/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.79-1-lts] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: KBG30ZMS256G NVMe TOSHIBA 256GB Serial Number: -- Firmware Version: ADDA0102 PCI Vendor/Subsystem ID: 0x1179 IEEE OUI Identifier: 0x00080d Controller ID: 0 NVMe Version: 1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00080d ... Local Time is: Fri Nov 19 15:17:38 2021 CET Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0017): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.30W - - 0 0 0 0 0 0 1 + 2.70W - - 1 1 1 1 0 0 2 + 2.30W - - 2 2 2 2 0 0 3 - 0.0500W - - 3 3 3 3 10000 45000 4 - 0.0050W - - 4 4 4 4 10000 50000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 - 4096 0 0 1 + 512 0 3 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 40 Celsius Available Spare: 100% Available Spare Threshold: 50% Percentage Used: 17% Data Units Read: 19,791,436 [10.1 TB] Data Units Written: 22,500,442 [11.5 TB] Host Read Commands: 336,638,257 Host Write Commands: 702,938,543 Controller Busy Time: 3,802 Power Cycles: 1,731 Power On Hours: 9,673 Unsafe Shutdowns: 59 Media and Data Integrity Errors: 0 Error Information Log Entries: 338 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 40 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.79-1-lts] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: Patriot Blaze Serial Number: -- Firmware Version: S8FM07.9 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Nov 19 15:17:38 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 255) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 20000 12 Power_Cycle_Count -O--C- 100 100 000 - 4251 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 14 170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/756 173 MaxAvgErase_Ct -O--C- 100 100 000 - 393 (Average 343) 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 74 218 CRC_Error_Count PO-R-- 100 100 050 - 1 231 SSD_Life_Left PO--C- 100 100 000 - 88 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 15571 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 00% 0 - # 2 Short offline Aborted by host 00% 0 - # 3 Short offline Aborted by host 00% 0 - # 4 Short offline Aborted by host 00% 0 - # 5 Short offline Aborted by host 00% 0 - # 6 Extended offline Completed without error 00% 28 - # 7 Short offline Aborted by host 00% 0 - # 8 Short offline Aborted by host 00% 0 - # 9 Short offline Aborted by host 00% 0 - #10 Short offline Aborted by host 00% 0 - #11 Short offline Aborted by host 00% 0 - #12 Short offline Aborted by host 00% 0 - #13 Short offline Aborted by host 00% 0 - #14 Short offline Completed without error 00% 0 - #15 Short offline Aborted by host 00% 0 - #16 Short offline Aborted by host 00% 0 - #17 Short offline Completed without error 00% 0 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 106 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 17 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.79-1-lts] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 5K1000 Device Model: HGST HTS541010A9E680 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JA0OA590 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 19 15:17:38 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 222) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 098 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 173 100 033 - 1 4 Start_Stop_Count -O--CK 094 094 000 - 9632 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 048 048 000 - 22931 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 4148 183 Runtime_Bad_Block -O--CK 096 096 000 - 4 184 End-to-End_Error PO--CK 098 098 097 - 131072 187 Reported_Uncorrect -O--CK 100 100 000 - 55834771466 188 Command_Timeout -O--CK 100 099 000 - 227639689557 190 Airflow_Temperature_Cel -O---K 072 050 045 - 28 (Min/Max 19/29) 191 G-Sense_Error_Rate -O--CK 087 087 000 - 3541 192 Power-Off_Retract_Count -O--CK 100 100 000 - 3735609 193 Load_Cycle_Count -O--CK 055 055 000 - 450361 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 135 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 145 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 145 [0] occurred at disk power-on lifetime: 17692 hours (737 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:57:37.946 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 01 a0 ff 01:57:37.615 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 ff 01:57:37.614 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:57:32.566 IDENTIFY DEVICE b0 00 da 00 01 00 00 00 00 00 01 a0 ff 01:57:32.238 SMART RETURN STATUS Error 144 [3] occurred at disk power-on lifetime: 17692 hours (737 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:57:32.566 IDENTIFY DEVICE b0 00 da 00 01 00 00 00 00 00 01 a0 ff 01:57:32.238 SMART RETURN STATUS b0 00 da 00 00 00 00 00 c2 4f 00 00 ff 01:57:32.237 SMART RETURN STATUS b0 00 da 00 00 00 00 00 c2 4f 00 00 00 01:47:40.261 SMART RETURN STATUS b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 01:47:40.238 SMART READ DATA Error 143 [2] occurred at disk power-on lifetime: 17692 hours (737 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:37:47.227 IDENTIFY DEVICE e5 00 00 00 01 00 00 00 00 00 01 a0 ff 01:37:46.887 CHECK POWER MODE e5 00 00 00 ff 00 00 00 00 00 00 00 ff 01:37:46.886 CHECK POWER MODE e5 00 00 00 00 00 00 00 00 00 00 00 00 01:37:39.695 CHECK POWER MODE b0 00 da 00 00 00 00 00 c2 4f 00 00 00 01:27:40.194 SMART RETURN STATUS Error 142 [1] occurred at disk power-on lifetime: 17536 hours (730 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:29.457 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 01 a0 ff 00:00:29.139 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 ff 00:00:29.138 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:24.059 IDENTIFY DEVICE 60 00 20 00 01 00 00 00 00 00 01 a0 ff 00:00:23.733 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 19874 - # 2 Short offline Completed without error 00% 19871 - # 3 Extended offline Completed without error 00% 15874 - # 4 Short offline Completed without error 00% 14100 - # 5 Short offline Completed without error 00% 13982 - # 6 Short offline Completed without error 00% 11163 - # 7 Short offline Completed without error 00% 9881 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 19/29 Celsius Lifetime Min/Max Temperature: 10/50 Celsius Specified Max Operating Temperature: 29 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (99) Index Estimated Time Temperature Celsius 100 2021-11-19 13:10 28 ********* ... ..( 16 skipped). .. ********* 117 2021-11-19 13:27 28 ********* 118 2021-11-19 13:28 29 ********** 119 2021-11-19 13:29 28 ********* 120 2021-11-19 13:30 29 ********** 121 2021-11-19 13:31 28 ********* ... ..( 2 skipped). .. ********* 124 2021-11-19 13:34 28 ********* 125 2021-11-19 13:35 29 ********** 126 2021-11-19 13:36 28 ********* 127 2021-11-19 13:37 28 ********* 0 2021-11-19 13:38 29 ********** 1 2021-11-19 13:39 28 ********* 2 2021-11-19 13:40 28 ********* 3 2021-11-19 13:41 29 ********** 4 2021-11-19 13:42 28 ********* 5 2021-11-19 13:43 28 ********* 6 2021-11-19 13:44 28 ********* 7 2021-11-19 13:45 29 ********** 8 2021-11-19 13:46 28 ********* 9 2021-11-19 13:47 28 ********* 10 2021-11-19 13:48 28 ********* 11 2021-11-19 13:49 29 ********** ... ..( 3 skipped). .. ********** 15 2021-11-19 13:53 29 ********** 16 2021-11-19 13:54 28 ********* ... ..( 3 skipped). .. ********* 20 2021-11-19 13:58 28 ********* 21 2021-11-19 13:59 29 ********** 22 2021-11-19 14:00 28 ********* 23 2021-11-19 14:01 28 ********* 24 2021-11-19 14:02 29 ********** 25 2021-11-19 14:03 28 ********* ... ..( 2 skipped). .. ********* 28 2021-11-19 14:06 28 ********* 29 2021-11-19 14:07 29 ********** 30 2021-11-19 14:08 28 ********* 31 2021-11-19 14:09 29 ********** 32 2021-11-19 14:10 28 ********* ... ..( 12 skipped). .. ********* 45 2021-11-19 14:23 28 ********* 46 2021-11-19 14:24 29 ********** 47 2021-11-19 14:25 28 ********* ... ..( 6 skipped). .. ********* 54 2021-11-19 14:32 28 ********* 55 2021-11-19 14:33 29 ********** 56 2021-11-19 14:34 28 ********* ... ..( 27 skipped). .. ********* 84 2021-11-19 15:02 28 ********* 85 2021-11-19 15:03 29 ********** 86 2021-11-19 15:04 29 ********** 87 2021-11-19 15:05 29 ********** 88 2021-11-19 15:06 28 ********* ... ..( 10 skipped). .. ********* 99 2021-11-19 15:17 28 ********* SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2269 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS