Probe #ac214c2b48 of Samsung 300V3A

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547550A9E384 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JE3OA50A User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jul 23 20:54:18 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 151) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 243 243 033 - 1 4 Start_Stop_Count -O--C- 097 097 000 - 6243 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 057 057 000 - 18984 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 5953 191 G-Sense_Error_Rate -O-R-- 095 095 000 - 196617 192 Power-Off_Retract_Count -O--CK 096 096 000 - 997 193 Load_Cycle_Count -O--C- 091 091 000 - 96838 194 Temperature_Celsius -O---- 130 130 000 - 46 (Min/Max 18/72) 196 Reallocated_Event_Count -O--CK 100 100 000 - 14 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 47 Celsius Power Cycle Min/Max Temperature: 28/49 Celsius Lifetime Min/Max Temperature: 18/72 Celsius Specified Max Operating Temperature: 46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (28) Index Estimated Time Temperature Celsius 29 2020-07-23 18:47 45 ************************** 30 2020-07-23 18:48 46 *************************** ... ..( 13 skipped). .. *************************** 44 2020-07-23 19:02 46 *************************** 45 2020-07-23 19:03 47 **************************** ... ..( 3 skipped). .. **************************** 49 2020-07-23 19:07 47 **************************** 50 2020-07-23 19:08 48 ***************************** ... ..( 5 skipped). .. ***************************** 56 2020-07-23 19:14 48 ***************************** 57 2020-07-23 19:15 47 **************************** 58 2020-07-23 19:16 48 ***************************** ... ..( 5 skipped). .. ***************************** 64 2020-07-23 19:22 48 ***************************** 65 2020-07-23 19:23 49 ****************************** 66 2020-07-23 19:24 49 ****************************** 67 2020-07-23 19:25 48 ***************************** 68 2020-07-23 19:26 48 ***************************** 69 2020-07-23 19:27 49 ****************************** 70 2020-07-23 19:28 48 ***************************** ... ..( 7 skipped). .. ***************************** 78 2020-07-23 19:36 48 ***************************** 79 2020-07-23 19:37 47 **************************** 80 2020-07-23 19:38 48 ***************************** 81 2020-07-23 19:39 47 **************************** 82 2020-07-23 19:40 47 **************************** 83 2020-07-23 19:41 48 ***************************** 84 2020-07-23 19:42 47 **************************** ... ..( 16 skipped). .. **************************** 101 2020-07-23 19:59 47 **************************** 102 2020-07-23 20:00 46 *************************** 103 2020-07-23 20:01 47 **************************** 104 2020-07-23 20:02 47 **************************** 105 2020-07-23 20:03 46 *************************** ... ..( 49 skipped). .. *************************** 27 2020-07-23 20:53 46 *************************** 28 2020-07-23 20:54 47 **************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 5953 --- Lifetime Power-On Resets 0x01 0x010 4 18984 --- Power-on Hours 0x01 0x018 6 59253306900 --- Logical Sectors Written 0x01 0x020 6 1106465298 --- Number of Write Commands 0x01 0x028 6 80194634204 --- Logical Sectors Read 0x01 0x030 6 1364142647 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18770 --- Spindle Motor Power-on Hours 0x03 0x010 4 18763 --- Head Flying Hours 0x03 0x018 4 96838 --- Head Load Events 0x03 0x020 4 15 --- Number of Reallocated Logical Sectors 0x03 0x028 4 11558 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 11819 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 46 --- Current Temperature 0x05 0x010 1 46 N-- Average Short Term Temperature 0x05 0x018 1 44 N-- Average Long Term Temperature 0x05 0x020 1 72 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x030 1 54 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 50 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 280 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 25861 --- Number of Hardware Resets 0x06 0x010 4 6657 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub