/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7E (AF) Device Model: SAMSUNG HM321HI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AJ10002 User Capacity: 320 072 933 376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Oct 15 16:09:56 2015 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4800) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 17 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3408 4 Start_Stop_Count -O--CK 097 097 000 - 3747 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 8294 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 098 098 000 - 2780 12 Power_Cycle_Count -O--CK 099 099 000 - 1853 191 G-Sense_Error_Rate -O---K 087 087 000 - 140590 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 036 000 - 26 (Min/Max 8/64) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 5947 223 Load_Retry_Count -O--CK 098 098 000 - 2780 225 Load_Cycle_Count -O--CK 076 076 000 - 247910 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 23/26 Celsius Lifetime Min/Max Temperature: 8/68 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (12) Index Estimated Time Temperature Celsius 13 2015-10-15 05:30 26 ******* 14 2015-10-15 05:35 40 ********************* 15 2015-10-15 05:40 41 ********************** 16 2015-10-15 05:45 40 ********************* ... ..( 11 skipped). .. ********************* 28 2015-10-15 06:45 40 ********************* 29 2015-10-15 06:50 41 ********************** 30 2015-10-15 06:55 41 ********************** 31 2015-10-15 07:00 42 *********************** ... ..( 2 skipped). .. *********************** 34 2015-10-15 07:15 42 *********************** 35 2015-10-15 07:20 41 ********************** 36 2015-10-15 07:25 41 ********************** 37 2015-10-15 07:30 40 ********************* 38 2015-10-15 07:35 41 ********************** 39 2015-10-15 07:40 40 ********************* ... ..( 7 skipped). .. ********************* 47 2015-10-15 08:20 40 ********************* 48 2015-10-15 08:25 39 ******************** 49 2015-10-15 08:30 38 ******************* ... ..( 11 skipped). .. ******************* 61 2015-10-15 09:30 38 ******************* 62 2015-10-15 09:35 37 ****************** 63 2015-10-15 09:40 36 ***************** 64 2015-10-15 09:45 36 ***************** 65 2015-10-15 09:50 37 ****************** ... ..( 6 skipped). .. ****************** 72 2015-10-15 10:25 37 ****************** 73 2015-10-15 10:30 24 ***** 74 2015-10-15 10:35 28 ********* 75 2015-10-15 10:40 31 ************ 76 2015-10-15 10:45 32 ************* 77 2015-10-15 10:50 33 ************** 78 2015-10-15 10:55 30 *********** 79 2015-10-15 11:00 32 ************* 80 2015-10-15 11:05 34 *************** 81 2015-10-15 11:10 35 **************** 82 2015-10-15 11:15 36 ***************** 83 2015-10-15 11:20 28 ********* 84 2015-10-15 11:25 31 ************ 85 2015-10-15 11:30 33 ************** 86 2015-10-15 11:35 34 *************** 87 2015-10-15 11:40 35 **************** 88 2015-10-15 11:45 30 *********** 89 2015-10-15 11:50 34 *************** 90 2015-10-15 11:55 36 ***************** 91 2015-10-15 12:00 37 ****************** 92 2015-10-15 12:05 38 ******************* ... ..( 3 skipped). .. ******************* 96 2015-10-15 12:25 38 ******************* 97 2015-10-15 12:30 37 ****************** 98 2015-10-15 12:35 39 ******************** 99 2015-10-15 12:40 40 ********************* 100 2015-10-15 12:45 40 ********************* 101 2015-10-15 12:50 40 ********************* 102 2015-10-15 12:55 39 ******************** 103 2015-10-15 13:00 38 ******************* 104 2015-10-15 13:05 39 ******************** 105 2015-10-15 13:10 39 ******************** 106 2015-10-15 13:15 38 ******************* 107 2015-10-15 13:20 38 ******************* 108 2015-10-15 13:25 38 ******************* 109 2015-10-15 13:30 39 ******************** 110 2015-10-15 13:35 38 ******************* 111 2015-10-15 13:40 38 ******************* 112 2015-10-15 13:45 39 ******************** 113 2015-10-15 13:50 38 ******************* ... ..( 26 skipped). .. ******************* 12 2015-10-15 16:05 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific