/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.27-generic-3rosa2021.1-x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9320325AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0003SDM1 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Feb 29 09:31:42 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 104) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 093 006 - 164550357 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7732 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 082 060 030 - 190934091 9 Power_On_Hours -O--CK 093 093 000 - 6714 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 093 093 020 - 7703 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 046 046 000 - 54 188 Command_Timeout -O--CK 100 099 000 - 5 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 073 054 045 - 27 (Min/Max 25/27) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 64 192 Power-Off_Retract_Count -O--CK 100 100 000 - 220 193 Load_Cycle_Count -O--CK 050 050 000 - 100238 194 Temperature_Celsius -O---K 027 046 000 - 27 (0 10 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 056 051 000 - 164550357 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 50 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 50 [9] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:28.853 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:28.752 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:26.487 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:26.451 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:24.111 READ FPDMA QUEUED Error 49 [8] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:26.487 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:26.451 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:24.111 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:24.064 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:21.777 READ FPDMA QUEUED Error 48 [7] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:24.111 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:24.064 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:21.777 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:21.664 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:19.391 READ FPDMA QUEUED Error 47 [6] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:21.777 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:21.664 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:19.391 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:19.232 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:16.969 READ FPDMA QUEUED Error 46 [5] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:19.391 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:19.232 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:16.969 READ FPDMA QUEUED 61 00 00 01 00 00 f2 00 42 08 d8 40 00 00:33:16.954 WRITE FPDMA QUEUED 61 00 00 01 00 00 f2 00 41 08 d8 40 00 00:33:16.954 WRITE FPDMA QUEUED Error 45 [4] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:16.969 READ FPDMA QUEUED 61 00 00 01 00 00 f2 00 42 08 d8 40 00 00:33:16.954 WRITE FPDMA QUEUED 61 00 00 01 00 00 f2 00 41 08 d8 40 00 00:33:16.954 WRITE FPDMA QUEUED 61 00 00 01 00 00 f2 00 40 08 d8 40 00 00:33:16.953 WRITE FPDMA QUEUED 61 00 00 01 00 00 f2 00 3f 08 d8 40 00 00:33:16.953 WRITE FPDMA QUEUED Error 44 [3] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:14.568 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:14.521 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:12.257 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:12.144 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:09.880 READ FPDMA QUEUED Error 43 [2] occurred at disk power-on lifetime: 4000 hours (166 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 e3 00 c9 01 99 00 00 Error: UNC at LBA = 0xe300c90199 = 974970749337 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:12.257 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:12.144 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:09.880 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 00:33:09.833 READ LOG EXT 60 00 00 01 00 00 e3 00 c8 01 c0 40 00 00:33:07.567 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 25/27 Celsius Lifetime Min/Max Temperature: 10/46 Celsius Under/Over Temperature Limit Count: 0/6 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (124) Index Estimated Time Temperature Celsius 125 2024-02-29 07:24 30 *********** ... ..( 8 skipped). .. *********** 6 2024-02-29 07:33 30 *********** 7 2024-02-29 07:34 29 ********** ... ..( 4 skipped). .. ********** 12 2024-02-29 07:39 29 ********** 13 2024-02-29 07:40 ? - 14 2024-02-29 07:41 29 ********** 15 2024-02-29 07:42 29 ********** 16 2024-02-29 07:43 28 ********* ... ..( 13 skipped). .. ********* 30 2024-02-29 07:57 28 ********* 31 2024-02-29 07:58 27 ******** ... ..( 12 skipped). .. ******** 44 2024-02-29 08:11 27 ******** 45 2024-02-29 08:12 ? - 46 2024-02-29 08:13 17 - 47 2024-02-29 08:14 18 - 48 2024-02-29 08:15 19 - 49 2024-02-29 08:16 20 * 50 2024-02-29 08:17 21 ** 51 2024-02-29 08:18 22 *** 52 2024-02-29 08:19 23 **** 53 2024-02-29 08:20 23 **** 54 2024-02-29 08:21 24 ***** 55 2024-02-29 08:22 24 ***** 56 2024-02-29 08:23 24 ***** 57 2024-02-29 08:24 25 ****** 58 2024-02-29 08:25 25 ****** 59 2024-02-29 08:26 ? - 60 2024-02-29 08:27 14 - 61 2024-02-29 08:28 15 - 62 2024-02-29 08:29 17 - 63 2024-02-29 08:30 19 - 64 2024-02-29 08:31 20 * 65 2024-02-29 08:32 21 ** 66 2024-02-29 08:33 22 *** 67 2024-02-29 08:34 23 **** 68 2024-02-29 08:35 24 ***** 69 2024-02-29 08:36 25 ****** 70 2024-02-29 08:37 25 ****** 71 2024-02-29 08:38 ? - 72 2024-02-29 08:39 26 ******* 73 2024-02-29 08:40 ? - 74 2024-02-29 08:41 26 ******* 75 2024-02-29 08:42 26 ******* 76 2024-02-29 08:43 26 ******* 77 2024-02-29 08:44 27 ******** 78 2024-02-29 08:45 27 ******** 79 2024-02-29 08:46 28 ********* 80 2024-02-29 08:47 29 ********** 81 2024-02-29 08:48 29 ********** 82 2024-02-29 08:49 30 *********** ... ..( 2 skipped). .. *********** 85 2024-02-29 08:52 30 *********** 86 2024-02-29 08:53 31 ************ 87 2024-02-29 08:54 31 ************ 88 2024-02-29 08:55 31 ************ 89 2024-02-29 08:56 32 ************* ... ..( 2 skipped). .. ************* 92 2024-02-29 08:59 32 ************* 93 2024-02-29 09:00 33 ************** ... ..( 2 skipped). .. ************** 96 2024-02-29 09:03 33 ************** 97 2024-02-29 09:04 34 *************** ... ..( 3 skipped). .. *************** 101 2024-02-29 09:08 34 *************** 102 2024-02-29 09:09 33 ************** ... ..( 3 skipped). .. ************** 106 2024-02-29 09:13 33 ************** 107 2024-02-29 09:14 32 ************* ... ..( 5 skipped). .. ************* 113 2024-02-29 09:20 32 ************* 114 2024-02-29 09:21 31 ************ ... ..( 2 skipped). .. ************ 117 2024-02-29 09:24 31 ************ 118 2024-02-29 09:25 ? - 119 2024-02-29 09:26 25 ****** 120 2024-02-29 09:27 25 ****** 121 2024-02-29 09:28 25 ****** 122 2024-02-29 09:29 26 ******* 123 2024-02-29 09:30 26 ******* 124 2024-02-29 09:31 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.27-generic-3rosa2021.1-x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7 Device Model: SAMSUNG HM320II Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AC101C4 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Feb 29 09:31:43 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5880) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 98) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance POS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3460 4 Start_Stop_Count -O--CK 096 096 000 - 4736 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate POSR-K 252 252 051 - 0 8 Seek_Time_Performance P-S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 4622 10 Spin_Retry_Count PO--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 099 099 000 - 1180 12 Power_Cycle_Count -O--CK 094 094 000 - 6568 183 Runtime_Bad_Block -O--CK 252 252 010 - 0 184 End-to-End_Error PO--CK 252 252 048 - 0 186 Unknown_Attribute -O--CK 252 252 000 - 0 187 Reported_Uncorrect -O--CK 252 252 000 - 0 188 Command_Timeout -O--CK 252 252 000 - 0 190 Airflow_Temperature_Cel -O---- 078 023 040 Past 22 (Min/Max 5/77) 191 G-Sense_Error_Rate -O---K 100 100 000 - 1804 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 090 090 000 - 101447 194 Temperature_Celsius -O---- 064 023 000 - 22 (Min/Max 5/77) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 86 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xbb GPL VS 4 Device vendor specific log 0xbc GPL VS 2 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: 21/21 Celsius Lifetime Min/Max Temperature: 12/77 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (32) Index Estimated Time Temperature Celsius 33 2024-02-28 22:55 32 ************* 34 2024-02-28 23:00 17 - 35 2024-02-28 23:05 19 - 36 2024-02-28 23:10 20 * 37 2024-02-28 23:15 22 *** 38 2024-02-28 23:20 23 **** 39 2024-02-28 23:25 24 ***** 40 2024-02-28 23:30 25 ****** 41 2024-02-28 23:35 26 ******* 42 2024-02-28 23:40 27 ******** ... ..( 4 skipped). .. ******** 47 2024-02-29 00:05 27 ******** 48 2024-02-29 00:10 29 ********** 49 2024-02-29 00:15 29 ********** 50 2024-02-29 00:20 29 ********** 51 2024-02-29 00:25 28 ********* 52 2024-02-29 00:30 27 ******** 53 2024-02-29 00:35 27 ******** 54 2024-02-29 00:40 26 ******* 55 2024-02-29 00:45 26 ******* 56 2024-02-29 00:50 27 ******** 57 2024-02-29 00:55 27 ******** 58 2024-02-29 01:00 27 ******** 59 2024-02-29 01:05 28 ********* 60 2024-02-29 01:10 28 ********* 61 2024-02-29 01:15 28 ********* 62 2024-02-29 01:20 29 ********** ... ..( 5 skipped). .. ********** 68 2024-02-29 01:50 29 ********** 69 2024-02-29 01:55 28 ********* 70 2024-02-29 02:00 28 ********* 71 2024-02-29 02:05 27 ******** ... ..( 9 skipped). .. ******** 81 2024-02-29 02:55 27 ******** 82 2024-02-29 03:00 20 * 83 2024-02-29 03:05 22 *** 84 2024-02-29 03:10 23 **** 85 2024-02-29 03:15 25 ****** 86 2024-02-29 03:20 26 ******* 87 2024-02-29 03:25 27 ******** 88 2024-02-29 03:30 17 - 89 2024-02-29 03:35 20 * 90 2024-02-29 03:40 22 *** 91 2024-02-29 03:45 23 **** 92 2024-02-29 03:50 24 ***** 93 2024-02-29 03:55 24 ***** 94 2024-02-29 04:00 25 ****** 95 2024-02-29 04:05 26 ******* 96 2024-02-29 04:10 27 ******** 97 2024-02-29 04:15 27 ******** 98 2024-02-29 04:20 28 ********* 99 2024-02-29 04:25 28 ********* 100 2024-02-29 04:30 28 ********* 101 2024-02-29 04:35 29 ********** 102 2024-02-29 04:40 28 ********* ... ..( 2 skipped). .. ********* 105 2024-02-29 04:55 28 ********* 106 2024-02-29 05:00 27 ******** ... ..( 2 skipped). .. ******** 109 2024-02-29 05:15 27 ******** 110 2024-02-29 05:20 26 ******* ... ..( 6 skipped). .. ******* 117 2024-02-29 05:55 26 ******* 118 2024-02-29 06:00 22 *** 119 2024-02-29 06:05 24 ***** 120 2024-02-29 06:10 25 ****** 121 2024-02-29 06:15 26 ******* 122 2024-02-29 06:20 27 ******** 123 2024-02-29 06:25 28 ********* 124 2024-02-29 06:30 29 ********** 125 2024-02-29 06:35 29 ********** 126 2024-02-29 06:40 29 ********** 127 2024-02-29 06:45 30 *********** 0 2024-02-29 06:50 30 *********** 1 2024-02-29 06:55 31 ************ 2 2024-02-29 07:00 30 *********** 3 2024-02-29 07:05 29 ********** 4 2024-02-29 07:10 29 ********** 5 2024-02-29 07:15 28 ********* ... ..( 2 skipped). .. ********* 8 2024-02-29 07:30 28 ********* 9 2024-02-29 07:35 29 ********** ... ..( 2 skipped). .. ********** 12 2024-02-29 07:50 29 ********** 13 2024-02-29 07:55 30 *********** 14 2024-02-29 08:00 22 *** 15 2024-02-29 08:05 25 ****** 16 2024-02-29 08:10 28 ********* 17 2024-02-29 08:15 29 ********** 18 2024-02-29 08:20 31 ************ 19 2024-02-29 08:25 32 ************* 20 2024-02-29 08:30 31 ************ 21 2024-02-29 08:35 32 ************* 22 2024-02-29 08:40 32 ************* 23 2024-02-29 08:45 32 ************* 24 2024-02-29 08:50 31 ************ 25 2024-02-29 08:55 32 ************* 26 2024-02-29 09:00 28 ********* 27 2024-02-29 09:05 29 ********** 28 2024-02-29 09:10 29 ********** 29 2024-02-29 09:15 31 ************ 30 2024-02-29 09:20 34 *************** 31 2024-02-29 09:25 34 *************** 32 2024-02-29 09:30 21 ** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific