/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Model: WDC WD5003AZEX-00MK2A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500 107 862 016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 12 14:25:05 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5820) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 63) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 10402 3 Spin_Up_Time POS--K 176 170 021 - 2191 4 Start_Stop_Count -O--CK 098 098 000 - 2993 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 092 092 000 - 6187 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2861 192 Power-Off_Retract_Count -O--CK 197 197 000 - 2313 193 Load_Cycle_Count -O--CK 200 200 000 - 680 194 Temperature_Celsius -O---K 108 098 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 10420 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10420 [3] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 00 71 cf 78 e0 00 Error: IDNF 8 sectors at LBA = 0x0071cf78 = 7458680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 71 cf 78 e0 00 05:47:26.683 READ DMA EXT 35 00 00 00 40 00 00 02 a4 fa c0 e0 00 05:47:23.788 WRITE DMA EXT 25 00 00 00 08 00 00 00 72 79 d0 e0 00 05:47:22.843 READ DMA EXT 25 00 00 00 08 00 00 00 71 c0 78 e0 00 05:47:22.835 READ DMA EXT 25 00 00 00 03 00 00 00 10 ba 18 e0 00 05:47:22.835 READ DMA EXT Error 10419 [2] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 00 71 cf 78 e0 00 Error: IDNF 8 sectors at LBA = 0x0071cf78 = 7458680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 71 cf 78 e0 00 05:47:18.892 READ DMA EXT 35 00 00 00 20 00 00 00 48 e1 00 e0 00 05:47:18.887 WRITE DMA EXT 35 00 00 00 08 00 00 00 72 72 d0 e0 00 05:47:18.887 WRITE DMA EXT 35 00 00 00 08 00 00 00 72 72 b8 e0 00 05:47:18.887 WRITE DMA EXT 35 00 00 00 08 00 00 00 72 71 48 e0 00 05:47:18.886 WRITE DMA EXT Error 10418 [1] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 00 71 cf 78 e0 00 Error: IDNF 8 sectors at LBA = 0x0071cf78 = 7458680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 71 cf 78 e0 00 05:47:11.095 READ DMA EXT 25 00 00 00 08 00 00 02 30 e6 a0 e0 00 05:47:09.604 READ DMA EXT 25 00 00 00 40 00 00 02 30 e6 a8 e0 00 05:47:09.604 READ DMA EXT 25 00 00 00 40 00 00 02 30 e6 60 e0 00 05:47:09.604 READ DMA EXT 25 00 00 00 40 00 00 02 30 e6 18 e0 00 05:47:09.604 READ DMA EXT Error 10417 [0] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 00 71 cf 78 e0 00 Error: IDNF 8 sectors at LBA = 0x0071cf78 = 7458680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 71 cf 78 e0 00 05:47:03.306 READ DMA EXT 25 00 00 00 40 00 00 00 43 75 ca e0 00 05:47:03.139 READ DMA EXT 25 00 00 00 40 00 00 03 42 d7 32 e0 00 05:47:02.869 READ DMA EXT 25 00 00 00 38 00 00 03 42 d4 02 e0 00 05:47:02.867 READ DMA EXT 25 00 00 00 40 00 00 03 42 d7 72 e0 00 05:47:02.858 READ DMA EXT Error 10416 [23] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 00 71 cf 78 e0 00 Error: IDNF 8 sectors at LBA = 0x0071cf78 = 7458680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 71 cf 78 e0 00 05:46:55.500 READ DMA EXT 25 00 00 00 08 00 00 00 71 cf 70 e0 00 05:46:55.500 READ DMA EXT 25 00 00 00 08 00 00 00 71 cf 68 e0 00 05:46:55.500 READ DMA EXT 25 00 00 00 08 00 00 00 71 cf 60 e0 00 05:46:55.500 READ DMA EXT 25 00 00 00 08 00 00 00 71 cf 58 e0 00 05:46:55.499 READ DMA EXT Error 10415 [22] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 60 00 00 00 71 cf 48 e0 00 Error: UNC 96 sectors at LBA = 0x0071cf48 = 7458632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 00 00 71 cf 48 e0 00 05:46:52.660 READ DMA EXT 35 00 00 00 10 00 00 01 de 11 b0 e0 00 05:46:52.219 WRITE DMA EXT 35 00 00 00 48 00 00 01 d6 b3 b8 e0 00 05:46:52.219 WRITE DMA EXT 35 00 00 00 20 00 00 01 dd 12 c8 e0 00 05:46:52.219 WRITE DMA EXT 35 00 00 00 48 00 00 01 c2 d6 48 e0 00 05:46:52.218 WRITE DMA EXT Error 10414 [21] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 60 00 00 00 71 cf 48 e0 00 Error: IDNF 96 sectors at LBA = 0x0071cf48 = 7458632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 00 00 71 cf 48 e0 00 05:46:44.870 READ DMA EXT 25 00 00 00 38 00 00 01 39 89 8a e0 00 05:46:43.964 READ DMA EXT 25 00 00 00 28 00 00 00 1f 02 62 e0 00 05:46:43.944 READ DMA EXT 25 00 00 00 28 00 00 00 10 1d 1a e0 00 05:46:43.941 READ DMA EXT 25 00 00 00 08 00 00 00 1f 4c 63 e0 00 05:46:43.924 READ DMA EXT Error 10413 [20] occurred at disk power-on lifetime: 5345 hours (222 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 60 00 00 00 71 cf 48 e0 00 Error: IDNF 96 sectors at LBA = 0x0071cf48 = 7458632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 00 00 71 cf 48 e0 00 05:46:37.080 READ DMA EXT 35 00 00 00 18 00 00 00 6b 69 48 e0 00 05:46:37.080 WRITE DMA EXT 25 00 00 00 30 00 00 00 64 af 32 e0 00 05:46:37.069 READ DMA EXT 35 00 00 00 08 00 00 00 56 6b 00 e0 00 05:46:37.069 WRITE DMA EXT 25 00 00 00 3d 00 00 00 2e f0 5a e0 00 05:46:37.063 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 35/36 Celsius Lifetime Min/Max Temperature: 19/45 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (466) Index Estimated Time Temperature Celsius 467 2017-04-12 06:28 35 **************** 468 2017-04-12 06:29 35 **************** 469 2017-04-12 06:30 35 **************** 470 2017-04-12 06:31 36 ***************** ... ..( 17 skipped). .. ***************** 10 2017-04-12 06:49 36 ***************** 11 2017-04-12 06:50 35 **************** ... ..( 75 skipped). .. **************** 87 2017-04-12 08:06 35 **************** 88 2017-04-12 08:07 36 ***************** ... ..( 15 skipped). .. ***************** 104 2017-04-12 08:23 36 ***************** 105 2017-04-12 08:24 ? - 106 2017-04-12 08:25 25 ****** 107 2017-04-12 08:26 25 ****** 108 2017-04-12 08:27 25 ****** 109 2017-04-12 08:28 26 ******* 110 2017-04-12 08:29 27 ******** 111 2017-04-12 08:30 27 ******** 112 2017-04-12 08:31 28 ********* 113 2017-04-12 08:32 28 ********* 114 2017-04-12 08:33 28 ********* 115 2017-04-12 08:34 29 ********** 116 2017-04-12 08:35 29 ********** 117 2017-04-12 08:36 30 *********** 118 2017-04-12 08:37 30 *********** 119 2017-04-12 08:38 31 ************ ... ..( 2 skipped). .. ************ 122 2017-04-12 08:41 31 ************ 123 2017-04-12 08:42 32 ************* ... ..( 3 skipped). .. ************* 127 2017-04-12 08:46 32 ************* 128 2017-04-12 08:47 33 ************** ... ..( 4 skipped). .. ************** 133 2017-04-12 08:52 33 ************** 134 2017-04-12 08:53 34 *************** ... ..( 20 skipped). .. *************** 155 2017-04-12 09:14 34 *************** 156 2017-04-12 09:15 35 **************** ... ..( 56 skipped). .. **************** 213 2017-04-12 10:12 35 **************** 214 2017-04-12 10:13 ? - 215 2017-04-12 10:14 36 ***************** 216 2017-04-12 10:15 ? - 217 2017-04-12 10:16 36 ***************** 218 2017-04-12 10:17 ? - 219 2017-04-12 10:18 36 ***************** 220 2017-04-12 10:19 ? - 221 2017-04-12 10:20 36 ***************** 222 2017-04-12 10:21 ? - 223 2017-04-12 10:22 36 ***************** 224 2017-04-12 10:23 ? - 225 2017-04-12 10:24 36 ***************** 226 2017-04-12 10:25 ? - 227 2017-04-12 10:26 36 ***************** 228 2017-04-12 10:27 ? - 229 2017-04-12 10:28 36 ***************** 230 2017-04-12 10:29 35 **************** ... ..( 7 skipped). .. **************** 238 2017-04-12 10:37 35 **************** 239 2017-04-12 10:38 34 *************** ... ..( 41 skipped). .. *************** 281 2017-04-12 11:20 34 *************** 282 2017-04-12 11:21 35 **************** ... ..( 58 skipped). .. **************** 341 2017-04-12 12:20 35 **************** 342 2017-04-12 12:21 34 *************** ... ..( 8 skipped). .. *************** 351 2017-04-12 12:30 34 *************** 352 2017-04-12 12:31 35 **************** ... ..( 20 skipped). .. **************** 373 2017-04-12 12:52 35 **************** 374 2017-04-12 12:53 ? - 375 2017-04-12 12:54 35 **************** ... ..( 90 skipped). .. **************** 466 2017-04-12 14:25 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 562 Vendor specific