Probe #ac54c220ab of Gigabyte GA-870A-UD3 Desktop Computer

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.9.155-nrj-desktop-1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-08WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 4 10:25:04 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 115) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 172 170 021 - 2366 4 Start_Stop_Count -O--CK 099 099 000 - 1053 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1144 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1053 192 Power-Off_Retract_Count -O--CK 200 200 000 - 13 193 Load_Cycle_Count -O--CK 200 200 000 - 1051 194 Temperature_Celsius -O---K 113 103 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 30/30 Celsius Lifetime Min/Max Temperature: 21/40 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (179) Index Estimated Time Temperature Celsius 180 2020-08-04 02:28 30 *********** ... ..( 2 skipped). .. *********** 183 2020-08-04 02:31 30 *********** 184 2020-08-04 02:32 ? - 185 2020-08-04 02:33 26 ******* ... ..( 2 skipped). .. ******* 188 2020-08-04 02:36 26 ******* 189 2020-08-04 02:37 27 ******** 190 2020-08-04 02:38 27 ******** 191 2020-08-04 02:39 28 ********* ... ..( 5 skipped). .. ********* 197 2020-08-04 02:45 28 ********* 198 2020-08-04 02:46 29 ********** ... ..( 4 skipped). .. ********** 203 2020-08-04 02:51 29 ********** 204 2020-08-04 02:52 ? - 205 2020-08-04 02:53 30 *********** ... ..( 23 skipped). .. *********** 229 2020-08-04 03:17 30 *********** 230 2020-08-04 03:18 25 ****** 231 2020-08-04 03:19 26 ******* 232 2020-08-04 03:20 ? - 233 2020-08-04 03:21 26 ******* 234 2020-08-04 03:22 25 ****** 235 2020-08-04 03:23 26 ******* 236 2020-08-04 03:24 26 ******* 237 2020-08-04 03:25 27 ******** 238 2020-08-04 03:26 27 ******** 239 2020-08-04 03:27 28 ********* ... ..( 2 skipped). .. ********* 242 2020-08-04 03:30 28 ********* 243 2020-08-04 03:31 29 ********** ... ..( 6 skipped). .. ********** 250 2020-08-04 03:38 29 ********** 251 2020-08-04 03:39 30 *********** ... ..( 33 skipped). .. *********** 285 2020-08-04 04:13 30 *********** 286 2020-08-04 04:14 31 ************ ... ..(219 skipped). .. ************ 28 2020-08-04 07:54 31 ************ 29 2020-08-04 07:55 ? - 30 2020-08-04 07:56 25 ****** 31 2020-08-04 07:57 25 ****** 32 2020-08-04 07:58 26 ******* 33 2020-08-04 07:59 26 ******* 34 2020-08-04 08:00 27 ******** 35 2020-08-04 08:01 27 ******** 36 2020-08-04 08:02 28 ********* ... ..( 2 skipped). .. ********* 39 2020-08-04 08:05 28 ********* 40 2020-08-04 08:06 29 ********** ... ..( 7 skipped). .. ********** 48 2020-08-04 08:14 29 ********** 49 2020-08-04 08:15 30 *********** ... ..( 81 skipped). .. *********** 131 2020-08-04 09:37 30 *********** 132 2020-08-04 09:38 ? - 133 2020-08-04 09:39 21 ** 134 2020-08-04 09:40 21 ** 135 2020-08-04 09:41 22 *** 136 2020-08-04 09:42 23 **** 137 2020-08-04 09:43 24 ***** 138 2020-08-04 09:44 24 ***** 139 2020-08-04 09:45 25 ****** 140 2020-08-04 09:46 25 ****** 141 2020-08-04 09:47 26 ******* ... ..( 2 skipped). .. ******* 144 2020-08-04 09:50 26 ******* 145 2020-08-04 09:51 27 ******** ... ..( 2 skipped). .. ******** 148 2020-08-04 09:54 27 ******** 149 2020-08-04 09:55 28 ********* ... ..( 8 skipped). .. ********* 158 2020-08-04 10:04 28 ********* 159 2020-08-04 10:05 29 ********** ... ..( 15 skipped). .. ********** 175 2020-08-04 10:21 29 ********** 176 2020-08-04 10:22 30 *********** ... ..( 2 skipped). .. *********** 179 2020-08-04 10:25 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1484 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.9.155-nrj-desktop-1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37120G Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: SBFK71E0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 4 10:25:05 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 9 Power_On_Hours -O--C- 100 100 000 - 3117 12 Power_Cycle_Count -O--C- 100 100 000 - 2497 148 Unknown_Attribute ------ 255 255 000 - 0 149 Unknown_Attribute ------ 255 255 000 - 0 167 Write_Protect_Mode -O---K 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 9 170 Bad_Blk_Ct_Erl/Lat PO--C- 100 100 010 - 0/10 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 7 (Average 2) 181 Program_Fail_Count -O--C- 100 100 000 - 0 182 Erase_Fail_Count ------ 255 255 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 70 194 Temperature_Celsius PO---K 071 067 000 - 29 (Min/Max 18/33) 196 Reallocated_Event_Count ------ 100 100 000 - 0 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count ------ 100 100 000 - 2 231 SSD_Life_Left PO--C- 100 100 000 - 99 233 Flash_Writes_GiB PO--C- 100 100 000 - 266 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 239 242 Lifetime_Reads_GiB -O--C- 100 100 000 - 505 244 Average_Erase_Count ------ 100 100 000 - 2 245 Max_Erase_Count ------ 100 100 000 - 7 246 Total_Erase_Count ------ 100 100 000 - 13824 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2497 --- Lifetime Power-On Resets 0x01 0x010 4 3117 --- Power-on Hours 0x01 0x018 6 501663603 --- Logical Sectors Written 0x01 0x028 6 1060734423 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 2 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub