/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-13-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: INTEL SSDPEKNW512G8 Serial Number: -- Firmware Version: 002C PCI Vendor/Subsystem ID: 0x8086 IEEE OUI Identifier: 0x5cd2e4 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Wed Oct 25 03:24:17 2023 CST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 77 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W - - 0 0 0 0 0 0 1 + 2.70W - - 1 1 1 1 0 0 2 + 2.00W - - 2 2 2 2 0 0 3 - 0.0250W - - 3 3 3 3 5000 5000 4 - 0.0040W - - 4 4 4 4 5000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 28 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 5% Data Units Read: 33,494,375 [17.1 TB] Data Units Written: 35,641,775 [18.2 TB] Host Read Commands: 381,869,316 Host Write Commands: 547,052,907 Controller Busy Time: 14,813 Power Cycles: 2,663 Power On Hours: 9,540 Unsafe Shutdowns: 422 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 54 Thermal Temp. 1 Total Time: 233 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-13-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9500325AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: D005DEM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Oct 25 03:24:17 2023 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 134) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 090 006 - 127824746 3 Spin_Up_Time PO---- 098 098 085 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7651 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 082 060 030 - 175081496 9 Power_On_Hours -O--CK 083 083 000 - 15635 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 6073 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 697 188 Command_Timeout -O--CK 100 095 000 - 25770198708 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 041 045 Past 31 (0 16 31 25 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 251 192 Power-Off_Retract_Count -O--CK 100 100 000 - 68 193 Load_Cycle_Count -O--CK 003 003 000 - 195711 194 Temperature_Celsius -O---K 031 059 000 - 31 195 Hardware_ECC_Recovered -O-RC- 050 036 000 - 127824746 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 9002 (222 117 0) 241 Total_LBAs_Written ------ 100 253 000 - 884503 242 Total_LBAs_Read ------ 100 253 000 - 325434260 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 649 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 649 [8] occurred at disk power-on lifetime: 9758 hours (406 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 51 00 7d 04 b0 00 00 Error: UNC at LBA = 0x51007d04b0 = 347900544176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 e0 00 e6 00 4e 00 c0 40 00 00:00:46.478 READ FPDMA QUEUED 60 00 00 00 20 00 c3 00 e5 00 38 40 00 00:00:46.478 READ FPDMA QUEUED 60 00 00 00 48 00 bf 00 c8 00 a0 40 00 00:00:46.478 READ FPDMA QUEUED 60 00 00 00 90 00 e7 00 d0 00 a0 40 00 00:00:46.477 READ FPDMA QUEUED 60 00 00 00 08 00 51 00 7d 04 b0 40 00 00:00:46.476 READ FPDMA QUEUED Error 648 [7] occurred at disk power-on lifetime: 9758 hours (406 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 51 00 7d 04 b0 00 00 Error: UNC at LBA = 0x51007d04b0 = 347900544176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 fa 00 76 00 68 40 00 00:00:44.059 READ FPDMA QUEUED 60 00 00 00 38 00 c3 00 d2 00 60 40 00 00:00:44.013 READ FPDMA QUEUED 60 00 00 00 88 00 c0 00 0f 00 48 40 00 00:00:43.991 READ FPDMA QUEUED 60 00 00 00 40 00 c3 00 af 00 d8 40 00 00:00:43.988 READ FPDMA QUEUED 60 00 00 00 08 00 8b 00 d2 00 50 40 00 00:00:43.972 READ FPDMA QUEUED Error 647 [6] occurred at disk power-on lifetime: 9758 hours (406 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 51 00 7d 04 ae 00 00 Error: UNC at LBA = 0x51007d04ae = 347900544174 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 ff 00 9e 00 50 40 00 00:00:35.777 READ FPDMA QUEUED 60 00 00 01 00 00 51 00 7d 04 60 40 00 00:00:35.766 READ FPDMA QUEUED 60 00 00 00 08 00 fa 00 6f 00 18 40 00 00:00:35.764 READ FPDMA QUEUED 60 00 00 00 48 00 c1 00 a0 00 30 40 00 00:00:35.755 READ FPDMA QUEUED 60 00 00 01 00 00 c1 00 9f 00 30 40 00 00:00:35.753 READ FPDMA QUEUED Error 646 [5] occurred at disk power-on lifetime: 3124 hours (130 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 08 00 c4 00 ab 00 00 Error: UNC at LBA = 0x800c400ab = 34372583595 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 48 00 08 00 c4 00 a7 e0 00 00:01:52.880 READ DMA EXT 35 00 00 00 38 00 04 00 e9 00 67 e0 00 00:01:52.880 WRITE DMA EXT 35 00 00 00 08 00 02 00 7e 00 5f e0 00 00:01:52.879 WRITE DMA EXT 35 00 00 00 08 00 00 00 00 00 d7 e0 00 00:01:52.878 WRITE DMA EXT 35 00 00 01 00 00 89 00 1c 01 8f e0 00 00:01:52.877 WRITE DMA EXT Error 645 [4] occurred at disk power-on lifetime: 3124 hours (130 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 08 00 c4 00 ab 00 00 Error: UNC at LBA = 0x800c400ab = 34372583595 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 50 00 08 00 c4 00 9f e0 00 00:01:50.689 READ DMA EXT 35 00 00 00 68 00 06 00 7a 00 47 e0 00 00:01:50.688 WRITE DMA EXT 35 00 00 00 08 00 04 00 e9 00 f7 e0 00 00:01:50.687 WRITE DMA EXT 35 00 00 00 20 00 01 00 e2 00 4f e0 00 00:01:50.686 WRITE DMA EXT 35 00 00 00 38 00 4d 00 4f 00 d7 e0 00 00:01:50.686 WRITE DMA EXT Error 644 [3] occurred at disk power-on lifetime: 3124 hours (130 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 08 00 c4 00 ab 00 00 Error: UNC at LBA = 0x800c400ab = 34372583595 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 58 00 08 00 c4 00 97 e0 00 00:01:48.386 READ DMA EXT 35 00 00 00 08 00 04 00 e9 00 e7 e0 00 00:01:48.385 WRITE DMA EXT 35 00 00 00 08 00 02 00 99 00 f7 e0 00 00:01:48.385 WRITE DMA EXT 35 00 00 00 07 00 3c 00 28 01 d7 e0 00 00:01:48.384 WRITE DMA EXT 25 00 00 00 20 00 32 00 2d 00 60 e0 00 00:01:48.288 READ DMA EXT Error 643 [2] occurred at disk power-on lifetime: 3124 hours (130 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 08 00 c4 00 ab 00 00 Error: UNC at LBA = 0x800c400ab = 34372583595 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 08 00 c4 00 8f e0 00 00:01:46.115 READ DMA EXT 35 00 00 00 20 00 04 00 e9 00 af e0 00 00:01:46.114 WRITE DMA EXT 35 00 00 00 08 00 04 00 45 00 ef e0 00 00:01:46.114 WRITE DMA EXT 35 00 00 00 08 00 60 00 00 00 af e0 00 00:01:46.113 WRITE DMA EXT 25 00 00 00 03 00 50 00 63 00 77 e0 00 00:01:46.098 READ DMA EXT Error 642 [1] occurred at disk power-on lifetime: 3124 hours (130 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 08 00 c4 00 ab 00 00 Error: UNC at LBA = 0x800c400ab = 34372583595 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 68 00 08 00 c4 00 87 e0 00 00:01:43.923 READ DMA EXT 35 00 00 00 08 00 04 00 e9 00 9f e0 00 00:01:43.923 WRITE DMA EXT 35 00 00 00 07 00 3c 00 28 01 d7 e0 00 00:01:43.922 WRITE DMA EXT 35 00 00 01 00 00 89 00 1b 01 8f e0 00 00:01:43.921 WRITE DMA EXT 35 00 00 01 00 00 3a 00 ff 01 7f e0 00 00:01:43.920 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15617 - # 2 Short offline Completed without error 00% 15424 - # 3 Short offline Completed without error 00% 15351 - # 4 Extended offline Completed without error 00% 15348 - # 5 Short offline Completed without error 00% 15327 - # 6 Short offline Completed without error 00% 15326 - # 7 Short offline Completed without error 00% 15318 - # 8 Short offline Completed without error 00% 15296 - # 9 Short offline Completed without error 00% 15274 - #10 Short offline Completed without error 00% 15262 - #11 Short offline Completed without error 00% 15243 - #12 Short offline Completed without error 00% 15221 - #13 Short offline Completed without error 00% 15209 - #14 Short offline Completed without error 00% 10674 - #15 Short offline Completed without error 00% 10670 - #16 Short offline Completed without error 00% 10669 - #17 Short offline Completed without error 00% 10662 - #18 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 25/31 Celsius Lifetime Min/Max Temperature: 0/59 Celsius Specified Max Operating Temperature: 35 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (84) Index Estimated Time Temperature Celsius 85 2023-10-25 01:17 33 ************** 86 2023-10-25 01:18 34 *************** 87 2023-10-25 01:19 34 *************** 88 2023-10-25 01:20 35 **************** ... ..( 3 skipped). .. **************** 92 2023-10-25 01:24 35 **************** 93 2023-10-25 01:25 36 ***************** ... ..( 5 skipped). .. ***************** 99 2023-10-25 01:31 36 ***************** 100 2023-10-25 01:32 37 ****************** ... ..( 15 skipped). .. ****************** 116 2023-10-25 01:48 37 ****************** 117 2023-10-25 01:49 38 ******************* ... ..( 6 skipped). .. ******************* 124 2023-10-25 01:56 38 ******************* 125 2023-10-25 01:57 ? - 126 2023-10-25 01:58 38 ******************* 127 2023-10-25 01:59 36 ***************** 0 2023-10-25 02:00 ? - 1 2023-10-25 02:01 36 ***************** 2 2023-10-25 02:02 37 ****************** 3 2023-10-25 02:03 36 ***************** 4 2023-10-25 02:04 ? - 5 2023-10-25 02:05 36 ***************** 6 2023-10-25 02:06 36 ***************** 7 2023-10-25 02:07 36 ***************** 8 2023-10-25 02:08 35 **************** ... ..( 7 skipped). .. **************** 16 2023-10-25 02:16 35 **************** 17 2023-10-25 02:17 34 *************** ... ..( 9 skipped). .. *************** 27 2023-10-25 02:27 34 *************** 28 2023-10-25 02:28 33 ************** ... ..( 9 skipped). .. ************** 38 2023-10-25 02:38 33 ************** 39 2023-10-25 02:39 32 ************* ... ..( 22 skipped). .. ************* 62 2023-10-25 03:02 32 ************* 63 2023-10-25 03:03 ? - 64 2023-10-25 03:04 26 ******* 65 2023-10-25 03:05 29 ********** 66 2023-10-25 03:06 30 *********** 67 2023-10-25 03:07 31 ************ 68 2023-10-25 03:08 32 ************* 69 2023-10-25 03:09 33 ************** ... ..( 2 skipped). .. ************** 72 2023-10-25 03:12 33 ************** 73 2023-10-25 03:13 34 *************** ... ..( 3 skipped). .. *************** 77 2023-10-25 03:17 34 *************** 78 2023-10-25 03:18 ? - 79 2023-10-25 03:19 25 ****** 80 2023-10-25 03:20 28 ********* 81 2023-10-25 03:21 30 *********** 82 2023-10-25 03:22 30 *********** 83 2023-10-25 03:23 31 ************ 84 2023-10-25 03:24 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS