/dev/sda === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT03B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Sep 28 07:13:13 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 3747 12 Power_Cycle_Count -O--CK 099 099 000 - 795 177 Wear_Leveling_Count PO--C- 099 099 000 - 20 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 099 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 063 045 000 - 37 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 111 241 Total_LBAs_Written -O--CK 099 099 000 - 6672874316 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3744 - # 2 Short offline Completed without error 00% 3742 - # 3 Extended offline Interrupted (host reset) 60% 3740 - # 4 Short offline Completed without error 00% 3734 - # 5 Short offline Completed without error 00% 3732 - # 6 Offline Completed without error 00% 3723 - # 7 Short offline Completed without error 00% 3716 - # 8 Short offline Completed without error 00% 3710 - # 9 Short offline Completed without error 00% 3706 - #10 Extended offline Aborted by host 80% 3705 - #11 Short offline Completed without error 00% 3694 - #12 Short offline Completed without error 00% 3688 - #13 Short offline Completed without error 00% 3683 - #14 Short offline Completed without error 00% 3681 - #15 Short offline Completed without error 00% 3676 - #16 Extended offline Interrupted (host reset) 70% 3669 - #17 Short offline Completed without error 00% 3660 - #18 Short offline Completed without error 00% 3659 - #19 Short offline Interrupted (host reset) 40% 3659 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 34/38 Celsius Lifetime Min/Max Temperature: 23/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (16) Index Estimated Time Temperature Celsius 17 2019-09-27 10:00 36 ***************** 18 2019-09-27 10:10 36 ***************** 19 2019-09-27 10:20 ? - 20 2019-09-27 10:30 31 ************ 21 2019-09-27 10:40 33 ************** 22 2019-09-27 10:50 35 **************** 23 2019-09-27 11:00 35 **************** 24 2019-09-27 11:10 36 ***************** 25 2019-09-27 11:20 39 ******************** 26 2019-09-27 11:30 36 ***************** ... ..( 5 skipped). .. ***************** 32 2019-09-27 12:30 36 ***************** 33 2019-09-27 12:40 37 ****************** 34 2019-09-27 12:50 37 ****************** 35 2019-09-27 13:00 37 ****************** 36 2019-09-27 13:10 38 ******************* 37 2019-09-27 13:20 37 ****************** ... ..( 18 skipped). .. ****************** 56 2019-09-27 16:30 37 ****************** 57 2019-09-27 16:40 42 *********************** 58 2019-09-27 16:50 37 ****************** ... ..( 2 skipped). .. ****************** 61 2019-09-27 17:20 37 ****************** 62 2019-09-27 17:30 ? - 63 2019-09-27 17:40 32 ************* 64 2019-09-27 17:50 34 *************** 65 2019-09-27 18:00 36 ***************** 66 2019-09-27 18:10 37 ****************** 67 2019-09-27 18:20 37 ****************** 68 2019-09-27 18:30 38 ******************* 69 2019-09-27 18:40 38 ******************* 70 2019-09-27 18:50 38 ******************* 71 2019-09-27 19:00 37 ****************** 72 2019-09-27 19:10 37 ****************** 73 2019-09-27 19:20 38 ******************* 74 2019-09-27 19:30 38 ******************* 75 2019-09-27 19:40 38 ******************* 76 2019-09-27 19:50 37 ****************** 77 2019-09-27 20:00 38 ******************* 78 2019-09-27 20:10 37 ****************** 79 2019-09-27 20:20 37 ****************** 80 2019-09-27 20:30 38 ******************* 81 2019-09-27 20:40 38 ******************* 82 2019-09-27 20:50 37 ****************** 83 2019-09-27 21:00 38 ******************* 84 2019-09-27 21:10 38 ******************* 85 2019-09-27 21:20 38 ******************* 86 2019-09-27 21:30 37 ****************** 87 2019-09-27 21:40 37 ****************** 88 2019-09-27 21:50 38 ******************* 89 2019-09-27 22:00 ? - 90 2019-09-27 22:10 36 ***************** 91 2019-09-27 22:20 34 *************** 92 2019-09-27 22:30 36 ***************** 93 2019-09-27 22:40 36 ***************** 94 2019-09-27 22:50 37 ****************** 95 2019-09-27 23:00 37 ****************** 96 2019-09-27 23:10 45 ************************** ... ..( 3 skipped). .. ************************** 100 2019-09-27 23:50 45 ************************** 101 2019-09-28 00:00 44 ************************* 102 2019-09-28 00:10 38 ******************* ... ..( 3 skipped). .. ******************* 106 2019-09-28 00:50 38 ******************* 107 2019-09-28 01:00 ? - 108 2019-09-28 01:10 34 *************** 109 2019-09-28 01:20 34 *************** 110 2019-09-28 01:30 37 ****************** 111 2019-09-28 01:40 37 ****************** 112 2019-09-28 01:50 37 ****************** 113 2019-09-28 02:00 38 ******************* 114 2019-09-28 02:10 37 ****************** 115 2019-09-28 02:20 37 ****************** 116 2019-09-28 02:30 ? - 117 2019-09-28 02:40 31 ************ 118 2019-09-28 02:50 34 *************** 119 2019-09-28 03:00 35 **************** 120 2019-09-28 03:10 36 ***************** 121 2019-09-28 03:20 37 ****************** ... ..( 3 skipped). .. ****************** 125 2019-09-28 04:00 37 ****************** 126 2019-09-28 04:10 38 ******************* ... ..( 4 skipped). .. ******************* 3 2019-09-28 05:00 38 ******************* 4 2019-09-28 05:10 ? - 5 2019-09-28 05:20 36 ***************** 6 2019-09-28 05:30 34 *************** 7 2019-09-28 05:40 36 ***************** ... ..( 4 skipped). .. ***************** 12 2019-09-28 06:30 36 ***************** 13 2019-09-28 06:40 37 ****************** ... ..( 2 skipped). .. ****************** 16 2019-09-28 07:10 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 27 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 27 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue EIDE Device Model: WDC WD1600AAJB-00PVA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 00.07H00 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sat Sep 28 07:13:14 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4560) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 61) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x203f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 161 159 021 - 2925 4 Start_Stop_Count -O--CK 099 099 000 - 1175 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 100 253 051 - 0 9 Power_On_Hours -O--CK 098 098 000 - 2127 10 Spin_Retry_Count -O--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1164 192 Power-Off_Retract_Count -O--CK 200 200 000 - 494 193 Load_Cycle_Count -O--CK 200 200 000 - 1176 194 Temperature_Celsius -O---K 106 099 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 23 200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2124 - # 2 Short offline Completed without error 00% 2122 - # 3 Extended offline Completed without error 00% 2120 - # 4 Short offline Completed without error 00% 2114 - # 5 Short offline Completed without error 00% 2112 - # 6 Short offline Completed without error 00% 2096 - # 7 Short offline Completed without error 00% 2091 - # 8 Short offline Completed without error 00% 2086 - # 9 Short offline Completed without error 00% 2074 - #10 Short offline Completed without error 00% 2068 - #11 Short offline Completed without error 00% 2064 - #12 Short offline Completed without error 00% 2061 - #13 Short offline Completed without error 00% 2057 - #14 Extended offline Interrupted (host reset) 50% 2050 - #15 Short offline Completed without error 00% 2041 - #16 Short offline Completed without error 00% 2040 - #17 Short offline Interrupted (host reset) 90% 2040 - #18 Short offline Completed without error 00% 2035 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 23/37 Celsius Lifetime Min/Max Temperature: 24/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (84) Index Estimated Time Temperature Celsius 85 2019-09-28 05:06 38 ******************* 86 2019-09-28 05:07 38 ******************* 87 2019-09-28 05:08 38 ******************* 88 2019-09-28 05:09 ? - 89 2019-09-28 05:10 23 **** 90 2019-09-28 05:11 24 ***** 91 2019-09-28 05:12 25 ****** 92 2019-09-28 05:13 26 ******* 93 2019-09-28 05:14 26 ******* 94 2019-09-28 05:15 27 ******** 95 2019-09-28 05:16 27 ******** 96 2019-09-28 05:17 28 ********* 97 2019-09-28 05:18 28 ********* 98 2019-09-28 05:19 29 ********** 99 2019-09-28 05:20 29 ********** 100 2019-09-28 05:21 30 *********** 101 2019-09-28 05:22 30 *********** 102 2019-09-28 05:23 31 ************ 103 2019-09-28 05:24 31 ************ 104 2019-09-28 05:25 31 ************ 105 2019-09-28 05:26 32 ************* ... ..( 3 skipped). .. ************* 109 2019-09-28 05:30 32 ************* 110 2019-09-28 05:31 33 ************** ... ..( 2 skipped). .. ************** 113 2019-09-28 05:34 33 ************** 114 2019-09-28 05:35 34 *************** ... ..( 7 skipped). .. *************** 122 2019-09-28 05:43 34 *************** 123 2019-09-28 05:44 35 **************** ... ..( 3 skipped). .. **************** 127 2019-09-28 05:48 35 **************** 0 2019-09-28 05:49 36 ***************** ... ..( 40 skipped). .. ***************** 41 2019-09-28 06:30 36 ***************** 42 2019-09-28 06:31 37 ****************** ... ..( 40 skipped). .. ****************** 83 2019-09-28 07:12 37 ****************** 84 2019-09-28 07:13 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported