/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST3120022A Serial Number: -- Firmware Version: 8.01 User Capacity: 120 033 041 920 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu Jul 21 00:09:06 2016 SAMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 060 052 006 - 74830284 3 Spin_Up_Time PO---- 096 096 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2337 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 261971129 9 Power_On_Hours -O--CK 072 072 000 - 25316 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 092 092 020 - 8635 194 Temperature_Celsius -O---K 048 065 000 - 48 195 Hardware_ECC_Recovered -O-RC- 060 051 000 - 74830284 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 162 000 - 349 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xff GPL - 24064 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 391 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 391 [10] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 ca 00 d7 28 f9 00 00:26:41.715 READ DMA c8 00 00 00 a0 00 09 c9 00 d7 88 f9 00 00:26:41.713 READ DMA c8 00 00 00 a0 00 09 c8 00 d7 e8 f9 00 00:26:41.708 READ DMA c8 00 00 00 a0 00 09 c8 00 d7 48 f9 00 00:26:41.707 READ DMA c8 00 00 00 a0 00 09 c7 00 d7 a8 f9 00 00:26:41.705 READ DMA Error 390 [9] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 c2 00 d7 08 f9 00 00:26:40.975 READ DMA c8 00 00 00 a0 00 09 c1 00 d7 68 f9 00 00:26:40.974 READ DMA c8 00 00 00 a0 00 09 c0 00 d7 c8 f9 00 00:26:40.972 READ DMA c8 00 00 00 a0 00 09 c0 00 d7 28 f9 00 00:26:40.970 READ DMA c8 00 00 00 a0 00 09 bf 00 d7 88 f9 00 00:26:40.968 READ DMA Error 389 [8] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 b6 00 d7 c8 f9 00 00:26:40.236 READ DMA c8 00 00 00 a0 00 09 b6 00 d7 28 f9 00 00:26:40.234 READ DMA c8 00 00 00 a0 00 09 b5 00 d7 88 f9 00 00:26:40.233 READ DMA c8 00 00 00 a0 00 09 b4 00 d7 e8 f9 00 00:26:40.232 READ DMA c8 00 00 00 a0 00 09 b4 00 d7 48 f9 00 00:26:40.229 READ DMA Error 388 [7] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 d1 00 d7 a8 f9 00 00:26:42.564 READ DMA c8 00 00 00 a0 00 09 d1 00 d7 08 f9 00 00:26:42.562 READ DMA c8 00 00 00 a0 00 09 d0 00 d7 68 f9 00 00:26:42.547 READ DMA c8 00 00 00 a0 00 09 cf 00 d7 c8 f9 00 00:26:42.545 READ DMA c8 00 00 00 a0 00 09 cf 00 d7 28 f9 00 00:26:42.531 READ DMA Error 387 [6] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 ca 00 d7 28 f9 00 00:26:41.715 READ DMA c8 00 00 00 a0 00 09 c9 00 d7 88 f9 00 00:26:41.713 READ DMA c8 00 00 00 a0 00 09 c8 00 d7 e8 f9 00 00:26:41.708 READ DMA c8 00 00 00 a0 00 09 c8 00 d7 48 f9 00 00:26:41.707 READ DMA c8 00 00 00 a0 00 09 c7 00 d7 a8 f9 00 00:26:41.705 READ DMA Error 386 [5] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 c2 00 d7 08 f9 00 00:26:40.975 READ DMA c8 00 00 00 a0 00 09 c1 00 d7 68 f9 00 00:26:40.974 READ DMA c8 00 00 00 a0 00 09 c0 00 d7 c8 f9 00 00:26:40.972 READ DMA c8 00 00 00 a0 00 09 c0 00 d7 28 f9 00 00:26:40.970 READ DMA c8 00 00 00 a0 00 09 bf 00 d7 88 f9 00 00:26:40.968 READ DMA Error 385 [4] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 b6 00 d7 c8 f9 00 00:26:40.236 READ DMA c8 00 00 00 a0 00 09 b6 00 d7 28 f9 00 00:26:40.234 READ DMA c8 00 00 00 a0 00 09 b5 00 d7 88 f9 00 00:26:40.233 READ DMA c8 00 00 00 a0 00 09 b4 00 d7 e8 f9 00 00:26:40.232 READ DMA c8 00 00 00 a0 00 09 b4 00 d7 48 f9 00 00:26:40.229 READ DMA Error 384 [3] occurred at disk power-on lifetime: 24168 hours (1007 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 d7 00 00 00 00 00 f9 00 Error: ICRC, ABRT 1 sectors at LBA = 0xd70009000000 = 236395150966784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 a0 00 09 d1 00 d7 a8 f9 00 00:26:42.564 READ DMA c8 00 00 00 a0 00 09 d1 00 d7 08 f9 00 00:26:42.562 READ DMA c8 00 00 00 a0 00 09 d0 00 d7 68 f9 00 00:26:42.547 READ DMA c8 00 00 00 a0 00 09 cf 00 d7 c8 f9 00 00:26:42.545 READ DMA c8 00 00 00 a0 00 09 cf 00 d7 28 f9 00 00:26:42.531 READ DMA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 23994 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax 17 Device Model: Maxtor 6G160E0 Serial Number: -- LU WWN Device Id: 0 150500 ... Firmware Version: KA101V00 User Capacity: 160 041 885 696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Thu Jul 21 00:09:06 2016 SAMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 192 (intermediate), recommended: 192 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2041) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 62) minutes. SMART Attributes Data Structure revision number: 32 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 100 100 025 - 17871 4 Start_Stop_Count -O--CK 100 100 000 - 1946 5 Reallocated_Sector_Ct PO--CK 100 100 025 - 0 7 Seek_Error_Rate -O-R-- 100 100 000 - 0 8 Seek_Time_Performance POS--K 099 097 074 - 56549 9 Power_On_Hours -O--CK 093 093 000 - 6749 10 Spin_Retry_Count PO-R-K 100 100 004 - 0 11 Calibration_Retry_Count PO-R-K 100 100 070 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4910 184 End-to-End_Error -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 090 090 000 - 10 188 Command_Timeout -O--CK 001 001 000 - 68720657387 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 054 049 040 - 46 (Min/Max 29/48) 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1697 193 Load_Cycle_Count -O--CK 100 100 000 - 3218 194 Temperature_Celsius -O--CK 039 253 000 - 46 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 746 196 Reallocated_Event_Count ---R-- 100 100 000 - 0 197 Current_Pending_Sector ---R-- 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count ---R-- 001 001 000 - 3583 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 203 Run_Out_Cancel PO-R-- 100 100 027 - 0 207 Spin_High_Current -O-R-K 100 100 000 - 0 208 Spin_Buzz -O-R-K 100 100 000 - 0 210 Unknown_Attribute -O--CK 100 100 000 - 0 211 Unknown_Attribute -O--CK 100 100 000 - 0 212 Unknown_Attribute -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 4 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log SMART Extended Comprehensive Error Log Version: 1 (4 sectors) Device Error Count: 315 (device log contains only the most recent 16 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 315 [10] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT Error 314 [9] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT Error 313 [8] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT Error 312 [7] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT Error 311 [6] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT Error 310 [5] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT Error 309 [4] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT Error 308 [3] occurred at disk power-on lifetime: 5868 hours (244 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 08 00 00 de 3f 46 97 e0 00 Error: ABRT 8 sectors at LBA = 0xde3f4697 = 3728688791 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 10 00 00 01 07 46 9f e0 00 02:24:47.373 READ DMA EXT 25 00 00 00 02 00 00 01 07 46 99 e0 00 02:24:47.373 READ DMA EXT 25 00 00 01 00 00 00 01 07 55 50 e0 00 02:24:47.371 READ DMA EXT 25 00 00 01 00 00 00 01 07 54 50 e0 00 02:24:47.370 READ DMA EXT 25 00 00 01 00 00 00 01 07 53 50 e0 00 02:24:47.367 READ DMA EXT SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 56 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdc === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue (SATA) Device Model: WDC WD3200AAKS-00VYA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 12.01B02 User Capacity: 320 071 851 520 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Thu Jul 21 00:09:08 2016 SAMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 104) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 155 143 021 - 5241 4 Start_Stop_Count -O--CK 094 094 000 - 6189 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 056 056 000 - 32326 10 Spin_Retry_Count -O--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5913 192 Power-Off_Retract_Count -O--CK 195 195 000 - 4317 193 Load_Cycle_Count -O--CK 198 198 000 - 6199 194 Temperature_Celsius -O---K 100 087 000 - 47 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 8 200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 47 Celsius Power Cycle Min/Max Temperature: 28/47 Celsius Lifetime Min/Max Temperature: 27/60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (99) Index Estimated Time Temperature Celsius 100 2016-07-20 22:02 47 **************************** ... ..( 83 skipped). .. **************************** 56 2016-07-20 23:26 47 **************************** 57 2016-07-20 23:27 46 *************************** ... ..( 33 skipped). .. *************************** 91 2016-07-21 00:01 46 *************************** 92 2016-07-21 00:02 47 **************************** ... ..( 6 skipped). .. **************************** 99 2016-07-21 00:09 47 **************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x8000 4 11084 Vendor specific