/dev/sda === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37240G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: SBFKB1D1 User Capacity: 240,056,327,680 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Oct 1 14:18:17 2021 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 11792 12 Power_Cycle_Count -O--CK 100 100 000 - 2001 148 Unknown_Attribute ------ 255 255 000 - 0 149 Unknown_Attribute ------ 255 255 000 - 0 167 Write_Protect_Mode ------ 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 16 170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/11 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 116 (Average 80) 181 Program_Fail_Count -O--CK 100 100 000 - 0 182 Erase_Fail_Count ------ 255 255 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 362 194 Temperature_Celsius -O---K 060 051 000 - 40 (Min/Max 20/49) 196 Reallocated_Event_Count ------ 100 100 000 - 0 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count ------ 100 100 000 - 224 231 SSD_Life_Left PO--C- 100 100 000 - 92 233 Flash_Writes_GiB PO--C- 100 100 000 - 13822 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 8556 242 Lifetime_Reads_GiB -O--C- 100 100 000 - 11040 244 Average_Erase_Count ------ 100 100 000 - 80 245 Max_Erase_Count ------ 100 100 000 - 116 246 Total_Erase_Count ------ 100 100 000 - 620336 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 34 00 00 00 05 ea c0 e0 00 Error: ICRC, ABRT 52 sectors at LBA = 0x0005eac0 = 387776 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 34 00 00 00 05 ea c0 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 0b 00 00 00 05 ea b5 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 35 00 00 00 05 ea 80 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 0a 00 00 00 05 ea 76 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 36 00 00 00 05 ea 40 e0 00 00:00:00.000 READ DMA EXT Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 38 00 00 00 08 da 08 e0 00 Error: ICRC, ABRT 56 sectors at LBA = 0x0008da08 = 580104 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 38 00 00 00 08 da 08 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 08 00 00 00 08 da 00 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 37 00 00 00 08 d9 c9 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 09 00 00 00 08 d9 c0 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 36 00 00 00 08 d9 8a e0 00 00:00:00.000 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 3b 00 00 00 00 10 c0 e0 00 Error: ICRC, ABRT 59 sectors at LBA = 0x000010c0 = 4288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3b 00 00 00 00 10 c0 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 10 00 00 00 03 f3 f0 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 30 00 00 00 03 f3 c0 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 0d 00 00 00 00 ff 33 e0 00 00:00:00.000 READ DMA EXT 25 00 00 00 33 00 00 00 00 ff 00 e0 00 00:00:00.000 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2001 --- Lifetime Power-On Resets 0x01 0x010 4 11792 --- Power-on Hours 0x01 0x018 6 17943516379 --- Logical Sectors Written 0x01 0x028 6 23152715953 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 40 --- Current Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 224 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 8 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 79 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9500325AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0002BSM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Fri Oct 1 14:18:17 2021 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 142) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 112 093 006 - 48512233 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1279 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 5 7 Seek_Error_Rate POSR-- 075 060 030 - 38821548 9 Power_On_Hours -O--CK 085 085 000 - 13483 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 037 020 - 1080 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 438 188 Command_Timeout -O--CK 099 088 000 - 12885164516 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 061 049 045 - 39 (Min/Max 31/40) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 28 192 Power-Off_Retract_Count -O--CK 100 100 000 - 142 193 Load_Cycle_Count -O--CK 091 091 000 - 19826 194 Temperature_Celsius -O---K 039 051 000 - 39 (0 20 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 048 043 000 - 48512233 197 Current_Pending_Sector -O--C- 100 100 000 - 8 198 Offline_Uncorrectable ----C- 100 100 000 - 8 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 450 