/dev/sda smartctl 7.2 2021-01-17 r5171 [x86_64-linux-5.11.19-300.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 840 EVO 120GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXT0DB6Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat May 15 01:33:40 2021 AEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4200) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 70) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 9384 12 Power_Cycle_Count -O--CK 099 099 000 - 993 177 Wear_Leveling_Count PO--C- 093 093 000 - 79 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 001 010 Past 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 064 045 000 - 36 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 099 099 000 - 2 235 POR_Recovery_Count -O--C- 099 099 000 - 141 241 Total_LBAs_Written -O--CK 099 099 000 - 18561819682 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xde SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1 - # 2 Extended offline Completed without error 00% 3 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/56195 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (20) Index Estimated Time Temperature Celsius 21 2021-05-14 04:20 ? - ... ..(106 skipped). .. - 0 2021-05-14 22:10 ? - 1 2021-05-14 22:20 35 **************** 2 2021-05-14 22:30 35 **************** 3 2021-05-14 22:40 34 *************** 4 2021-05-14 22:50 33 ************** 5 2021-05-14 23:00 33 ************** 6 2021-05-14 23:10 34 *************** 7 2021-05-14 23:20 34 *************** 8 2021-05-14 23:30 33 ************** 9 2021-05-14 23:40 33 ************** 10 2021-05-14 23:50 32 ************* 11 2021-05-15 00:00 32 ************* 12 2021-05-15 00:10 32 ************* 13 2021-05-15 00:20 34 *************** 14 2021-05-15 00:30 35 **************** 15 2021-05-15 00:40 35 **************** 16 2021-05-15 00:50 35 **************** 17 2021-05-15 01:00 36 ***************** ... ..( 2 skipped). .. ***************** 20 2021-05-15 01:30 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 31 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 31 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2021-01-17 r5171 [x86_64-linux-5.11.19-300.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M5 Device Model: SAMSUNG HM160HI Serial Number: -- LU WWN Device Id: 5 0f0000 ... Firmware Version: HR100-08 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0 SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Sat May 15 01:33:40 2021 AEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 32) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 64) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 2 3 Spin_Up_Time POS--- 252 252 025 - 1750 4 Start_Stop_Count -O--CK 098 098 000 - 2876 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-- 252 252 051 - 309002240 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 001 001 000 - 10827746 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 252 100 000 - 1382 191 G-Sense_Error_Rate -O--CK 100 100 000 - 674 192 Power-Off_Retract_Count -O--CK 100 100 000 - 237 194 Temperature_Celsius -O---K 130 085 000 - 36 (Min/Max 14/51) 195 Hardware_ECC_Recovered -O-RC- 100 001 000 - 15363 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--C- 252 089 000 - 103 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 256 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O--CK 252 252 000 - 0 223 Load_Retry_Count -O--CK 002 002 000 - 99999 225 Load_Cycle_Count -O--CK 002 002 000 - 999999 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x08 SL R/O 1 Power Conditions log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80 GPL,SL R/W 16 Host vendor specific log 0x81-0x9f SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 55608 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. ATA_READ_LOG_EXT (addr=0x03:0x00, page=1, n=1) failed: scsi error badly formed scsi parameters SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 11120 - # 2 Short offline Completed without error 00% 11119 - # 3 Extended offline Completed without error 00% 11100 - # 4 Extended offline Aborted by host 150% 11095 - # 5 Extended offline Aborted by host 150% 10612 - # 6 Extended offline Completed without error 00% 10545 - # 7 Extended offline Completed without error 00% 2131 - # 8 Extended offline Completed without error 00% 869 - # 9 Offline Completed without error 00% 65387 - #10 Extended offline Completed without error 00% 65386 - #11 Offline Interrupted (host reset) 00% 65385 - #12 Offline Interrupted (host reset) 00% 65385 - #13 Offline Interrupted (host reset) 00% 65385 - #14 Offline Interrupted (host reset) 00% 65385 - #15 Offline Interrupted (host reset) 00% 18193 - #16 Extended offline Completed without error 00% 24176 - #17 Extended offline Completed without error 00% 14521 - #18 Extended offline Completed without error 00% 14199 - #19 Extended offline Completed without error 00% 14110 - #20 Extended offline Completed: read failure 00% 14108 42563333 #21 Vendor (0x4d) Completed: electrical failure 110% 16832 811498809 2 of 2 failed self-tests are outdated by newer successful extended offline self-test # 1 SMART Selective self-test log data structure revision number 4884 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 524310939 Interrupted [00% left] (0-65535) 2 1103106923 17792 Not_testing 3 17792 3305177088 Not_testing 4 1098973184 34017 Not_testing 5 526909440 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 33/40 Celsius Lifetime Min/Max Temperature: 14/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 15/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (95) Index Estimated Time Temperature Celsius 96 2021-05-14 23:26 34 *************** ... ..( 22 skipped). .. *************** 119 2021-05-14 23:49 34 *************** 120 2021-05-14 23:50 33 ************** 121 2021-05-14 23:51 33 ************** 122 2021-05-14 23:52 34 *************** 123 2021-05-14 23:53 33 ************** 124 2021-05-14 23:54 33 ************** 125 2021-05-14 23:55 33 ************** 126 2021-05-14 23:56 34 *************** 127 2021-05-14 23:57 33 ************** ... ..( 7 skipped). .. ************** 7 2021-05-15 00:05 33 ************** 8 2021-05-15 00:06 34 *************** 9 2021-05-15 00:07 33 ************** 10 2021-05-15 00:08 34 *************** ... ..( 9 skipped). .. *************** 20 2021-05-15 00:18 34 *************** 21 2021-05-15 00:19 35 **************** ... ..( 7 skipped). .. **************** 29 2021-05-15 00:27 35 **************** 30 2021-05-15 00:28 37 ****************** ... ..( 5 skipped). .. ****************** 36 2021-05-15 00:34 37 ****************** 37 2021-05-15 00:35 36 ***************** ... ..( 13 skipped). .. ***************** 51 2021-05-15 00:49 36 ***************** 52 2021-05-15 00:50 37 ****************** ... ..( 2 skipped). .. ****************** 55 2021-05-15 00:53 37 ****************** 56 2021-05-15 00:54 36 ***************** ... ..( 4 skipped). .. ***************** 61 2021-05-15 00:59 36 ***************** 62 2021-05-15 01:00 37 ****************** ... ..( 20 skipped). .. ****************** 83 2021-05-15 01:21 37 ****************** 84 2021-05-15 01:22 36 ***************** 85 2021-05-15 01:23 37 ****************** 86 2021-05-15 01:24 36 ***************** 87 2021-05-15 01:25 36 ***************** 88 2021-05-15 01:26 37 ****************** ... ..( 3 skipped). .. ****************** 92 2021-05-15 01:30 37 ****************** 93 2021-05-15 01:31 36 ***************** 94 2021-05-15 01:32 36 ***************** 95 2021-05-15 01:33 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 26 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific