Probe #a1cbd188ab of HPE ProLiant DL360 Gen10

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.4-2-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: VK001920GWSRU Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: HPG2 User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 26 09:54:43 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 002 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 9 Power_On_Hours -O--CK 090 090 000 - 45727 173 Unknown_Attribute PO--CK 098 098 005 - 106 175 Program_Fail_Count_Chip PO--CK 100 100 001 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 200 200 097 - 0 194 Temperature_Celsius -O---K 085 078 000 - 15 196 Reallocated_Event_Count PO--CK 100 100 005 - 0 202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 1 Pending Defects log 0x0d GPL R/O 1 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL R/O 9 IDENTIFY DEVICE data log 0x80 GPL R/W 16 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xb5 SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xbb GPL VS 1 Device vendor specific log 0xd0 GPL VS 1 Device vendor specific log 0xd7 GPL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 15 Celsius Power Cycle Min/Max Temperature: 3/17 Celsius Lifetime Min/Max Temperature: 3/22 Celsius Specified Max Operating Temperature: 60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2025-03-25 12:40 26 ******* 76 2025-03-25 12:50 26 ******* 77 2025-03-25 13:00 27 ******** 78 2025-03-25 13:10 27 ******** 79 2025-03-25 13:20 26 ******* ... ..( 10 skipped). .. ******* 90 2025-03-25 15:10 26 ******* 91 2025-03-25 15:20 27 ******** 92 2025-03-25 15:30 27 ******** 93 2025-03-25 15:40 26 ******* ... ..( 4 skipped). .. ******* 98 2025-03-25 16:30 26 ******* 99 2025-03-25 16:40 27 ******** 100 2025-03-25 16:50 26 ******* 101 2025-03-25 17:00 26 ******* 102 2025-03-25 17:10 26 ******* 103 2025-03-25 17:20 27 ******** 104 2025-03-25 17:30 26 ******* ... ..( 44 skipped). .. ******* 21 2025-03-26 01:00 26 ******* 22 2025-03-26 01:10 27 ******** ... ..( 2 skipped). .. ******** 25 2025-03-26 01:40 27 ******** 26 2025-03-26 01:50 28 ********* 27 2025-03-26 02:00 28 ********* 28 2025-03-26 02:10 28 ********* 29 2025-03-26 02:20 26 ******* ... ..( 6 skipped). .. ******* 36 2025-03-26 03:30 26 ******* 37 2025-03-26 03:40 27 ******** 38 2025-03-26 03:50 26 ******* ... ..( 24 skipped). .. ******* 63 2025-03-26 08:00 26 ******* 64 2025-03-26 08:10 27 ******** 65 2025-03-26 08:20 26 ******* ... ..( 2 skipped). .. ******* 68 2025-03-26 08:50 26 ******* 69 2025-03-26 09:00 27 ******** 70 2025-03-26 09:10 26 ******* 71 2025-03-26 09:20 27 ******** ... ..( 2 skipped). .. ******** 74 2025-03-26 09:50 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 24 --- Lifetime Power-On Resets 0x01 0x010 4 45727 --- Power-on Hours 0x01 0x018 6 173378720582 --- Logical Sectors Written 0x01 0x020 6 4942302498 --- Number of Write Commands 0x01 0x028 6 381010092830 --- Logical Sectors Read 0x01 0x030 6 3028805402 --- Number of Read Commands 0x01 0x038 6 1139000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 15 --- Current Temperature 0x05 0x020 1 22 --- Highest Temperature 0x05 0x028 1 3 --- Lowest Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 122 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.4-2-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: VK001920GWSRU Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: HPG2 User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 26 09:54:43 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 002 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 9 Power_On_Hours -O--CK 090 090 000 - 45727 173 Unknown_Attribute PO--CK 098 098 005 - 106 175 Program_Fail_Count_Chip PO--CK 100 100 001 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 200 200 097 - 0 194 Temperature_Celsius -O---K 085 077 000 - 15 196 Reallocated_Event_Count PO--CK 100 100 005 - 0 202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 1 Pending Defects log 0x0d GPL R/O 1 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL R/O 9 IDENTIFY DEVICE data log 0x80 GPL R/W 16 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xb5 SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xbb GPL VS 1 Device vendor specific log 0xd0 GPL VS 1 Device vendor specific log 0xd7 GPL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 15 Celsius Power Cycle Min/Max Temperature: 3/18 Celsius Lifetime Min/Max Temperature: 3/22 Celsius Specified Max Operating Temperature: 60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2025-03-25 12:40 27 ******** ... ..( 7 skipped). .. ******** 83 2025-03-25 14:00 27 ******** 84 2025-03-25 14:10 26 ******* ... ..( 2 skipped). .. ******* 87 2025-03-25 14:40 26 ******* 88 2025-03-25 14:50 27 ******** ... ..( 6 skipped). .. ******** 95 2025-03-25 16:00 27 ******** 96 2025-03-25 16:10 26 ******* 97 2025-03-25 16:20 27 ******** ... ..( 25 skipped). .. ******** 123 2025-03-25 20:40 27 ******** 124 2025-03-25 20:50 26 ******* 125 2025-03-25 21:00 27 ******** ... ..( 5 skipped). .. ******** 3 2025-03-25 22:00 27 ******** 4 2025-03-25 22:10 26 ******* 5 2025-03-25 22:20 26 ******* 6 2025-03-25 22:30 26 ******* 7 2025-03-25 22:40 27 ******** 8 2025-03-25 22:50 27 ******** 9 2025-03-25 23:00 26 ******* 10 2025-03-25 23:10 26 ******* 11 2025-03-25 23:20 27 ******** 12 2025-03-25 23:30 27 ******** 13 2025-03-25 23:40 27 ******** 14 2025-03-25 23:50 26 ******* 15 2025-03-26 00:00 26 ******* 16 2025-03-26 00:10 27 ******** 17 2025-03-26 00:20 27 ******** 18 2025-03-26 00:30 27 ******** 19 2025-03-26 00:40 26 ******* 20 2025-03-26 00:50 27 ******** 21 2025-03-26 01:00 27 ******** 22 2025-03-26 01:10 27 ******** 23 2025-03-26 01:20 28 ********* 24 2025-03-26 01:30 27 ******** 25 2025-03-26 01:40 27 ******** 26 2025-03-26 01:50 28 ********* 27 2025-03-26 02:00 28 ********* 28 2025-03-26 02:10 28 ********* 29 2025-03-26 02:20 27 ******** ... ..( 2 skipped). .. ******** 32 2025-03-26 02:50 27 ******** 33 2025-03-26 03:00 26 ******* 34 2025-03-26 03:10 27 ******** ... ..( 6 skipped). .. ******** 41 2025-03-26 04:20 27 ******** 42 2025-03-26 04:30 26 ******* 43 2025-03-26 04:40 26 ******* 44 2025-03-26 04:50 26 ******* 45 2025-03-26 05:00 27 ******** 46 2025-03-26 05:10 26 ******* ... ..( 2 skipped). .. ******* 49 2025-03-26 05:40 26 ******* 50 2025-03-26 05:50 27 ******** 51 2025-03-26 06:00 26 ******* ... ..( 2 skipped). .. ******* 54 2025-03-26 06:30 26 ******* 55 2025-03-26 06:40 27 ******** 56 2025-03-26 06:50 26 ******* ... ..( 5 skipped). .. ******* 62 2025-03-26 07:50 26 ******* 63 2025-03-26 08:00 27 ******** ... ..( 4 skipped). .. ******** 68 2025-03-26 08:50 27 ******** 69 2025-03-26 09:00 26 ******* 70 2025-03-26 09:10 27 ******** ... ..( 3 skipped). .. ******** 74 2025-03-26 09:50 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 24 --- Lifetime Power-On Resets 0x01 0x010 4 45727 --- Power-on Hours 0x01 0x018 6 173378494408 --- Logical Sectors Written 0x01 0x020 6 4932018738 --- Number of Write Commands 0x01 0x028 6 380765230311 --- Logical Sectors Read 0x01 0x030 6 3067405654 --- Number of Read Commands 0x01 0x038 6 2052000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 15 --- Current Temperature 0x05 0x020 1 22 --- Highest Temperature 0x05 0x028 1 3 --- Lowest Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 122 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.4-2-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: VK001920GWSRU Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: HPG2 User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 26 09:54:43 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 002 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 9 Power_On_Hours -O--CK 090 090 000 - 45727 173 Unknown_Attribute PO--CK 098 098 005 - 104 175 Program_Fail_Count_Chip PO--CK 100 100 001 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 200 200 097 - 0 194 Temperature_Celsius -O---K 085 074 000 - 15 196 Reallocated_Event_Count PO--CK 100 100 005 - 0 202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 1 Pending Defects log 0x0d GPL R/O 1 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL R/O 9 IDENTIFY DEVICE data log 0x80 GPL R/W 16 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xb5 SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xbb GPL VS 1 Device vendor specific log 0xd0 GPL VS 1 Device vendor specific log 0xd7 GPL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 15 Celsius Power Cycle Min/Max Temperature: 4/18 Celsius Lifetime Min/Max Temperature: 4/25 Celsius Specified Max Operating Temperature: 60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2025-03-25 12:40 27 ******** ... ..( 7 skipped). .. ******** 83 2025-03-25 14:00 27 ******** 84 2025-03-25 14:10 26 ******* 85 2025-03-25 14:20 26 ******* 86 2025-03-25 14:30 26 ******* 87 2025-03-25 14:40 27 ******** ... ..( 53 skipped). .. ******** 13 2025-03-25 23:40 27 ******** 14 2025-03-25 23:50 26 ******* 15 2025-03-26 00:00 27 ******** ... ..( 5 skipped). .. ******** 21 2025-03-26 01:00 27 ******** 22 2025-03-26 01:10 28 ********* ... ..( 5 skipped). .. ********* 28 2025-03-26 02:10 28 ********* 29 2025-03-26 02:20 27 ******** ... ..( 14 skipped). .. ******** 44 2025-03-26 04:50 27 ******** 45 2025-03-26 05:00 26 ******* 46 2025-03-26 05:10 27 ******** ... ..( 2 skipped). .. ******** 49 2025-03-26 05:40 27 ******** 50 2025-03-26 05:50 26 ******* ... ..( 5 skipped). .. ******* 56 2025-03-26 06:50 26 ******* 57 2025-03-26 07:00 27 ******** 58 2025-03-26 07:10 26 ******* 59 2025-03-26 07:20 26 ******* 60 2025-03-26 07:30 27 ******** 61 2025-03-26 07:40 26 ******* 62 2025-03-26 07:50 26 ******* 63 2025-03-26 08:00 27 ******** 64 2025-03-26 08:10 27 ******** 65 2025-03-26 08:20 26 ******* 66 2025-03-26 08:30 27 ******** ... ..( 7 skipped). .. ******** 74 2025-03-26 09:50 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 25 --- Lifetime Power-On Resets 0x01 0x010 4 45727 --- Power-on Hours 0x01 0x018 6 169979721423 --- Logical Sectors Written 0x01 0x020 6 4740489698 --- Number of Write Commands 0x01 0x028 6 380565520287 --- Logical Sectors Read 0x01 0x030 6 3026164023 --- Number of Read Commands 0x01 0x038 6 1360000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 15 --- Current Temperature 0x05 0x020 1 25 --- Highest Temperature 0x05 0x028 1 4 --- Lowest Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 122 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.4-2-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: VK001920GWSRU Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: HPG2 User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 26 09:54:43 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 002 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 9 Power_On_Hours -O--CK 090 090 000 - 45727 173 Unknown_Attribute PO--CK 098 098 005 - 104 175 Program_Fail_Count_Chip PO--CK 100 100 001 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO-RCK 200 200 097 - 0 194 Temperature_Celsius -O---K 085 076 000 - 15 196 Reallocated_Event_Count PO--CK 100 100 005 - 0 202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 1 Pending Defects log 0x0d GPL R/O 1 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL R/O 9 IDENTIFY DEVICE data log 0x80 GPL R/W 16 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xb5 SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xbb GPL VS 1 Device vendor specific log 0xd0 GPL VS 1 Device vendor specific log 0xd7 GPL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 15 Celsius Power Cycle Min/Max Temperature: 3/17 Celsius Lifetime Min/Max Temperature: 3/24 Celsius Specified Max Operating Temperature: 60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2025-03-25 12:40 27 ******** ... ..( 7 skipped). .. ******** 83 2025-03-25 14:00 27 ******** 84 2025-03-25 14:10 26 ******* ... ..( 2 skipped). .. ******* 87 2025-03-25 14:40 26 ******* 88 2025-03-25 14:50 27 ******** ... ..( 27 skipped). .. ******** 116 2025-03-25 19:30 27 ******** 117 2025-03-25 19:40 26 ******* 118 2025-03-25 19:50 27 ******** 119 2025-03-25 20:00 27 ******** 120 2025-03-25 20:10 27 ******** 121 2025-03-25 20:20 26 ******* 122 2025-03-25 20:30 27 ******** 123 2025-03-25 20:40 27 ******** 124 2025-03-25 20:50 26 ******* 125 2025-03-25 21:00 26 ******* 126 2025-03-25 21:10 27 ******** 127 2025-03-25 21:20 27 ******** 0 2025-03-25 21:30 26 ******* 1 2025-03-25 21:40 27 ******** 2 2025-03-25 21:50 27 ******** 3 2025-03-25 22:00 26 ******* ... ..( 2 skipped). .. ******* 6 2025-03-25 22:30 26 ******* 7 2025-03-25 22:40 27 ******** ... ..( 2 skipped). .. ******** 10 2025-03-25 23:10 27 ******** 11 2025-03-25 23:20 26 ******* 12 2025-03-25 23:30 26 ******* 13 2025-03-25 23:40 27 ******** 14 2025-03-25 23:50 26 ******* 15 2025-03-26 00:00 26 ******* 16 2025-03-26 00:10 27 ******** 17 2025-03-26 00:20 27 ******** 18 2025-03-26 00:30 26 ******* 19 2025-03-26 00:40 27 ******** ... ..( 6 skipped). .. ******** 26 2025-03-26 01:50 27 ******** 27 2025-03-26 02:00 28 ********* 28 2025-03-26 02:10 28 ********* 29 2025-03-26 02:20 27 ******** ... ..( 3 skipped). .. ******** 33 2025-03-26 03:00 27 ******** 34 2025-03-26 03:10 26 ******* 35 2025-03-26 03:20 27 ******** ... ..( 5 skipped). .. ******** 41 2025-03-26 04:20 27 ******** 42 2025-03-26 04:30 26 ******* 43 2025-03-26 04:40 26 ******* 44 2025-03-26 04:50 27 ******** 45 2025-03-26 05:00 27 ******** 46 2025-03-26 05:10 27 ******** 47 2025-03-26 05:20 26 ******* 48 2025-03-26 05:30 27 ******** 49 2025-03-26 05:40 26 ******* ... ..( 11 skipped). .. ******* 61 2025-03-26 07:40 26 ******* 62 2025-03-26 07:50 27 ******** ... ..( 2 skipped). .. ******** 65 2025-03-26 08:20 27 ******** 66 2025-03-26 08:30 26 ******* 67 2025-03-26 08:40 27 ******** ... ..( 6 skipped). .. ******** 74 2025-03-26 09:50 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 24 --- Lifetime Power-On Resets 0x01 0x010 4 45727 --- Power-on Hours 0x01 0x018 6 169979723027 --- Logical Sectors Written 0x01 0x020 6 4730554748 --- Number of Write Commands 0x01 0x028 6 380656479671 --- Logical Sectors Read 0x01 0x030 6 3037487005 --- Number of Read Commands 0x01 0x038 6 1220000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 15 --- Current Temperature 0x05 0x020 1 24 --- Highest Temperature 0x05 0x028 1 3 --- Lowest Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 122 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description


Hardware for Linux and BSD

GitHub