 11:31 45 ************************** 126 2016-04-09 11:32 44 ************************* ... ..( 5 skipped). .. ************************* 4 2016-04-09 11:38 44 ************************* 5 2016-04-09 11:39 43 ************************ ... ..( 5 skipped). .. ************************ 11 2016-04-09 11:45 43 ************************ 12 2016-04-09 11:46 42 *********************** ... ..( 3 skipped). .. *********************** 16 2016-04-09 11:50 42 *********************** 17 2016-04-09 11:51 41 ********************** ... ..( 3 skipped). .. ********************** 21 2016-04-09 11:55 41 ********************** 22 2016-04-09 11:56 40 ********************* 23 2016-04-09 11:57 40 ********************* 24 2016-04-09 11:58 40 ********************* 25 2016-04-09 11:59 39 ******************** ... ..( 2 skipped). .. ******************** 28 2016-04-09 12:02 39 ******************** 29 2016-04-09 12:03 38 ******************* ... ..( 3 skipped). .. ******************* 33 2016-04-09 12:07 38 ******************* 34 2016-04-09 12:08 37 ****************** ... ..( 2 skipped). .. ****************** 37 2016-04-09 12:11 37 ****************** 38 2016-04-09 12:12 ? - 39 2016-04-09 12:13 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 9 R_ERR response for data FIS 0x0003 2 9 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 18 R_ERR response for non-data FIS 0x0006 2 18 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6462 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5069 Vendor specific


Hardware for Linux and BSD

GitHub