/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.32-generic-2rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ATA IV Device Model: ST340016A Serial Number: -- Firmware Version: 3.19 User Capacity: 40,020,664,320 bytes [40.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-5 (minor revision not indicated) Local Time is: Fri Nov 11 22:05:13 2022 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 422) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 31) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 073 069 034 - 159703623 3 Spin_Up_Time PO---- 074 070 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 957 5 Reallocated_Sector_Ct PO--CK 099 099 036 - 48 7 Seek_Error_Rate POSR-- 075 060 030 - 34894976 9 Power_On_Hours -O--CK 099 099 000 - 1427 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1114 194 Temperature_Celsius -O---K 026 047 000 - 26 195 Hardware_ECC_Recovered -O-RC- 073 069 000 - 159703623 197 Current_Pending_Sector -O--C- 100 100 000 - 4 198 Offline_Uncorrectable ----C- 100 100 000 - 4 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 098 251 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 1607 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1607 occurred at disk power-on lifetime: 1299 hours (54 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 25 d5 5c f0 Error: UNC at LBA = 0x005cd525 = 6083877 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 cf d4 5c f0 00 00:28:17.226 READ DMA ca 00 08 af cf d6 f0 00 00:28:17.226 WRITE DMA c8 00 01 00 00 00 f0 00 00:28:17.211 READ DMA ca 00 08 ef ce d6 f0 00 00:28:17.211 WRITE DMA ca 00 08 bf 83 05 f0 00 00:28:17.194 WRITE DMA Error 1606 occurred at disk power-on lifetime: 1299 hours (54 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 19 ca 5c f0 Error: UNC at LBA = 0x005cca19 = 6081049 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 a7 c9 5c f0 00 00:28:13.231 READ DMA ca 00 40 27 c9 5c f0 00 00:28:13.220 WRITE DMA ca 00 40 a7 c8 5c f0 00 00:28:13.209 WRITE DMA ca 00 50 27 c8 5c f0 00 00:28:13.203 WRITE DMA ca 00 50 a7 c7 5c f0 00 00:28:13.191 WRITE DMA Error 1605 occurred at disk power-on lifetime: 864 hours (36 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 d6 08 5d f0 Error: UNC at LBA = 0x005d08d6 = 6097110 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 50 b7 08 5d f0 00 01:14:16.820 READ DMA ca 00 60 27 e4 58 f0 00 01:14:16.819 WRITE DMA ca 00 58 9f 17 55 f0 00 01:14:16.818 WRITE DMA c8 00 18 e1 7d 4f f0 00 01:14:16.810 READ DMA ca 00 80 cf 54 2c f0 00 01:14:16.809 WRITE DMA Error 1604 occurred at disk power-on lifetime: 864 hours (36 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 d6 08 5d f0 Error: UNC at LBA = 0x005d08d6 = 6097110 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 50 b7 08 5d f0 00 01:14:13.196 READ DMA c8 00 10 51 c4 17 f0 00 01:14:13.183 READ DMA ca 00 10 67 6d 17 f0 00 01:14:13.182 WRITE DMA e7 00 00 00 00 00 b0 00 01:14:13.086 FLUSH CACHE c8 00 01 3d e7 da f0 00 01:14:13.077 READ DMA Error 1603 occurred at disk power-on lifetime: 864 hours (36 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 d6 08 5d f0 Error: UNC at LBA = 0x005d08d6 = 6097110 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 50 b7 08 5d f0 00 01:14:09.302 READ DMA ca 00 60 57 21 59 f0 00 01:14:09.301 WRITE DMA ca 00 80 cf 52 2c f0 00 01:14:09.300 WRITE DMA ca 00 80 4f 52 2c f0 00 01:14:09.299 WRITE DMA ca 00 58 67 cb 1f f0 00 01:14:09.298 WRITE DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported