/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-22MFCA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 20 02:51:26 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 115) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 198 051 - 0 3 Spin_Up_Time POS--K 172 166 021 - 2391 4 Start_Stop_Count -O--CK 100 100 000 - 950 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 1 9 Power_On_Hours -O--CK 062 062 000 - 28099 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 524 192 Power-Off_Retract_Count -O--CK 200 200 000 - 366 193 Load_Cycle_Count -O--CK 200 200 000 - 1162 194 Temperature_Celsius -O---K 105 089 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 200 200 000 - 1 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 91 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 91 [18] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 98 00 00 14 24 c3 00 40 00 00:19:48.897 READ FPDMA QUEUED 60 01 00 00 90 00 00 14 24 c2 00 40 00 00:19:48.896 READ FPDMA QUEUED 60 01 00 00 88 00 00 14 24 c1 00 40 00 00:19:48.895 READ FPDMA QUEUED 60 01 00 00 80 00 00 14 24 c0 00 40 00 00:19:48.895 READ FPDMA QUEUED 60 01 00 00 78 00 00 14 24 bf 00 40 00 00:19:48.894 READ FPDMA QUEUED Error 90 [17] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 f8 00 00 14 24 c3 00 40 00 00:19:44.951 READ FPDMA QUEUED 60 01 00 00 f0 00 00 14 24 c2 00 40 00 00:19:44.951 READ FPDMA QUEUED 60 01 00 00 e8 00 00 14 24 c1 00 40 00 00:19:44.950 READ FPDMA QUEUED 60 01 00 00 e0 00 00 14 24 c0 00 40 00 00:19:44.950 READ FPDMA QUEUED 60 01 00 00 d8 00 00 14 24 bf 00 40 00 00:19:44.949 READ FPDMA QUEUED Error 89 [16] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 48 00 00 14 24 c3 d8 40 00 00:00:01.251 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:01.236 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 00 00 00:00:01.220 SET FEATURES [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 00 00 00:00:01.204 SET FEATURES [Enable SATA feature] ef 00 82 00 00 00 00 00 00 00 00 00 00 00:00:01.189 SET FEATURES [Disable write cache] Error 88 [15] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 80 00 00 14 24 c3 d8 40 00 00:47:21.858 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 00:47:21.848 READ LOG EXT 60 00 08 00 78 00 00 14 24 c3 d8 40 00 00:47:17.962 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 00:47:17.952 READ LOG EXT 60 00 08 00 70 00 00 14 24 c3 d8 40 00 00:47:14.064 READ FPDMA QUEUED Error 87 [14] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 78 00 00 14 24 c3 d8 40 00 00:47:17.962 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 00:47:17.952 READ LOG EXT 60 00 08 00 70 00 00 14 24 c3 d8 40 00 00:47:14.064 READ FPDMA QUEUED 60 00 08 00 68 00 00 14 22 ac a0 40 00 00:47:01.966 READ FPDMA QUEUED 60 00 60 00 60 00 00 14 22 ac 40 40 00 00:47:01.965 READ FPDMA QUEUED Error 86 [13] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 70 00 00 14 24 c3 d8 40 00 00:47:14.064 READ FPDMA QUEUED 60 00 08 00 68 00 00 14 22 ac a0 40 00 00:47:01.966 READ FPDMA QUEUED 60 00 60 00 60 00 00 14 22 ac 40 40 00 00:47:01.965 READ FPDMA QUEUED 60 00 40 00 58 00 00 14 22 ac 00 40 00 00:47:01.949 READ FPDMA QUEUED 60 00 08 00 50 00 00 0e 26 b0 08 40 00 00:46:53.383 READ FPDMA QUEUED Error 85 [12] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 08 00 00 14 24 c3 d8 40 00 00:41:49.469 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 00:41:49.157 READ LOG EXT 60 00 08 00 00 00 00 14 24 c3 d8 40 00 00:41:45.231 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 00:41:45.220 READ LOG EXT 60 00 08 00 f8 00 00 14 24 c3 d8 40 00 00:41:41.305 READ FPDMA QUEUED Error 84 [11] occurred at disk power-on lifetime: 25791 hours (1074 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 14 24 c3 d8 40 00 Error: UNC at LBA = 0x1424c3d8 = 337953752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 14 24 c3 d8 40 00 00:41:45.231 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 00:41:45.220 READ LOG EXT 60 00 08 00 f8 00 00 14 24 c3 d8 40 00 00:41:41.305 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 00:41:41.283 READ LOG EXT 60 00 08 00 f0 00 00 14 24 c3 d8 40 00 00:41:36.944 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 37/39 Celsius Lifetime Min/Max Temperature: 3/54 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (243) Index Estimated Time Temperature Celsius 244 2022-07-19 18:54 39 ******************** ... ..( 70 skipped). .. ******************** 315 2022-07-19 20:05 39 ******************** 316 2022-07-19 20:06 38 ******************* ... ..( 18 skipped). .. ******************* 335 2022-07-19 20:25 38 ******************* 336 2022-07-19 20:26 39 ******************** ... ..( 9 skipped). .. ******************** 346 2022-07-19 20:36 39 ******************** 347 2022-07-19 20:37 38 ******************* ... ..( 3 skipped). .. ******************* 351 2022-07-19 20:41 38 ******************* 352 2022-07-19 20:42 39 ******************** ... ..( 3 skipped). .. ******************** 356 2022-07-19 20:46 39 ******************** 357 2022-07-19 20:47 38 ******************* ... ..( 5 skipped). .. ******************* 363 2022-07-19 20:53 38 ******************* 364 2022-07-19 20:54 39 ******************** ... ..( 13 skipped). .. ******************** 378 2022-07-19 21:08 39 ******************** 379 2022-07-19 21:09 38 ******************* ... ..( 54 skipped). .. ******************* 434 2022-07-19 22:04 38 ******************* 435 2022-07-19 22:05 37 ****************** ... ..( 5 skipped). .. ****************** 441 2022-07-19 22:11 37 ****************** 442 2022-07-19 22:12 39 ******************** 443 2022-07-19 22:13 39 ******************** 444 2022-07-19 22:14 38 ******************* ... ..( 24 skipped). .. ******************* 469 2022-07-19 22:39 38 ******************* 470 2022-07-19 22:40 37 ****************** 471 2022-07-19 22:41 38 ******************* 472 2022-07-19 22:42 37 ****************** ... ..( 10 skipped). .. ****************** 5 2022-07-19 22:53 37 ****************** 6 2022-07-19 22:54 ? - 7 2022-07-19 22:55 38 ******************* 8 2022-07-19 22:56 37 ****************** ... ..( 6 skipped). .. ****************** 15 2022-07-19 23:03 37 ****************** 16 2022-07-19 23:04 38 ******************* ... ..( 31 skipped). .. ******************* 48 2022-07-19 23:36 38 ******************* 49 2022-07-19 23:37 39 ******************** 50 2022-07-19 23:38 38 ******************* ... ..( 8 skipped). .. ******************* 59 2022-07-19 23:47 38 ******************* 60 2022-07-19 23:48 42 *********************** ... ..( 4 skipped). .. *********************** 65 2022-07-19 23:53 42 *********************** 66 2022-07-19 23:54 41 ********************** ... ..( 29 skipped). .. ********************** 96 2022-07-20 00:24 41 ********************** 97 2022-07-20 00:25 40 ********************* ... ..( 66 skipped). .. ********************* 164 2022-07-20 01:32 40 ********************* 165 2022-07-20 01:33 39 ******************** ... ..( 77 skipped). .. ******************** 243 2022-07-20 02:51 39 ******************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3323 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: Patriot Blast Serial Number: -- Firmware Version: SAFM12.2 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 20 02:51:26 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 2 9 Power_On_Hours -O--C- 100 100 000 - 17425 12 Power_Cycle_Count -O--C- 100 100 000 - 1385 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 2600 170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 010 - 0/227 173 MaxAvgErase_Ct -O--C- 100 100 000 - 242 (Average 41) 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 533 194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30) 218 CRC_Error_Count PO-R-- 100 100 050 - 2576 231 SSD_Life_Left PO--C- 100 100 000 - 59 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 7168 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 6 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 14254 hours (593 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 00 10 28 00 Error: UNC Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:49:25.650 READ LOG EXT 60 00 08 00 a0 00 00 06 cf 97 b8 40 00 00:49:25.649 READ FPDMA QUEUED 60 00 08 00 98 00 00 06 cf 97 b0 40 00 00:49:25.649 READ FPDMA QUEUED 60 00 08 00 90 00 00 06 cf 97 a8 40 00 00:49:25.649 READ FPDMA QUEUED 60 00 08 00 80 00 00 06 cf 97 98 40 00 00:49:25.649 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 14254 hours (593 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 00 10 28 00 Error: UNC Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:49:25.645 READ LOG EXT 60 00 80 00 60 00 00 06 cf 97 80 40 00 00:49:25.644 READ FPDMA QUEUED 61 00 80 00 58 00 00 06 cf 97 00 40 00 00:49:25.644 WRITE FPDMA QUEUED 61 00 80 00 48 00 00 05 54 8a 00 40 00 00:49:25.644 WRITE FPDMA QUEUED 60 00 80 00 40 00 00 06 cf 97 00 40 00 00:49:25.642 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 1385 --- Lifetime Power-On Resets 0x01 0x010 4 17425 --- Power-on Hours 0x01 0x018 6 15033307323 --- Logical Sectors Written 0x01 0x020 6 270369443 --- Number of Write Commands 0x01 0x028 6 14515015863 --- Logical Sectors Read 0x01 0x030 6 223876466 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 874 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 32 --- Average Short Term Temperature 0x05 0x018 1 32 --- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 5 --- Lowest Temperature 0x05 0x030 1 50 --- Highest Average Short Term Temperature 0x05 0x038 1 16 --- Lowest Average Short Term Temperature 0x05 0x040 1 50 --- Highest Average Long Term Temperature 0x05 0x048 1 16 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 50 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 113584 --- Number of Hardware Resets 0x06 0x018 4 2574 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 242 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD50NPZZ-00A9JT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 5,000,981,078,016 bytes [5.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 20 02:51:26 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11100) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 153) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 253 021 - 4866 4 Start_Stop_Count -O--CK 099 099 000 - 1139 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1248 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 107 192 Power-Off_Retract_Count -O--CK 200 200 000 - 39 193 Load_Cycle_Count -O--CK 199 199 000 - 5132 194 Temperature_Celsius -O---K 116 098 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 289 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 82 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 24/47 Celsius Lifetime Min/Max Temperature: 11/54 Celsius Specified Max Operating Temperature: 35 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (14) Index Estimated Time Temperature Celsius 15 2022-07-20 00:44 34 *************** 16 2022-07-20 00:45 ? - 17 2022-07-20 00:46 34 *************** 18 2022-07-20 00:47 33 ************** 19 2022-07-20 00:48 33 ************** 20 2022-07-20 00:49 34 *************** 21 2022-07-20 00:50 34 *************** 22 2022-07-20 00:51 34 *************** 23 2022-07-20 00:52 35 **************** ... ..( 3 skipped). .. **************** 27 2022-07-20 00:56 35 **************** 28 2022-07-20 00:57 ? - 29 2022-07-20 00:58 35 **************** 30 2022-07-20 00:59 34 *************** 31 2022-07-20 01:00 35 **************** ... ..( 3 skipped). .. **************** 35 2022-07-20 01:04 35 **************** 36 2022-07-20 01:05 36 ***************** ... ..( 6 skipped). .. ***************** 43 2022-07-20 01:12 36 ***************** 44 2022-07-20 01:13 35 **************** ... ..( 7 skipped). .. **************** 52 2022-07-20 01:21 35 **************** 53 2022-07-20 01:22 ? - 54 2022-07-20 01:23 35 **************** 55 2022-07-20 01:24 34 *************** 56 2022-07-20 01:25 34 *************** 57 2022-07-20 01:26 35 **************** ... ..( 12 skipped). .. **************** 70 2022-07-20 01:39 35 **************** 71 2022-07-20 01:40 34 *************** ... ..( 6 skipped). .. *************** 78 2022-07-20 01:47 34 *************** 79 2022-07-20 01:48 ? - 80 2022-07-20 01:49 34 *************** 81 2022-07-20 01:50 34 *************** 82 2022-07-20 01:51 34 *************** 83 2022-07-20 01:52 ? - 84 2022-07-20 01:53 34 *************** ... ..( 2 skipped). .. *************** 87 2022-07-20 01:56 34 *************** 88 2022-07-20 01:57 35 **************** ... ..( 11 skipped). .. **************** 100 2022-07-20 02:09 35 **************** 101 2022-07-20 02:10 34 *************** ... ..( 16 skipped). .. *************** 118 2022-07-20 02:27 34 *************** 119 2022-07-20 02:28 ? - 120 2022-07-20 02:29 34 *************** ... ..( 5 skipped). .. *************** 126 2022-07-20 02:35 34 *************** 127 2022-07-20 02:36 35 **************** ... ..( 3 skipped). .. **************** 3 2022-07-20 02:40 35 **************** 4 2022-07-20 02:41 ? - 5 2022-07-20 02:42 35 **************** 6 2022-07-20 02:43 34 *************** 7 2022-07-20 02:44 34 *************** 8 2022-07-20 02:45 35 **************** 9 2022-07-20 02:46 35 **************** 10 2022-07-20 02:47 35 **************** 11 2022-07-20 02:48 36 ***************** ... ..( 2 skipped). .. ***************** 14 2022-07-20 02:51 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 194 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 195 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 987293 Vendor specific