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 450 [9] occurred at disk power-on lifetime: 7404 hours (308 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 29 df 0b b0 e0 00 19:09:28.543 READ DMA EXT ef 00 10 00 03 00 00 00 00 00 00 a0 00 19:09:28.535 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 19:09:28.534 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 19:09:28.532 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 19:09:28.529 SET FEATURES [Set transfer mode] Error 449 [8] occurred at disk power-on lifetime: 7404 hours (308 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 29 df 0b b0 e0 00 19:09:24.734 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b a8 e0 00 19:09:24.731 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b a0 e0 00 19:09:24.731 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b 98 e0 00 19:09:24.730 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b 90 e0 00 19:09:24.730 READ DMA EXT Error 448 [7] occurred at disk power-on lifetime: 7404 hours (308 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 08 00 00 00 29 df 08 00 e0 00 19:09:20.823 READ DMA EXT 25 00 00 04 00 00 00 29 dd c0 00 e0 00 19:09:20.808 READ DMA EXT 25 00 00 08 00 00 00 29 dd b8 00 e0 00 19:09:20.774 READ DMA EXT 25 00 00 04 00 00 00 29 dd b4 00 e0 00 19:09:20.768 READ DMA EXT 25 00 00 05 90 00 00 29 dd 94 00 e0 00 19:09:20.612 READ DMA EXT Error 447 [6] occurred at disk power-on lifetime: 7404 hours (308 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 29 df 0b b0 e0 00 18:49:00.395 READ DMA EXT ef 00 10 00 03 00 00 00 00 00 00 a0 00 18:49:00.391 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 18:49:00.390 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 18:49:00.388 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 18:49:00.385 SET FEATURES [Set transfer mode] Error 446 [5] occurred at disk power-on lifetime: 7404 hours (308 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 29 df 0b b0 e0 00 18:48:56.572 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b a8 e0 00 18:48:56.570 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b a0 e0 00 18:48:56.569 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b 98 e0 00 18:48:56.569 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b 90 e0 00 18:48:56.568 READ DMA EXT Error 445 [4] occurred at disk power-on lifetime: 7404 hours (308 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 29 df 08 00 e0 00 18:48:52.639 READ DMA EXT 25 00 00 04 00 00 00 29 dd 8c 00 e0 00 18:48:52.362 READ DMA EXT 25 00 00 04 00 00 00 29 dd 88 00 e0 00 18:48:52.344 READ DMA EXT 25 00 00 04 00 00 00 29 c8 8c 00 e0 00 18:48:50.604 READ DMA EXT 25 00 00 04 00 00 00 29 c8 88 00 e0 00 18:48:50.587 READ DMA EXT Error 444 [3] occurred at disk power-on lifetime: 7393 hours (308 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 29 df 0b b0 e0 00 07:41:58.678 READ DMA EXT ef 00 10 00 03 00 00 00 00 00 00 a0 00 07:41:58.644 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 07:41:58.644 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 07:41:58.641 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 07:41:58.639 SET FEATURES [Set transfer mode] Error 443 [2] occurred at disk power-on lifetime: 7393 hours (308 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 29 df 0b b5 00 00 Error: UNC at LBA = 0x29df0bb5 = 702483381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 29 df 0b b0 e0 00 07:41:54.837 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b a8 e0 00 07:41:54.835 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b a0 e0 00 07:41:54.834 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b 98 e0 00 07:41:54.834 READ DMA EXT 25 00 00 00 08 00 00 29 df 0b 90 e0 00 07:41:54.834 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 31/40 Celsius Lifetime Min/Max Temperature: 20/51 Celsius Under/Over Temperature Limit Count: 0/529 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (11) Index Estimated Time Temperature Celsius 12 2021-10-01 12:11 39 ******************** ... ..( 75 skipped). .. ******************** 88 2021-10-01 13:27 39 ******************** 89 2021-10-01 13:28 40 ********************* ... ..( 38 skipped). .. ********************* 0 2021-10-01 14:07 40 ********************* 1 2021-10-01 14:08 39 ******************** 2 2021-10-01 14:09 39 ******************** 3 2021-10-01 14:10 40 ********************* 4 2021-10-01 14:11 39 ******************** 5 2021-10-01 14:12 40 ********************* ... ..( 4 skipped). .. ********************* 10 2021-10-01 14:17 40 ********************* 11 2021-10-01 14:18 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS