/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.32-generic-2rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M8 (AF) Device Model: SAMSUNG HN-M500MBB Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AR10001 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Feb 18 00:02:09 2022 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 6540) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 109) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 7251 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 091 086 025 - 2860 4 Start_Stop_Count -O--CK 084 084 000 - 16434 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 16314 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 096 096 000 - 4939 12 Power_Cycle_Count -O--CK 085 085 000 - 15569 191 G-Sense_Error_Rate -O---K 099 099 000 - 18004 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 048 036 000 - 52 (Min/Max 19/64) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 096 000 - 0 198 Offline_Uncorrectable ----CK 100 096 000 - 12 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 2 200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 64002 223 Load_Retry_Count -O--CK 096 096 000 - 4939 225 Load_Cycle_Count -O--CK 058 058 000 - 428417 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1406 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1406 [5] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 07 be 50 05 40 00 Error: UNC at LBA = 0x07be5005 = 129912837 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 82 00 01 00 00 07 be 50 05 40 00 00:00:04.984 READ FPDMA QUEUED 60 00 82 00 01 00 00 07 be 50 05 40 00 00:00:05.495 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.495 SET FEATURES [Disable write cache] 60 00 02 01 00 00 00 07 be 57 05 40 00 00:00:05.495 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 56 05 40 00 00:00:05.495 READ FPDMA QUEUED Error 1405 [4] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 00 00 00 07 be 50 05 40 00 Error: UNC at LBA = 0x07be5005 = 129912837 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 be 50 05 40 00 00:00:04.894 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 50 05 40 00 00:00:05.494 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:05.494 SET FEATURES [Enable write cache] ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:00:05.494 SET FEATURES [Disable SATA feature] ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.494 SET FEATURES [Disable write cache] Error 1404 [3] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 07 be 50 04 40 00 Error: UNC at LBA = 0x07be5004 = 129912836 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 82 00 01 00 00 07 be 50 04 40 00 00:00:04.834 READ FPDMA QUEUED 60 00 82 00 01 00 00 07 be 50 04 40 00 00:00:05.344 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.344 SET FEATURES [Disable write cache] 60 00 02 01 00 00 00 07 be 57 04 40 00 00:00:05.344 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 56 04 40 00 00:00:05.344 READ FPDMA QUEUED Error 1403 [2] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 00 00 00 07 be 50 04 40 00 Error: UNC at LBA = 0x07be5004 = 129912836 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 07 be 50 04 40 00 00:00:04.744 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 50 04 40 00 00:00:05.344 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:05.344 SET FEATURES [Enable write cache] ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:00:05.344 SET FEATURES [Disable SATA feature] ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.344 SET FEATURES [Disable write cache] Error 1402 [1] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 07 be 50 03 40 00 Error: UNC at LBA = 0x07be5003 = 129912835 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 82 00 01 00 00 07 be 50 03 40 00 00:00:04.741 READ FPDMA QUEUED 60 00 82 00 01 00 00 07 be 50 03 40 00 00:00:05.194 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.194 SET FEATURES [Disable write cache] 60 00 02 01 00 00 00 07 be 57 03 40 00 00:00:05.194 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 56 03 40 00 00:00:05.194 READ FPDMA QUEUED Error 1401 [0] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 00 00 00 07 be 50 03 40 00 Error: UNC at LBA = 0x07be5003 = 129912835 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 82 01 00 00 00 07 be 50 03 40 00 00:00:04.741 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 50 03 40 00 00:00:05.194 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:05.194 SET FEATURES [Enable write cache] ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:00:05.194 SET FEATURES [Disable SATA feature] ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.194 SET FEATURES [Disable write cache] Error 1400 [7] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 07 be 50 02 40 00 Error: UNC at LBA = 0x07be5002 = 129912834 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 82 00 01 00 00 07 be 50 02 40 00 00:00:04.741 READ FPDMA QUEUED 60 00 82 00 01 00 00 07 be 50 02 40 00 00:00:05.044 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.044 SET FEATURES [Disable write cache] 60 00 02 01 00 00 00 07 be 57 02 40 00 00:00:05.044 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 56 02 40 00 00:00:05.044 READ FPDMA QUEUED Error 1399 [6] occurred at disk power-on lifetime: 16302 hours (679 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 00 00 00 07 be 50 02 40 00 Error: UNC at LBA = 0x07be5002 = 129912834 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 82 01 00 00 00 07 be 50 02 40 00 00:00:04.741 READ FPDMA QUEUED 60 00 02 01 00 00 00 07 be 50 02 40 00 00:00:05.044 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:05.044 SET FEATURES [Enable write cache] ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:00:05.044 SET FEATURES [Disable SATA feature] ef 00 82 00 00 00 00 00 00 00 00 a0 00 00:00:05.044 SET FEATURES [Disable write cache] SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 16305 - # 2 Short offline Aborted by host 60% 16305 - # 3 Short offline Aborted by host 80% 16305 - # 4 Short offline Aborted by host 90% 16157 - # 5 Short offline Completed without error 00% 16085 - # 6 Extended offline Aborted by host 90% 16085 - # 7 Short offline Completed without error 00% 16085 - # 8 Short offline Aborted by host 10% 16079 - # 9 Short offline Completed: read failure 90% 15092 340789504 #10 Short offline Completed without error 00% 14854 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Aborted_by_host [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 52 Celsius Power Cycle Min/Max Temperature: 44/53 Celsius Lifetime Min/Max Temperature: 19/68 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (113) Index Estimated Time Temperature Celsius 114 2022-02-17 13:25 52 ********************************* 115 2022-02-17 13:30 45 ************************** 116 2022-02-17 13:35 45 ************************** 117 2022-02-17 13:40 46 *************************** 118 2022-02-17 13:45 47 **************************** 119 2022-02-17 13:50 47 **************************** 120 2022-02-17 13:55 48 ***************************** 121 2022-02-17 14:00 48 ***************************** 122 2022-02-17 14:05 49 ****************************** ... ..( 2 skipped). .. ****************************** 125 2022-02-17 14:20 49 ****************************** 126 2022-02-17 14:25 50 ******************************* 127 2022-02-17 14:30 49 ****************************** ... ..( 13 skipped). .. ****************************** 13 2022-02-17 15:40 49 ****************************** 14 2022-02-17 15:45 47 **************************** 15 2022-02-17 15:50 46 *************************** 16 2022-02-17 15:55 46 *************************** 17 2022-02-17 16:00 47 **************************** 18 2022-02-17 16:05 49 ****************************** 19 2022-02-17 16:10 55 ************************************ 20 2022-02-17 16:15 51 ******************************** 21 2022-02-17 16:20 49 ****************************** 22 2022-02-17 16:25 49 ****************************** 23 2022-02-17 16:30 49 ****************************** 24 2022-02-17 16:35 43 ************************ 25 2022-02-17 16:40 43 ************************ 26 2022-02-17 16:45 45 ************************** 27 2022-02-17 16:50 45 ************************** 28 2022-02-17 16:55 49 ****************************** 29 2022-02-17 17:00 51 ******************************** 30 2022-02-17 17:05 53 ********************************** 31 2022-02-17 17:10 55 ************************************ 32 2022-02-17 17:15 54 *********************************** 33 2022-02-17 17:20 54 *********************************** 34 2022-02-17 17:25 56 ************************************* 35 2022-02-17 17:30 55 ************************************ ... ..( 2 skipped). .. ************************************ 38 2022-02-17 17:45 55 ************************************ 39 2022-02-17 17:50 56 ************************************* 40 2022-02-17 17:55 56 ************************************* 41 2022-02-17 18:00 53 ********************************** 42 2022-02-17 18:05 53 ********************************** 43 2022-02-17 18:10 55 ************************************ 44 2022-02-17 18:15 56 ************************************* 45 2022-02-17 18:20 57 ************************************** 46 2022-02-17 18:25 59 **************************************** 47 2022-02-17 18:30 61 ***************************************+ 48 2022-02-17 18:35 62 ***************************************+ 49 2022-02-17 18:40 58 *************************************** 50 2022-02-17 18:45 53 ********************************** 51 2022-02-17 18:50 49 ****************************** 52 2022-02-17 18:55 48 ***************************** 53 2022-02-17 19:00 52 ********************************* 54 2022-02-17 19:05 53 ********************************** 55 2022-02-17 19:10 52 ********************************* 56 2022-02-17 19:15 52 ********************************* 57 2022-02-17 19:20 52 ********************************* 58 2022-02-17 19:25 48 ***************************** 59 2022-02-17 19:30 49 ****************************** 60 2022-02-17 19:35 49 ****************************** 61 2022-02-17 19:40 48 ***************************** 62 2022-02-17 19:45 48 ***************************** 63 2022-02-17 19:50 47 **************************** 64 2022-02-17 19:55 47 **************************** 65 2022-02-17 20:00 47 **************************** 66 2022-02-17 20:05 46 *************************** 67 2022-02-17 20:10 46 *************************** 68 2022-02-17 20:15 47 **************************** 69 2022-02-17 20:20 47 **************************** 70 2022-02-17 20:25 48 ***************************** 71 2022-02-17 20:30 48 ***************************** 72 2022-02-17 20:35 47 **************************** 73 2022-02-17 20:40 47 **************************** 74 2022-02-17 20:45 46 *************************** 75 2022-02-17 20:50 45 ************************** ... ..( 2 skipped). .. ************************** 78 2022-02-17 21:05 45 ************************** 79 2022-02-17 21:10 44 ************************* 80 2022-02-17 21:15 43 ************************ 81 2022-02-17 21:20 43 ************************ 82 2022-02-17 21:25 42 *********************** ... ..( 3 skipped). .. *********************** 86 2022-02-17 21:45 42 *********************** 87 2022-02-17 21:50 43 ************************ 88 2022-02-17 21:55 43 ************************ 89 2022-02-17 22:00 43 ************************ 90 2022-02-17 22:05 42 *********************** 91 2022-02-17 22:10 42 *********************** 92 2022-02-17 22:15 42 *********************** 93 2022-02-17 22:20 43 ************************ 94 2022-02-17 22:25 43 ************************ 95 2022-02-17 22:30 43 ************************ 96 2022-02-17 22:35 42 *********************** 97 2022-02-17 22:40 43 ************************ 98 2022-02-17 22:45 39 ******************** 99 2022-02-17 22:50 41 ********************** 100 2022-02-17 22:55 47 **************************** 101 2022-02-17 23:00 49 ****************************** 102 2022-02-17 23:05 50 ******************************* 103 2022-02-17 23:10 51 ******************************** 104 2022-02-17 23:15 52 ********************************* 105 2022-02-17 23:20 53 ********************************** ... ..( 4 skipped). .. ********************************** 110 2022-02-17 23:45 53 ********************************** 111 2022-02-17 23:50 52 ********************************* 112 2022-02-17 23:55 51 ******************************** 113 2022-02-18 00:00 52 ********************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1069 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific