/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.32-generic-3rosa2019.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD10JPVX-22JC3T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Apr 28 17:20:55 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18900) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 211) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 9 3 Spin_Up_Time POS--K 182 180 021 - 1883 4 Start_Stop_Count -O--CK 040 040 000 - 60171 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3465 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4144 191 G-Sense_Error_Rate -O--CK 078 078 000 - 22 192 Power-Off_Retract_Count -O--CK 200 200 000 - 89 193 Load_Cycle_Count -O--CK 130 130 000 - 210794 194 Temperature_Celsius -O---K 110 095 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3070 - # 2 Extended offline Completed without error 00% 3041 - # 3 Extended offline Completed without error 00% 3023 - # 4 Extended offline Completed without error 00% 3011 - # 5 Extended offline Completed without error 00% 3007 - # 6 Extended offline Interrupted (host reset) 80% 2989 - # 7 Extended offline Completed without error 00% 2869 - # 8 Extended offline Completed without error 00% 2787 - # 9 Extended offline Completed without error 00% 2764 - #10 Extended offline Completed without error 00% 2748 - #11 Extended offline Completed without error 00% 2714 - #12 Extended offline Completed without error 00% 2699 - #13 Extended offline Interrupted (host reset) 80% 2494 - #14 Extended offline Interrupted (host reset) 90% 2381 - #15 Extended offline Completed without error 00% 2262 - #16 Extended offline Interrupted (host reset) 90% 2258 - #17 Extended offline Completed without error 00% 2220 - #18 Extended offline Interrupted (host reset) 60% 2119 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 27/37 Celsius Lifetime Min/Max Temperature: 0/52 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (26) Index Estimated Time Temperature Celsius 27 2021-04-28 15:13 33 ************** 28 2021-04-28 15:14 33 ************** 29 2021-04-28 15:15 34 *************** 30 2021-04-28 15:16 34 *************** 31 2021-04-28 15:17 34 *************** 32 2021-04-28 15:18 35 **************** 33 2021-04-28 15:19 35 **************** 34 2021-04-28 15:20 36 ***************** ... ..( 16 skipped). .. ***************** 51 2021-04-28 15:37 36 ***************** 52 2021-04-28 15:38 37 ****************** ... ..( 18 skipped). .. ****************** 71 2021-04-28 15:57 37 ****************** 72 2021-04-28 15:58 38 ******************* 73 2021-04-28 15:59 38 ******************* 74 2021-04-28 16:00 38 ******************* 75 2021-04-28 16:01 37 ****************** ... ..( 10 skipped). .. ****************** 86 2021-04-28 16:12 37 ****************** 87 2021-04-28 16:13 ? - 88 2021-04-28 16:14 23 **** 89 2021-04-28 16:15 24 ***** 90 2021-04-28 16:16 25 ****** 91 2021-04-28 16:17 27 ******** 92 2021-04-28 16:18 27 ******** 93 2021-04-28 16:19 28 ********* 94 2021-04-28 16:20 29 ********** 95 2021-04-28 16:21 30 *********** 96 2021-04-28 16:22 30 *********** 97 2021-04-28 16:23 31 ************ 98 2021-04-28 16:24 33 ************** 99 2021-04-28 16:25 34 *************** 100 2021-04-28 16:26 35 **************** 101 2021-04-28 16:27 35 **************** 102 2021-04-28 16:28 36 ***************** ... ..( 2 skipped). .. ***************** 105 2021-04-28 16:31 36 ***************** 106 2021-04-28 16:32 37 ****************** 107 2021-04-28 16:33 ? - 108 2021-04-28 16:34 28 ********* 109 2021-04-28 16:35 28 ********* 110 2021-04-28 16:36 30 *********** 111 2021-04-28 16:37 30 *********** 112 2021-04-28 16:38 31 ************ 113 2021-04-28 16:39 33 ************** 114 2021-04-28 16:40 33 ************** 115 2021-04-28 16:41 34 *************** 116 2021-04-28 16:42 35 **************** 117 2021-04-28 16:43 35 **************** 118 2021-04-28 16:44 36 ***************** 119 2021-04-28 16:45 36 ***************** 120 2021-04-28 16:46 37 ****************** 121 2021-04-28 16:47 38 ******************* 122 2021-04-28 16:48 38 ******************* 123 2021-04-28 16:49 39 ******************** ... ..( 2 skipped). .. ******************** 126 2021-04-28 16:52 39 ******************** 127 2021-04-28 16:53 40 ********************* ... ..( 4 skipped). .. ********************* 4 2021-04-28 16:58 40 ********************* 5 2021-04-28 16:59 41 ********************** ... ..( 2 skipped). .. ********************** 8 2021-04-28 17:02 41 ********************** 9 2021-04-28 17:03 42 *********************** 10 2021-04-28 17:04 41 ********************** 11 2021-04-28 17:05 41 ********************** 12 2021-04-28 17:06 ? - 13 2021-04-28 17:07 27 ******** 14 2021-04-28 17:08 27 ******** 15 2021-04-28 17:09 28 ********* 16 2021-04-28 17:10 28 ********* 17 2021-04-28 17:11 29 ********** 18 2021-04-28 17:12 30 *********** 19 2021-04-28 17:13 31 ************ 20 2021-04-28 17:14 32 ************* 21 2021-04-28 17:15 33 ************** 22 2021-04-28 17:16 34 *************** 23 2021-04-28 17:17 35 **************** 24 2021-04-28 17:18 35 **************** 25 2021-04-28 17:19 35 **************** 26 2021-04-28 17:20 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 799 Vendor specific