/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.42-1-MANJARO] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar Z5K1000 Device Model: HGST HTS541010A7E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: SE0OA4H0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jul 4 23:01:19 2021 -05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 224) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 145 145 033 - 1 4 Start_Stop_Count -O--C- 096 096 000 - 6455 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 074 074 000 - 11407 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2685 191 G-Sense_Error_Rate -O-R-- 097 097 000 - 65542 192 Power-Off_Retract_Count -O--CK 100 100 000 - 115 193 Load_Cycle_Count -O--C- 094 094 000 - 66827 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 19/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/34 Celsius Lifetime Min/Max Temperature: 19/42 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (75) Index Estimated Time Temperature Celsius 76 2021-07-04 20:54 40 ********************* 77 2021-07-04 20:55 39 ******************** 78 2021-07-04 20:56 40 ********************* 79 2021-07-04 20:57 39 ******************** 80 2021-07-04 20:58 40 ********************* 81 2021-07-04 20:59 39 ******************** ... ..( 19 skipped). .. ******************** 101 2021-07-04 21:19 39 ******************** 102 2021-07-04 21:20 38 ******************* ... ..( 13 skipped). .. ******************* 116 2021-07-04 21:34 38 ******************* 117 2021-07-04 21:35 39 ******************** 118 2021-07-04 21:36 38 ******************* 119 2021-07-04 21:37 39 ******************** 120 2021-07-04 21:38 39 ******************** 121 2021-07-04 21:39 39 ******************** 122 2021-07-04 21:40 38 ******************* 123 2021-07-04 21:41 39 ******************** 124 2021-07-04 21:42 39 ******************** 125 2021-07-04 21:43 38 ******************* 126 2021-07-04 21:44 39 ******************** ... ..( 16 skipped). .. ******************** 15 2021-07-04 22:01 39 ******************** 16 2021-07-04 22:02 38 ******************* 17 2021-07-04 22:03 39 ******************** 18 2021-07-04 22:04 38 ******************* ... ..( 13 skipped). .. ******************* 32 2021-07-04 22:18 38 ******************* 33 2021-07-04 22:19 ? - 34 2021-07-04 22:20 27 ******** 35 2021-07-04 22:21 27 ******** 36 2021-07-04 22:22 29 ********** 37 2021-07-04 22:23 29 ********** 38 2021-07-04 22:24 30 *********** ... ..( 4 skipped). .. *********** 43 2021-07-04 22:29 30 *********** 44 2021-07-04 22:30 31 ************ ... ..( 4 skipped). .. ************ 49 2021-07-04 22:35 31 ************ 50 2021-07-04 22:36 ? - 51 2021-07-04 22:37 32 ************* 52 2021-07-04 22:38 32 ************* 53 2021-07-04 22:39 33 ************** 54 2021-07-04 22:40 33 ************** 55 2021-07-04 22:41 ? - 56 2021-07-04 22:42 33 ************** 57 2021-07-04 22:43 34 *************** ... ..( 17 skipped). .. *************** 75 2021-07-04 23:01 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 40524 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS