Probe #aa2af0a4bc of Gigabyte Z390 GAMING X-CF Desktop Computer (Z390 GAMING X)

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.19-gentoo] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA200 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX4OABB0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 8 07:18:32 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14631) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 244) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 140 140 054 - 69 3 Spin_Up_Time POS--- 142 142 024 - 238 (Average 297) 4 Start_Stop_Count -O--C- 098 098 000 - 10640 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 170 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 097 097 000 - 22051 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 4304 192 Power-Off_Retract_Count -O--CK 089 089 000 - 14185 193 Load_Cycle_Count -O--C- 089 089 000 - 14185 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 13/50) 196 Reallocated_Event_Count -O--CK 100 100 000 - 170 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 2427 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2427 [2] occurred at disk power-on lifetime: 12243 hours (510 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 c0 00 00 03 b9 3a 18 03 00 Error: WP at LBA = 0x03b93a18 = 62470680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 c0 00 00 07 4b 5a 10 40 00 04:21:57.884 WRITE FPDMA QUEUED 61 00 80 00 b8 00 00 0d c0 22 80 40 00 04:21:57.883 WRITE FPDMA QUEUED 61 01 00 00 b0 00 00 0d c0 21 80 40 00 04:21:57.883 WRITE FPDMA QUEUED 61 01 00 00 a8 00 00 0d c0 20 80 40 00 04:21:57.883 WRITE FPDMA QUEUED 61 01 00 00 a0 00 00 0d c0 1f 80 40 00 04:21:57.883 WRITE FPDMA QUEUED Error 2426 [1] occurred at disk power-on lifetime: 12243 hours (510 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 c0 00 00 03 b9 3a 18 03 00 Error: WP at LBA = 0x03b93a18 = 62470680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 80 00 50 00 00 03 be 8d a0 40 00 04:21:53.879 WRITE FPDMA QUEUED 61 01 00 00 48 00 00 03 be 8c a0 40 00 04:21:53.879 WRITE FPDMA QUEUED 61 01 00 00 40 00 00 03 be 8b a0 40 00 04:21:53.879 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 03 be 8a a0 40 00 04:21:53.879 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 03 be 89 a0 40 00 04:21:53.879 WRITE FPDMA QUEUED Error 2425 [0] occurred at disk power-on lifetime: 7819 hours (325 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 1f 46 0d b8 0f 00 Error: UNC at LBA = 0x1f460db8 = 524684728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 20 00 00 1f 46 11 f8 40 00 02:26:54.003 READ FPDMA QUEUED 60 01 00 00 18 00 00 1f 46 10 f8 40 00 02:26:54.003 READ FPDMA QUEUED 60 01 00 00 10 00 00 1f 46 0f f8 40 00 02:26:54.003 READ FPDMA QUEUED 60 01 00 00 08 00 00 1f 46 0e f8 40 00 02:26:54.002 READ FPDMA QUEUED 60 01 00 00 f8 00 00 1f 46 0d f8 40 00 02:26:54.002 READ FPDMA QUEUED Error 2424 [3] occurred at disk power-on lifetime: 7819 hours (325 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 1f 46 0d b8 0f 00 Error: UNC at LBA = 0x1f460db8 = 524684728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 d0 00 00 1f 46 0d a0 40 00 02:26:51.021 READ FPDMA QUEUED 61 00 20 00 c8 00 00 1d 26 20 00 40 00 02:26:51.021 WRITE FPDMA QUEUED 60 00 20 00 c0 00 00 1f 46 0d 80 40 00 02:26:51.021 READ FPDMA QUEUED 61 00 20 00 b8 00 00 1d 26 1f e0 40 00 02:26:51.021 WRITE FPDMA QUEUED 60 00 20 00 b0 00 00 1f 46 0d 60 40 00 02:26:51.021 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 34/35 Celsius Lifetime Min/Max Temperature: 13/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (124) Index Estimated Time Temperature Celsius 125 2023-05-08 05:11 35 **************** ... ..(126 skipped). .. **************** 124 2023-05-08 07:18 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 4304 --- Lifetime Power-On Resets 0x01 0x010 4 22051 --- Power-on Hours 0x01 0x018 6 173906639194 --- Logical Sectors Written 0x01 0x020 6 1623510072 --- Number of Write Commands 0x01 0x028 6 206040470808 --- Logical Sectors Read 0x01 0x030 6 1918609592 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18210 --- Spindle Motor Power-on Hours 0x03 0x010 4 18210 --- Head Flying Hours 0x03 0x018 4 14185 --- Head Load Events 0x03 0x020 4 170 --- Number of Reallocated Logical Sectors 0x03 0x028 4 3122 --- Read Recovery Attempts 0x03 0x030 4 6 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 2427 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 20 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 35 N-- Average Short Term Temperature 0x05 0x018 1 32 N-- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 43 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 38 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 22798 --- Number of Hardware Resets 0x06 0x010 4 9021 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.19-gentoo] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG SSD 830 Series Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: CXM03B1Q User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 T13/2015-D revision 2 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 8 07:18:34 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 21) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 540) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 9) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 093 093 000 - 32267 12 Power_Cycle_Count -O--CK 094 094 000 - 5815 177 Wear_Leveling_Count PO--C- 094 094 000 - 211 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 070 053 000 - 30 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 253 253 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 1341 241 Total_LBAs_Written -O--CK 099 099 000 - 22946180858 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 2 Comprehensive SMART error log 0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 50% 22149 - # 2 Extended offline Completed without error 00% 21563 - # 3 Short offline Completed without error 00% 21563 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 49152 R_ERR response for data FIS 0x0003 2 53248 R_ERR response for device-to-host data FIS 0x0004 2 57344 R_ERR response for host-to-device data FIS 0x0005 2 7952 R_ERR response for non-data FIS 0x0006 2 2562 R_ERR response for device-to-host non-data FIS 0x0007 2 4096 R_ERR response for host-to-device non-data FIS 0x0008 2 7952 Device-to-host non-data FIS retries 0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 25607 Device-to-host register FISes sent due to a COMRESET 0x000b 2 6145 CRC errors within host-to-device FIS 0x000d 2 7953 Non-CRC errors within host-to-device FIS 0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC 0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.19-gentoo] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT03B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 8 07:18:34 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 9943 12 Power_Cycle_Count -O--CK 098 098 000 - 1574 177 Wear_Leveling_Count PO--C- 096 096 000 - 66 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 045 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 37 241 Total_LBAs_Written -O--CK 099 099 000 - 75479340123 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 28/36 Celsius Lifetime Min/Max Temperature: 16/55 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (78) Index Estimated Time Temperature Celsius 79 2023-05-07 10:00 34 *************** 80 2023-05-07 10:10 34 *************** 81 2023-05-07 10:20 34 *************** 82 2023-05-07 10:30 35 **************** ... ..( 2 skipped). .. **************** 85 2023-05-07 11:00 35 **************** 86 2023-05-07 11:10 36 ***************** 87 2023-05-07 11:20 34 *************** 88 2023-05-07 11:30 36 ***************** 89 2023-05-07 11:40 37 ****************** ... ..( 7 skipped). .. ****************** 97 2023-05-07 13:00 37 ****************** 98 2023-05-07 13:10 33 ************** 99 2023-05-07 13:20 37 ****************** ... ..( 3 skipped). .. ****************** 103 2023-05-07 14:00 37 ****************** 104 2023-05-07 14:10 38 ******************* ... ..( 2 skipped). .. ******************* 107 2023-05-07 14:40 38 ******************* 108 2023-05-07 14:50 37 ****************** 109 2023-05-07 15:00 38 ******************* 110 2023-05-07 15:10 37 ****************** 111 2023-05-07 15:20 38 ******************* ... ..( 2 skipped). .. ******************* 114 2023-05-07 15:50 38 ******************* 115 2023-05-07 16:00 37 ****************** 116 2023-05-07 16:10 37 ****************** 117 2023-05-07 16:20 38 ******************* ... ..( 2 skipped). .. ******************* 120 2023-05-07 16:50 38 ******************* 121 2023-05-07 17:00 37 ****************** 122 2023-05-07 17:10 36 ***************** 123 2023-05-07 17:20 35 **************** 124 2023-05-07 17:30 38 ******************* 125 2023-05-07 17:40 38 ******************* 126 2023-05-07 17:50 32 ************* 127 2023-05-07 18:00 33 ************** 0 2023-05-07 18:10 31 ************ 1 2023-05-07 18:20 35 **************** 2 2023-05-07 18:30 36 ***************** 3 2023-05-07 18:40 35 **************** 4 2023-05-07 18:50 33 ************** 5 2023-05-07 19:00 34 *************** 6 2023-05-07 19:10 34 *************** 7 2023-05-07 19:20 36 ***************** 8 2023-05-07 19:30 ? - 9 2023-05-07 19:40 32 ************* 10 2023-05-07 19:50 32 ************* 11 2023-05-07 20:00 36 ***************** 12 2023-05-07 20:10 35 **************** 13 2023-05-07 20:20 35 **************** 14 2023-05-07 20:30 36 ***************** 15 2023-05-07 20:40 34 *************** 16 2023-05-07 20:50 38 ******************* 17 2023-05-07 21:00 ? - 18 2023-05-07 21:10 31 ************ 19 2023-05-07 21:20 29 ********** 20 2023-05-07 21:30 34 *************** 21 2023-05-07 21:40 34 *************** 22 2023-05-07 21:50 29 ********** 23 2023-05-07 22:00 36 ***************** 24 2023-05-07 22:10 37 ****************** 25 2023-05-07 22:20 37 ****************** 26 2023-05-07 22:30 38 ******************* 27 2023-05-07 22:40 36 ***************** 28 2023-05-07 22:50 31 ************ 29 2023-05-07 23:00 31 ************ 30 2023-05-07 23:10 30 *********** ... ..( 2 skipped). .. *********** 33 2023-05-07 23:40 30 *********** 34 2023-05-07 23:50 31 ************ ... ..( 6 skipped). .. ************ 41 2023-05-08 01:00 31 ************ 42 2023-05-08 01:10 30 *********** 43 2023-05-08 01:20 30 *********** 44 2023-05-08 01:30 31 ************ 45 2023-05-08 01:40 30 *********** ... ..( 6 skipped). .. *********** 52 2023-05-08 02:50 30 *********** 53 2023-05-08 03:00 29 ********** ... ..( 2 skipped). .. ********** 56 2023-05-08 03:30 29 ********** 57 2023-05-08 03:40 28 ********* 58 2023-05-08 03:50 29 ********** 59 2023-05-08 04:00 29 ********** 60 2023-05-08 04:10 28 ********* 61 2023-05-08 04:20 28 ********* 62 2023-05-08 04:30 ? - 63 2023-05-08 04:40 29 ********** 64 2023-05-08 04:50 28 ********* 65 2023-05-08 05:00 36 ***************** 66 2023-05-08 05:10 28 ********* 67 2023-05-08 05:20 29 ********** ... ..( 4 skipped). .. ********** 72 2023-05-08 06:10 29 ********** 73 2023-05-08 06:20 28 ********* ... ..( 4 skipped). .. ********* 78 2023-05-08 07:10 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1574 --- Lifetime Power-On Resets 0x01 0x010 4 9943 --- Power-on Hours 0x01 0x018 6 75479340123 --- Logical Sectors Written 0x01 0x020 6 921929436 --- Number of Write Commands 0x01 0x028 6 116999563981 --- Logical Sectors Read 0x01 0x030 6 1245478802 --- Number of Read Commands 0x01 0x038 6 335000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x020 1 55 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3567 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 3 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub