/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.2 (SATA 6Gb/s) Device Model: ST32000645NS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0004 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jul 10 17:29:55 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 298) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 063 044 - 80100833 3 Spin_Up_Time PO---- 094 094 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 161 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 083 060 030 - 13643891553 9 Power_On_Hours -O--CK 085 011 000 - 13951 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 161 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 4295032833 189 High_Fly_Writes -O-RCK 064 064 000 - 36 190 Airflow_Temperature_Cel -O---K 065 033 045 Past 35 (Min/Max 32/40 #998) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 148 193 Load_Cycle_Count -O--CK 100 100 000 - 162 194 Temperature_Celsius -O---K 035 067 000 - 35 (0 19 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 030 003 000 - 80100833 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 32/40 Celsius Lifetime Min/Max Temperature: 19/67 Celsius Under/Over Temperature Limit Count: 0/865 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (8) Index Estimated Time Temperature Celsius 9 2025-07-09 20:10 35 **************** 10 2025-07-09 20:20 36 ***************** 11 2025-07-09 20:30 36 ***************** 12 2025-07-09 20:40 35 **************** 13 2025-07-09 20:50 36 ***************** ... ..( 14 skipped). .. ***************** 28 2025-07-09 23:20 36 ***************** 29 2025-07-09 23:30 35 **************** ... ..( 4 skipped). .. **************** 34 2025-07-10 00:20 35 **************** 35 2025-07-10 00:30 34 *************** 36 2025-07-10 00:40 34 *************** 37 2025-07-10 00:50 34 *************** 38 2025-07-10 01:00 37 ****************** 39 2025-07-10 01:10 38 ******************* 40 2025-07-10 01:20 38 ******************* 41 2025-07-10 01:30 38 ******************* 42 2025-07-10 01:40 36 ***************** 43 2025-07-10 01:50 35 **************** 44 2025-07-10 02:00 37 ****************** 45 2025-07-10 02:10 38 ******************* ... ..( 2 skipped). .. ******************* 48 2025-07-10 02:40 38 ******************* 49 2025-07-10 02:50 36 ***************** 50 2025-07-10 03:00 37 ****************** 51 2025-07-10 03:10 38 ******************* ... ..( 26 skipped). .. ******************* 78 2025-07-10 07:40 38 ******************* 79 2025-07-10 07:50 37 ****************** ... ..( 2 skipped). .. ****************** 82 2025-07-10 08:20 37 ****************** 83 2025-07-10 08:30 36 ***************** 84 2025-07-10 08:40 36 ***************** 85 2025-07-10 08:50 35 **************** 86 2025-07-10 09:00 34 *************** 87 2025-07-10 09:10 35 **************** 88 2025-07-10 09:20 35 **************** 89 2025-07-10 09:30 36 ***************** 90 2025-07-10 09:40 36 ***************** 91 2025-07-10 09:50 37 ****************** 92 2025-07-10 10:00 37 ****************** 93 2025-07-10 10:10 36 ***************** 94 2025-07-10 10:20 35 **************** 95 2025-07-10 10:30 35 **************** 96 2025-07-10 10:40 35 **************** 97 2025-07-10 10:50 34 *************** ... ..( 2 skipped). .. *************** 100 2025-07-10 11:20 34 *************** 101 2025-07-10 11:30 35 **************** 102 2025-07-10 11:40 35 **************** 103 2025-07-10 11:50 34 *************** ... ..( 4 skipped). .. *************** 108 2025-07-10 12:40 34 *************** 109 2025-07-10 12:50 35 **************** ... ..( 8 skipped). .. **************** 118 2025-07-10 14:20 35 **************** 119 2025-07-10 14:30 37 ****************** 120 2025-07-10 14:40 38 ******************* ... ..( 4 skipped). .. ******************* 125 2025-07-10 15:30 38 ******************* 126 2025-07-10 15:40 37 ****************** 127 2025-07-10 15:50 37 ****************** 0 2025-07-10 16:00 36 ***************** 1 2025-07-10 16:10 35 **************** 2 2025-07-10 16:20 34 *************** ... ..( 2 skipped). .. *************** 5 2025-07-10 16:50 34 *************** 6 2025-07-10 17:00 35 **************** 7 2025-07-10 17:10 35 **************** 8 2025-07-10 17:20 35 **************** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD20EFRX-68EUZN0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jul 10 17:29:55 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (25200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 177 173 021 - 4141 4 Start_Stop_Count -O--CK 100 100 000 - 466 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 002 002 000 - 71710 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 465 192 Power-Off_Retract_Count -O--CK 200 200 000 - 446 193 Load_Cycle_Count -O--CK 200 200 000 - 19 194 Temperature_Celsius -O---K 116 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 358 hours (14 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 c8 1d 3c 68 40 00 Error: UNC at LBA = 0xc81d3c68 = 3357359208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 48 00 00 7c 4d 66 e8 40 08 29d+09:51:36.914 READ FPDMA QUEUED 60 00 10 00 28 00 00 7c 41 df a0 40 08 29d+09:51:36.903 READ FPDMA QUEUED 60 00 18 00 f0 00 00 68 d0 54 08 40 08 29d+09:51:36.902 READ FPDMA QUEUED 60 00 10 00 40 00 00 7c 36 a5 18 40 08 29d+09:51:36.895 READ FPDMA QUEUED 60 00 18 00 38 00 00 7c 1d 39 08 40 08 29d+09:51:36.894 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 358 hours (14 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b5 7d 78 d0 40 00 Error: WP at LBA = 0xb57d78d0 = 3044899024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 00 00 00 01 6e c2 c8 40 08 29d+09:36:55.615 WRITE FPDMA QUEUED 61 00 18 00 f8 00 00 01 59 10 a0 40 08 29d+09:36:55.615 WRITE FPDMA QUEUED 61 01 20 00 c0 00 00 7b e2 4a 00 40 08 29d+09:36:55.615 WRITE FPDMA QUEUED 61 02 e8 00 b8 00 00 cc 67 41 20 40 08 29d+09:36:55.614 WRITE FPDMA QUEUED 61 00 08 00 08 00 00 01 59 10 98 40 08 29d+09:36:55.612 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 16745 - # 2 Short offline Completed without error 00% 16740 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 29/34 Celsius Lifetime Min/Max Temperature: 17/41 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (272) Index Estimated Time Temperature Celsius 273 2025-07-10 09:32 31 ************ ... ..( 17 skipped). .. ************ 291 2025-07-10 09:50 31 ************ 292 2025-07-10 09:51 30 *********** ... ..( 49 skipped). .. *********** 342 2025-07-10 10:41 30 *********** 343 2025-07-10 10:42 31 ************ ... ..(119 skipped). .. ************ 463 2025-07-10 12:42 31 ************ 464 2025-07-10 12:43 32 ************* ... ..( 71 skipped). .. ************* 58 2025-07-10 13:55 32 ************* 59 2025-07-10 13:56 31 ************ ... ..( 10 skipped). .. ************ 70 2025-07-10 14:07 31 ************ 71 2025-07-10 14:08 30 *********** ... ..( 46 skipped). .. *********** 118 2025-07-10 14:55 30 *********** 119 2025-07-10 14:56 31 ************ 120 2025-07-10 14:57 30 *********** 121 2025-07-10 14:58 31 ************ ... ..( 26 skipped). .. ************ 148 2025-07-10 15:25 31 ************ 149 2025-07-10 15:26 30 *********** ... ..( 4 skipped). .. *********** 154 2025-07-10 15:31 30 *********** 155 2025-07-10 15:32 31 ************ ... ..(116 skipped). .. ************ 272 2025-07-10 17:29 31 ************ SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 518063 Vendor specific /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.2 (SATA 6Gb/s) Device Model: ST32000645NS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0004 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jul 10 17:29:55 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 297) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 080 063 044 - 101423202 3 Spin_Up_Time PO---- 094 093 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 159 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 13813687763 9 Power_On_Hours -O--CK 085 011 000 - 13997 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 155 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 4295032833 189 High_Fly_Writes -O-RCK 069 069 000 - 31 190 Airflow_Temperature_Cel -O---K 064 035 045 Past 36 (Min/Max 33/42 #949) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 145 193 Load_Cycle_Count -O--CK 100 100 000 - 161 194 Temperature_Celsius -O---K 036 065 000 - 36 (0 18 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 031 003 000 - 101423202 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 33/42 Celsius Lifetime Min/Max Temperature: 18/65 Celsius Under/Over Temperature Limit Count: 0/864 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2025-07-09 20:10 36 ***************** 76 2025-07-09 20:20 37 ****************** ... ..( 16 skipped). .. ****************** 93 2025-07-09 23:10 37 ****************** 94 2025-07-09 23:20 38 ******************* 95 2025-07-09 23:30 37 ****************** 96 2025-07-09 23:40 37 ****************** 97 2025-07-09 23:50 36 ***************** ... ..( 6 skipped). .. ***************** 104 2025-07-10 01:00 36 ***************** 105 2025-07-10 01:10 38 ******************* 106 2025-07-10 01:20 39 ******************** 107 2025-07-10 01:30 39 ******************** 108 2025-07-10 01:40 39 ******************** 109 2025-07-10 01:50 37 ****************** 110 2025-07-10 02:00 36 ***************** 111 2025-07-10 02:10 38 ******************* 112 2025-07-10 02:20 39 ******************** ... ..( 2 skipped). .. ******************** 115 2025-07-10 02:50 39 ******************** 116 2025-07-10 03:00 37 ****************** 117 2025-07-10 03:10 39 ******************** 118 2025-07-10 03:20 39 ******************** 119 2025-07-10 03:30 40 ********************* ... ..( 4 skipped). .. ********************* 124 2025-07-10 04:20 40 ********************* 125 2025-07-10 04:30 39 ******************** ... ..( 22 skipped). .. ******************** 20 2025-07-10 08:20 39 ******************** 21 2025-07-10 08:30 38 ******************* 22 2025-07-10 08:40 37 ****************** 23 2025-07-10 08:50 36 ***************** 24 2025-07-10 09:00 35 **************** 25 2025-07-10 09:10 35 **************** 26 2025-07-10 09:20 36 ***************** 27 2025-07-10 09:30 37 ****************** 28 2025-07-10 09:40 37 ****************** 29 2025-07-10 09:50 38 ******************* 30 2025-07-10 10:00 38 ******************* 31 2025-07-10 10:10 38 ******************* 32 2025-07-10 10:20 37 ****************** 33 2025-07-10 10:30 36 ***************** ... ..( 7 skipped). .. ***************** 41 2025-07-10 11:50 36 ***************** 42 2025-07-10 12:00 35 **************** ... ..( 2 skipped). .. **************** 45 2025-07-10 12:30 35 **************** 46 2025-07-10 12:40 36 ***************** ... ..( 10 skipped). .. ***************** 57 2025-07-10 14:30 36 ***************** 58 2025-07-10 14:40 38 ******************* 59 2025-07-10 14:50 39 ******************** 60 2025-07-10 15:00 40 ********************* 61 2025-07-10 15:10 40 ********************* 62 2025-07-10 15:20 40 ********************* 63 2025-07-10 15:30 39 ******************** 64 2025-07-10 15:40 39 ******************** 65 2025-07-10 15:50 39 ******************** 66 2025-07-10 16:00 38 ******************* 67 2025-07-10 16:10 37 ****************** 68 2025-07-10 16:20 36 ***************** 69 2025-07-10 16:30 35 **************** 70 2025-07-10 16:40 36 ***************** ... ..( 3 skipped). .. ***************** 74 2025-07-10 17:20 36 ***************** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.2 (SATA 6Gb/s) Device Model: ST32000645NS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0004 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jul 10 17:29:55 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 297) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 063 044 - 59667074 3 Spin_Up_Time PO---- 094 093 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 164 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 082 060 030 - 17916166727 9 Power_On_Hours -O--CK 085 011 000 - 13950 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 164 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 097 097 000 - 3 190 Airflow_Temperature_Cel -O---K 065 034 045 Past 35 (Min/Max 32/40 #946) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 151 193 Load_Cycle_Count -O--CK 100 100 000 - 165 194 Temperature_Celsius -O---K 035 066 000 - 35 (0 18 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 030 003 000 - 59667074 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 32/40 Celsius Lifetime Min/Max Temperature: 18/66 Celsius Under/Over Temperature Limit Count: 0/865 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (112) Index Estimated Time Temperature Celsius 113 2025-07-09 20:10 36 ***************** ... ..( 16 skipped). .. ***************** 2 2025-07-09 23:00 36 ***************** 3 2025-07-09 23:10 37 ****************** 4 2025-07-09 23:20 36 ***************** 5 2025-07-09 23:30 36 ***************** 6 2025-07-09 23:40 35 **************** ... ..( 6 skipped). .. **************** 13 2025-07-10 00:50 35 **************** 14 2025-07-10 01:00 37 ****************** 15 2025-07-10 01:10 38 ******************* 16 2025-07-10 01:20 38 ******************* 17 2025-07-10 01:30 38 ******************* 18 2025-07-10 01:40 37 ****************** 19 2025-07-10 01:50 36 ***************** 20 2025-07-10 02:00 37 ****************** 21 2025-07-10 02:10 38 ******************* ... ..( 2 skipped). .. ******************* 24 2025-07-10 02:40 38 ******************* 25 2025-07-10 02:50 37 ****************** 26 2025-07-10 03:00 37 ****************** 27 2025-07-10 03:10 38 ******************* 28 2025-07-10 03:20 38 ******************* 29 2025-07-10 03:30 39 ******************** ... ..( 3 skipped). .. ******************** 33 2025-07-10 04:10 39 ******************** 34 2025-07-10 04:20 38 ******************* ... ..( 23 skipped). .. ******************* 58 2025-07-10 08:20 38 ******************* 59 2025-07-10 08:30 36 ***************** 60 2025-07-10 08:40 35 **************** 61 2025-07-10 08:50 35 **************** 62 2025-07-10 09:00 34 *************** 63 2025-07-10 09:10 35 **************** 64 2025-07-10 09:20 36 ***************** 65 2025-07-10 09:30 36 ***************** 66 2025-07-10 09:40 37 ****************** 67 2025-07-10 09:50 37 ****************** 68 2025-07-10 10:00 37 ****************** 69 2025-07-10 10:10 36 ***************** 70 2025-07-10 10:20 35 **************** ... ..( 7 skipped). .. **************** 78 2025-07-10 11:40 35 **************** 79 2025-07-10 11:50 34 *************** 80 2025-07-10 12:00 34 *************** 81 2025-07-10 12:10 35 **************** 82 2025-07-10 12:20 34 *************** 83 2025-07-10 12:30 35 **************** ... ..( 10 skipped). .. **************** 94 2025-07-10 14:20 35 **************** 95 2025-07-10 14:30 37 ****************** 96 2025-07-10 14:40 38 ******************* 97 2025-07-10 14:50 39 ******************** ... ..( 2 skipped). .. ******************** 100 2025-07-10 15:20 39 ******************** 101 2025-07-10 15:30 38 ******************* 102 2025-07-10 15:40 38 ******************* 103 2025-07-10 15:50 37 ****************** 104 2025-07-10 16:00 37 ****************** 105 2025-07-10 16:10 35 **************** ... ..( 6 skipped). .. **************** 112 2025-07-10 17:20 35 **************** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS