/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Maxtor DiamondMax 21 Device Model: MAXTOR STM3250310AS Serial Number: -- Firmware Version: 4.AAA User Capacity: 250,058,268,160 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Jan 21 00:03:45 2024 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 081 081 020 - 20085 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 4 7 Seek_Error_Rate POSR-- 087 060 030 - 474783578 9 Power_On_Hours -O--CK 079 079 000 - 18482 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 064 064 020 - 37236 187 Reported_Uncorrect -O--CK 001 001 000 - 417 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 066 049 045 - 34 (Min/Max 7/51) 194 Temperature_Celsius -O---K 034 051 000 - 34 (0 7 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 072 058 000 - 31561211 197 Current_Pending_Sector -O--C- 100 100 000 - 15 198 Offline_Uncorrectable ----C- 100 100 000 - 15 199 UDMA_CRC_Error_Count -OSRCK 200 197 000 - 180 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 2299 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2299 [18] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.526 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.513 READ DMA EXT Error 2298 [17] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT Error 2297 [16] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT Error 2296 [15] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:36.609 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.526 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.513 READ DMA EXT Error 2295 [14] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.526 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.513 READ DMA EXT Error 2294 [13] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT Error 2293 [12] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.162 READ DMA EXT Error 2292 [11] occurred at disk power-on lifetime: 16938 hours (705 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 3a 00 ad 66 e0 00 Error: UNC at LBA = 0x133a00ad66 = 82577501542 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:08.163 READ DMA EXT 25 00 00 00 01 00 13 3a 00 ad 40 e0 00 00:00:36.609 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.526 READ DMA EXT 25 00 00 00 40 00 13 3a 00 ad 40 e0 00 00:00:32.513 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy 0x8002 2 0 Vendor specific 0x8003 2 8 Vendor specific 0x8004 2 0 Vendor specific /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: JAMESDONKEY JD120 120GB Serial Number: -- Firmware Version: JD2022 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 21 00:03:45 2024 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 4074 12 Power_Cycle_Count -O--CK 100 100 050 - 3164 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute PO--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 21 164 Unknown_Attribute -O--CK 100 100 050 - 68958 165 Unknown_Attribute -O--CK 100 100 050 - 389 166 Unknown_Attribute -O--CK 100 100 050 - 316 167 Unknown_Attribute -O--CK 100 100 050 - 357 168 Unknown_Attribute -O--CK 100 100 050 - 5050 169 Unknown_Attribute -O--CK 100 100 050 - 93 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 1105 194 Temperature_Celsius -O---K 100 100 050 - 25 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written ----CK 100 100 050 - 470279 242 Total_LBAs_Read ----CK 100 100 050 - 510816 245 Unknown_Attribute -O--CK 100 100 050 - 495383 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 32 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3164 --- Lifetime Power-On Resets 0x01 0x010 4 4074 --- Power-on Hours 0x01 0x018 6 755497271 --- Logical Sectors Written 0x01 0x020 6 300588827 --- Number of Write Commands 0x01 0x028 6 3412128531 --- Logical Sectors Read 0x01 0x030 6 387881845 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 10 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 18 Device-to-host register FISes sent due to a COMRESET /dev/sdc smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.11-desktop-1omv2390] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: C-S12 120GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HPS1A30F User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 21 00:03:46 2024 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 563 12 Power_Cycle_Count -O--CK 100 100 050 - 375 160 Unknown_Attribute -O--CK 100 100 050 - 21 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 548 164 Unknown_Attribute -O--CK 100 100 050 - 91 165 Unknown_Attribute -O--CK 100 100 050 - 108 166 Unknown_Attribute -O--CK 100 100 050 - 55 167 Unknown_Attribute -O--CK 100 100 050 - 75 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 41248 177 Wear_Leveling_Count -O--CK 100 100 050 - 102205989 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 106 194 Temperature_Celsius -O--CK 100 100 050 - 34 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 77473 242 Total_LBAs_Read -O--CK 100 100 050 - 46557 245 Unknown_Attribute -O--CK 100 100 050 - 151122 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 5 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [0] occurred at disk power-on lifetime: 545 hours (22 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 40 00 70 00 09 c9 00 a0 00 00 00 at LBA = 0x9c900a000 = 42026967040 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 f0 00 70 00 09 c9 00 a0 00 40 08 01:15:00.410 WRITE FPDMA QUEUED 61 04 c8 00 68 00 09 74 00 5c 40 40 08 01:15:00.410 WRITE FPDMA QUEUED 61 00 90 00 60 00 07 25 00 d7 20 40 08 01:15:00.410 WRITE FPDMA QUEUED 61 00 20 00 58 00 09 c8 00 a0 e0 40 08 01:15:00.410 WRITE FPDMA QUEUED 61 01 60 00 50 00 09 72 00 5c e0 40 08 01:15:00.410 WRITE FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 545 hours (22 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 a0 00 07 4b 00 cd 88 00 00 at LBA = 0x74b00cd88 = 31323114888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 a0 00 07 4b 00 cd 88 40 08 00:58:39.300 READ FPDMA QUEUED 60 00 40 00 98 00 07 4b 00 cd 48 40 08 00:58:39.300 READ FPDMA QUEUED 60 00 20 00 90 00 07 4b 00 cd 28 40 08 00:58:39.300 READ FPDMA QUEUED 60 00 10 00 48 00 0c 52 00 08 70 40 08 00:58:39.300 READ FPDMA QUEUED 60 00 10 00 88 00 07 ed 00 cb a0 40 08 00:58:39.300 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 545 hours (22 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 40 00 20 00 06 dc 00 5c 90 00 00 at LBA = 0x6dc005c90 = 29460814992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 68 00 20 00 06 dc 00 5c 90 40 08 00:43:05.280 WRITE FPDMA QUEUED 06 00 01 00 01 00 00 00 00 00 00 a0 08 00:43:05.270 DATA SET MANAGEMENT e7 00 00 00 00 00 00 00 00 00 00 a0 08 00:43:05.270 FLUSH CACHE 61 00 08 00 a8 00 01 cf 00 f5 e0 40 08 00:43:05.270 WRITE FPDMA QUEUED 61 00 08 00 a0 00 06 dc 00 5c 88 40 08 00:43:05.270 WRITE FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 544 hours (22 days + 16 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 88 00 08 ef 00 8b d8 00 00 at LBA = 0x8ef008bd8 = 38369528792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 88 00 08 ef 00 8b d8 40 08 00:17:47.400 READ FPDMA QUEUED 60 00 08 00 80 00 08 ef 00 8b 98 40 08 00:17:47.400 READ FPDMA QUEUED 60 00 08 00 78 00 08 ef 00 8b 70 40 08 00:17:47.400 READ FPDMA QUEUED 60 00 08 00 70 00 08 ef 00 8b 48 40 08 00:17:47.400 READ FPDMA QUEUED 60 00 08 00 68 00 08 ef 00 8b 10 40 08 00:17:47.400 READ FPDMA QUEUED SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 375 --- Lifetime Power-On Resets 0x01 0x010 4 563 --- Power-on Hours 0x01 0x018 6 5077270528 --- Logical Sectors Written 0x01 0x020 6 36638996 --- Number of Write Commands 0x01 0x028 6 3051159552 --- Logical Sectors Read 0x01 0x030 6 27894164 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 1321 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3880 Device-to-host register FISes sent due to a COMRESET 0x000b 4 5 CRC errors within host-to-device FIS 0x000d 4 2 Non-CRC errors within host-to-device FIS