/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue (SATA 6Gb/s) Device Model: WDC WD10EZEX-00BN5A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jan 27 22:21:14 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11520) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 119) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 248 3 Spin_Up_Time POS--K 173 172 021 - 2316 4 Start_Stop_Count -O--CK 100 100 000 - 935 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 095 095 000 - 3861 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 934 192 Power-Off_Retract_Count -O--CK 200 200 000 - 134 193 Load_Cycle_Count -O--CK 200 200 000 - 800 194 Temperature_Celsius -O---K 095 088 000 - 48 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 4 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 101 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 101 [4] occurred at disk power-on lifetime: 1986 hours (82 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 0f e5 7c 48 40 00 Error: UNC at LBA = 0x0fe57c48 = 266697800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 f0 00 00 0f e5 7c 48 40 08 03:28:36.718 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 03:28:36.713 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 03:28:36.713 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 03:28:36.713 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 03:28:36.712 SET FEATURES [Set transfer mode] Error 100 [3] occurred at disk power-on lifetime: 1986 hours (82 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 0f e5 7c 48 40 00 Error: UNC at LBA = 0x0fe57c48 = 266697800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 e8 00 00 0f e5 7c 48 40 08 03:28:32.738 READ FPDMA QUEUED 61 04 00 00 e0 00 00 1e 99 cf f8 40 08 03:28:32.734 WRITE FPDMA QUEUED 61 04 00 00 d8 00 00 1e 99 cb f8 40 08 03:28:32.731 WRITE FPDMA QUEUED 61 04 00 00 d0 00 00 1e 99 c7 f8 40 08 03:28:32.729 WRITE FPDMA QUEUED 61 04 00 00 c8 00 00 1e 99 c3 f8 40 08 03:28:32.725 WRITE FPDMA QUEUED Error 99 [2] occurred at disk power-on lifetime: 1986 hours (82 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 fe 00 00 0f e5 7c 48 40 00 Error: UNC at LBA = 0x0fe57c48 = 266697800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 e0 00 00 0f e5 7c f8 40 08 03:28:28.621 READ FPDMA QUEUED 60 01 00 00 d8 00 00 0f e5 7b f8 40 08 03:28:28.620 READ FPDMA QUEUED 60 01 00 00 d0 00 00 0f e5 7a f8 40 08 03:28:28.619 READ FPDMA QUEUED 60 01 00 00 c8 00 00 0f e5 79 f8 40 08 03:28:28.619 READ FPDMA QUEUED 60 01 00 00 c0 00 00 0f e5 78 f8 40 08 03:28:28.618 READ FPDMA QUEUED Error 98 [1] occurred at disk power-on lifetime: 1962 hours (81 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 5e 44 79 90 40 00 Error: UNC at LBA = 0x5e447990 = 1581545872 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 5e 44 79 90 40 08 00:32:13.134 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:32:13.007 FLUSH CACHE EXT 61 00 08 00 00 00 00 48 42 49 20 40 08 00:32:13.007 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:32:12.991 FLUSH CACHE EXT 61 00 20 00 00 00 00 48 42 49 00 40 08 00:32:12.991 WRITE FPDMA QUEUED Error 97 [0] occurred at disk power-on lifetime: 1962 hours (81 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 64 bd 85 30 40 00 Error: WP at LBA = 0x64bd8530 = 1690142000 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 08 00 18 00 00 48 41 70 08 40 08 00:01:03.541 WRITE FPDMA QUEUED 61 00 08 00 10 00 00 64 c1 c2 50 40 08 00:01:03.540 WRITE FPDMA QUEUED 60 00 20 00 08 00 00 5c c5 3c 28 40 08 00:01:03.540 READ FPDMA QUEUED 60 00 b0 00 00 00 00 64 bd 85 28 40 08 00:01:01.692 READ FPDMA QUEUED 60 00 08 00 20 00 00 64 bd 85 20 40 08 00:01:01.684 READ FPDMA QUEUED Error 96 [23] occurred at disk power-on lifetime: 1962 hours (81 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 5b bd 77 78 40 00 Error: UNC at LBA = 0x5bbd7778 = 1539143544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 08 00 00 5b fe 81 60 40 08 00:02:41.538 READ FPDMA QUEUED 60 01 08 00 00 00 00 5b bd 77 00 40 08 00:02:41.537 READ FPDMA QUEUED 60 00 08 00 00 00 00 5c fe 73 c8 40 08 00:02:41.215 READ FPDMA QUEUED 60 00 08 00 00 00 00 5b fe 81 58 40 08 00:02:41.197 READ FPDMA QUEUED 60 00 08 00 00 00 00 35 02 19 90 40 08 00:02:41.197 READ FPDMA QUEUED Error 95 [22] occurred at disk power-on lifetime: 1962 hours (81 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 64 c5 9c 50 40 00 Error: UNC at LBA = 0x64c59c50 = 1690672208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 20 00 00 2c 41 ce d0 40 08 00:01:16.771 READ FPDMA QUEUED 60 01 00 00 18 00 00 64 c5 9c 40 40 08 00:01:16.771 READ FPDMA QUEUED 61 00 08 00 10 00 00 67 55 e0 20 40 08 00:01:16.771 WRITE FPDMA QUEUED 61 01 88 00 08 00 00 48 41 74 a8 40 08 00:01:16.771 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 64 c1 c2 50 40 08 00:01:16.771 WRITE FPDMA QUEUED Error 94 [21] occurred at disk power-on lifetime: 1962 hours (81 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 64 c5 9d 20 40 00 Error: UNC at LBA = 0x64c59d20 = 1690672416 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 2c 41 ce d0 40 08 00:00:59.456 READ FPDMA QUEUED 60 01 00 00 08 00 00 64 c5 9c 40 40 08 00:00:59.455 READ FPDMA QUEUED 60 00 48 00 00 00 00 5d 02 0c c0 40 08 00:00:59.455 READ FPDMA QUEUED 60 00 20 00 08 00 00 5d 02 0c a0 40 08 00:00:59.442 READ FPDMA QUEUED 60 00 08 00 00 00 00 64 c1 bf a0 40 08 00:00:59.442 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: 48/48 Celsius Lifetime Min/Max Temperature: 22/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (330) Index Estimated Time Temperature Celsius 331 2016-01-27 14:24 46 *************************** 332 2016-01-27 14:25 46 *************************** 333 2016-01-27 14:26 47 **************************** ... ..( 46 skipped). .. **************************** 380 2016-01-27 15:13 47 **************************** 381 2016-01-27 15:14 46 *************************** ... ..( 25 skipped). .. *************************** 407 2016-01-27 15:40 46 *************************** 408 2016-01-27 15:41 ? - 409 2016-01-27 15:42 47 **************************** ... ..( 5 skipped). .. **************************** 415 2016-01-27 15:48 47 **************************** 416 2016-01-27 15:49 48 ***************************** ... ..( 36 skipped). .. ***************************** 453 2016-01-27 16:26 48 ***************************** 454 2016-01-27 16:27 ? - 455 2016-01-27 16:28 48 ***************************** ... ..( 24 skipped). .. ***************************** 2 2016-01-27 16:53 48 ***************************** 3 2016-01-27 16:54 41 ********************** ... ..( 3 skipped). .. ********************** 7 2016-01-27 16:58 41 ********************** 8 2016-01-27 16:59 42 *********************** ... ..( 2 skipped). .. *********************** 11 2016-01-27 17:02 42 *********************** 12 2016-01-27 17:03 43 ************************ ... ..( 8 skipped). .. ************************ 21 2016-01-27 17:12 43 ************************ 22 2016-01-27 17:13 44 ************************* ... ..( 3 skipped). .. ************************* 26 2016-01-27 17:17 44 ************************* 27 2016-01-27 17:18 45 ************************** ... ..( 11 skipped). .. ************************** 39 2016-01-27 17:30 45 ************************** 40 2016-01-27 17:31 46 *************************** ... ..( 26 skipped). .. *************************** 67 2016-01-27 17:58 46 *************************** 68 2016-01-27 17:59 47 **************************** ... ..( 44 skipped). .. **************************** 113 2016-01-27 18:44 47 **************************** 114 2016-01-27 18:45 48 ***************************** ... ..( 46 skipped). .. ***************************** 161 2016-01-27 19:32 48 ***************************** 162 2016-01-27 19:33 47 **************************** ... ..( 97 skipped). .. **************************** 260 2016-01-27 21:11 47 **************************** 261 2016-01-27 21:12 ? - 262 2016-01-27 21:13 26 ******* 263 2016-01-27 21:14 26 ******* 264 2016-01-27 21:15 27 ******** 265 2016-01-27 21:16 28 ********* 266 2016-01-27 21:17 29 ********** 267 2016-01-27 21:18 ? - 268 2016-01-27 21:19 30 *********** 269 2016-01-27 21:20 30 *********** 270 2016-01-27 21:21 31 ************ 271 2016-01-27 21:22 31 ************ 272 2016-01-27 21:23 32 ************* 273 2016-01-27 21:24 32 ************* 274 2016-01-27 21:25 33 ************** 275 2016-01-27 21:26 33 ************** 276 2016-01-27 21:27 34 *************** 277 2016-01-27 21:28 35 **************** 278 2016-01-27 21:29 35 **************** 279 2016-01-27 21:30 36 ***************** 280 2016-01-27 21:31 36 ***************** 281 2016-01-27 21:32 37 ****************** ... ..( 2 skipped). .. ****************** 284 2016-01-27 21:35 37 ****************** 285 2016-01-27 21:36 38 ******************* 286 2016-01-27 21:37 39 ******************** ... ..( 2 skipped). .. ******************** 289 2016-01-27 21:40 39 ******************** 290 2016-01-27 21:41 40 ********************* ... ..( 2 skipped). .. ********************* 293 2016-01-27 21:44 40 ********************* 294 2016-01-27 21:45 41 ********************** ... ..( 2 skipped). .. ********************** 297 2016-01-27 21:48 41 ********************** 298 2016-01-27 21:49 42 *********************** ... ..( 2 skipped). .. *********************** 301 2016-01-27 21:52 42 *********************** 302 2016-01-27 21:53 43 ************************ ... ..( 3 skipped). .. ************************ 306 2016-01-27 21:57 43 ************************ 307 2016-01-27 21:58 44 ************************* ... ..( 4 skipped). .. ************************* 312 2016-01-27 22:03 44 ************************* 313 2016-01-27 22:04 45 ************************** ... ..( 9 skipped). .. ************************** 323 2016-01-27 22:14 45 ************************** 324 2016-01-27 22:15 46 *************************** ... ..( 5 skipped). .. *************************** 330 2016-01-27 22:21 46 *************************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1605 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 Device Model: Maxtor 6Y080L0 Serial Number: -- Firmware Version: YAR41BW0 User Capacity: 81 964 302 336 bytes [81,9 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Wed Jan 27 22:21:14 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 182) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 40) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 200 198 063 - 17199 4 Start_Stop_Count -O--CK 251 251 000 - 4978 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0 6 Read_Channel_Margin P----- 253 253 100 - 0 7 Seek_Error_Rate -O-R-- 253 252 000 - 0 8 Seek_Time_Performance POS--K 253 245 187 - 52010 9 Power_On_Minutes -O--CK 179 179 000 - 743h+33m 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 12 Power_Cycle_Count -O--CK 240 240 000 - 5184 192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 193 Load_Cycle_Count -O--CK 253 253 000 - 0 194 Temperature_Celsius -O--CK 253 253 000 - 42 195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 4349 196 Reallocated_Event_Count ---R-- 253 253 000 - 0 197 Current_Pending_Sector ---R-- 253 253 000 - 0 198 Offline_Uncorrectable ---R-- 253 253 000 - 0 199 UDMA_CRC_Error_Count ---R-- 014 001 000 - 978 200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 251 000 - 9 202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0 203 Run_Out_Cancel PO-R-- 253 252 180 - 0 204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 207 Spin_High_Current -O-R-K 253 252 000 - 0 208 Spin_Buzz -O-R-K 253 252 000 - 0 209 Offline_Seek_Performnce --S--K 201 156 000 - 0 99 Unknown_Attribute --S--- 253 253 000 - 0 100 Unknown_Attribute --S--- 253 253 000 - 0 101 Unknown_Attribute --S--- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read GP Log Directory failed SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 Warning: ATA error count 12538 inconsistent with error log pointer 5 ATA Error Count: 12538 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12538 occurred at disk power-on lifetime: 24247 hours (1010 days + 7 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 3f 00 60 e0 Error: ICRC, ABRT at LBA = 0x0060003f = 6291519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 3f 00 60 e0 00 00:07:47.920 READ DMA c8 03 01 3f 00 00 e0 00 00:07:47.920 READ DMA c8 03 01 3f 00 00 e0 00 00:07:47.440 READ DMA c8 03 01 3f 00 00 e0 00 00:07:47.440 READ DMA c8 03 01 00 00 00 e0 00 00:07:47.440 READ DMA Error 12537 occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 3f 00 60 e0 Error: ICRC, ABRT at LBA = 0x0060003f = 6291519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 3f 00 60 e0 00 00:11:48.064 READ DMA c8 03 01 3f 00 00 e0 00 00:11:48.048 READ DMA c8 03 01 3f 00 00 e0 00 00:11:46.208 READ DMA c8 03 01 3f 00 00 e0 00 00:11:46.208 READ DMA c8 03 01 00 00 00 e0 00 00:11:46.208 READ DMA Error 12536 occurred at disk power-on lifetime: 24118 hours (1004 days + 22 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 3f 00 60 e0 Error: ICRC, ABRT at LBA = 0x0060003f = 6291519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 3f 00 60 e0 00 00:16:08.064 READ DMA c8 03 01 3f 00 00 e0 00 00:16:08.048 READ DMA c8 03 01 3f 00 00 e0 00 00:16:03.472 READ DMA c8 03 01 3f 00 00 e0 00 00:16:03.472 READ DMA c8 03 01 00 00 00 e0 00 00:16:03.472 READ DMA Error 12535 occurred at disk power-on lifetime: 24103 hours (1004 days + 7 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 3f 00 60 e0 Error: ICRC, ABRT at LBA = 0x0060003f = 6291519 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 3f 00 60 e0 00 14:58:47.008 READ DMA c8 03 01 3f 00 00 e0 00 14:58:46.992 READ DMA c8 03 01 3f 00 00 e0 00 14:58:46.672 READ DMA c8 03 01 3f 00 00 e0 00 14:58:46.672 READ DMA c8 03 01 00 00 00 e0 00 14:58:46.672 READ DMA Error 12534 occurred at disk power-on lifetime: 24018 hours (1000 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 d7 a6 ff e2 Error: ICRC, ABRT at LBA = 0x02ffa6d7 = 50308823 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 08 d7 a6 ff e2 08 03:08:09.520 WRITE DMA f8 00 00 00 00 00 e0 08 03:08:09.504 READ NATIVE MAX ADDRESS [OBS-ACS-3] ec 00 00 00 00 00 a0 0a 03:08:09.488 IDENTIFY DEVICE ef 03 45 00 00 00 a0 0a 03:08:09.488 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 03:08:09.488 READ NATIVE MAX ADDRESS [OBS-ACS-3] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdc === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 Device Model: Maxtor 6Y080P0 Serial Number: -- Firmware Version: YAR41BW0 User Capacity: 81 964 302 336 bytes [81,9 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Wed Jan 27 22:21:14 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 241) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 226 224 063 - 8020 4 Start_Stop_Count -O--CK 251 251 000 - 4272 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0 6 Read_Channel_Margin P----- 253 253 100 - 0 7 Seek_Error_Rate -O-R-- 253 252 000 - 0 8 Seek_Time_Performance POS--K 253 235 187 - 47957 9 Power_On_Minutes -O--CK 183 183 000 - 356h+40m 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 12 Power_Cycle_Count -O--CK 242 242 000 - 4383 192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 193 Load_Cycle_Count -O--CK 253 253 000 - 0 194 Temperature_Celsius -O--CK 253 253 000 - 47 195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 8590 196 Reallocated_Event_Count ---R-- 253 253 000 - 0 197 Current_Pending_Sector ---R-- 253 253 000 - 0 198 Offline_Uncorrectable ---R-- 253 253 000 - 0 199 UDMA_CRC_Error_Count ---R-- 001 001 000 - 5493 200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 252 000 - 2 202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0 203 Run_Out_Cancel PO-R-- 253 252 180 - 1 204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 207 Spin_High_Current -O-R-K 253 252 000 - 0 208 Spin_Buzz -O-R-K 253 252 000 - 0 209 Offline_Seek_Performnce --S--K 190 142 000 - 0 99 Unknown_Attribute --S--- 253 253 000 - 0 100 Unknown_Attribute --S--- 253 253 000 - 0 101 Unknown_Attribute --S--- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read GP Log Directory failed SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 Warning: ATA error count 6336 inconsistent with error log pointer 5 ATA Error Count: 6336 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6336 occurred at disk power-on lifetime: 22782 hours (949 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 0e f7 0c f0 Error: ICRC, ABRT at LBA = 0x000cf70e = 849678 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 0e f7 0c f0 00 00:09:48.576 READ DMA c8 03 01 0e f7 0c f0 04 00:09:48.560 READ DMA c8 03 01 0e f7 0c f0 00 00:09:48.512 READ DMA c8 03 01 0e f7 0c f0 04 00:09:48.496 READ DMA c8 03 01 0e f7 0c f0 00 00:09:48.448 READ DMA Error 6335 occurred at disk power-on lifetime: 22782 hours (949 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 0e f7 0c f0 Error: ICRC, ABRT at LBA = 0x000cf70e = 849678 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 0e f7 0c f0 00 00:09:48.512 READ DMA c8 03 01 0e f7 0c f0 04 00:09:48.496 READ DMA c8 03 01 0e f7 0c f0 00 00:09:48.448 READ DMA c8 03 01 0e f7 0c f0 04 00:09:48.432 READ DMA c8 03 01 0e f7 0c f0 00 00:09:48.384 READ DMA Error 6334 occurred at disk power-on lifetime: 22782 hours (949 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 0e f7 0c f0 Error: ICRC, ABRT at LBA = 0x000cf70e = 849678 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 0e f7 0c f0 00 00:09:48.448 READ DMA c8 03 01 0e f7 0c f0 04 00:09:48.432 READ DMA c8 03 01 0e f7 0c f0 00 00:09:48.384 READ DMA c8 03 01 0d f7 0c f0 00 00:09:48.384 READ DMA c8 03 01 0c f7 0c f0 00 00:09:48.384 READ DMA Error 6333 occurred at disk power-on lifetime: 22782 hours (949 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 0e f7 0c f0 Error: ICRC, ABRT at LBA = 0x000cf70e = 849678 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 0e f7 0c f0 00 00:09:48.384 READ DMA c8 03 01 0d f7 0c f0 00 00:09:48.384 READ DMA c8 03 01 0c f7 0c f0 00 00:09:48.384 READ DMA c8 03 01 0b f7 0c f0 00 00:09:48.384 READ DMA c8 03 01 0a f7 0c f0 00 00:09:48.384 READ DMA Error 6332 occurred at disk power-on lifetime: 22213 hours (925 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 9f 14 60 f0 Error: ICRC, ABRT at LBA = 0x0060149f = 6296735 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 9f 14 60 f0 00 00:04:28.064 READ DMA c8 03 08 9f 14 60 f0 04 00:04:28.048 READ DMA c8 03 08 9f 14 60 f0 00 00:04:28.000 READ DMA c8 03 08 6f 00 60 f0 00 00:04:28.000 READ DMA c8 03 08 cf 10 60 f0 00 00:04:28.000 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported