/dev/sda === START OF INFORMATION SECTION === Model Family: Fujitsu MHV Device Model: FUJITSU MHV2120BH PL Serial Number: -- Firmware Version: 892C User Capacity: 120 034 123 776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Sat Mar 9 17:29:09 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 702) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 82) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 046 - 179893 2 Throughput_Performance P-S--- 100 100 030 - 26673597 3 Spin_Up_Time PO---- 100 100 025 - 1 4 Start_Stop_Count -O--CK 099 099 000 - 4507 5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0) 7 Seek_Error_Rate POSR-- 100 100 047 - 1063 8 Seek_Time_Performance P-S--- 100 100 019 - 0 9 Power_On_Seconds -O--CK 076 076 000 - 3h+27m+41s 10 Spin_Retry_Count PO--C- 100 100 020 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 2299 192 Power-Off_Retract_Count -O--CK 100 100 000 - 62 193 Load_Cycle_Count -O--CK 098 098 000 - 53156 194 Temperature_Celsius -O---K 100 100 000 - 29 (Min/Max 12/57) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 980 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6966) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 12278 203 Run_Out_Cancel -O---- 100 100 000 - 433692737302 240 Head_Flying_Hours -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 51 Comprehensive SMART error log 0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 80% 12418 - # 2 Short offline Aborted by host 80% 61 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Max Temperature: 30 Celsius Lifetime Max Temperature: 57 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (22) Index Estimated Time Temperature Celsius 23 2019-03-09 15:22 39 ******************** 24 2019-03-09 15:23 38 ******************* 25 2019-03-09 15:24 38 ******************* 26 2019-03-09 15:25 38 ******************* 27 2019-03-09 15:26 39 ******************** 28 2019-03-09 15:27 38 ******************* ... ..( 8 skipped). .. ******************* 37 2019-03-09 15:36 38 ******************* 38 2019-03-09 15:37 39 ******************** 39 2019-03-09 15:38 38 ******************* ... ..( 44 skipped). .. ******************* 84 2019-03-09 16:23 38 ******************* 85 2019-03-09 16:24 39 ******************** 86 2019-03-09 16:25 38 ******************* ... ..( 8 skipped). .. ******************* 95 2019-03-09 16:34 38 ******************* 96 2019-03-09 16:35 37 ****************** 97 2019-03-09 16:36 37 ****************** 98 2019-03-09 16:37 38 ******************* ... ..( 13 skipped). .. ******************* 112 2019-03-09 16:51 38 ******************* 113 2019-03-09 16:52 39 ******************** 114 2019-03-09 16:53 38 ******************* ... ..( 4 skipped). .. ******************* 119 2019-03-09 16:58 38 ******************* 120 2019-03-09 16:59 39 ******************** 121 2019-03-09 17:00 38 ******************* 122 2019-03-09 17:01 39 ******************** ... ..( 10 skipped). .. ******************** 5 2019-03-09 17:12 39 ******************** 6 2019-03-09 17:13 ? - 7 2019-03-09 17:14 38 ******************* 8 2019-03-09 17:15 38 ******************* 9 2019-03-09 17:16 38 ******************* 10 2019-03-09 17:17 39 ******************** 11 2019-03-09 17:18 38 ******************* 12 2019-03-09 17:19 39 ******************** 13 2019-03-09 17:20 38 ******************* 14 2019-03-09 17:21 38 ******************* 15 2019-03-09 17:22 ? - 16 2019-03-09 17:23 26 ******* 17 2019-03-09 17:24 27 ******** 18 2019-03-09 17:25 27 ******** 19 2019-03-09 17:26 28 ********* 20 2019-03-09 17:27 29 ********** 21 2019-03-09 17:28 29 ********** 22 2019-03-09 17:29 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC