/dev/sda === START OF INFORMATION SECTION === Model Family: Plextor M3/M5 (Pro) Series SSDs Device Model: PLEXTOR PX-256M5Pro Serial Number: -- LU WWN Device Id: 0 250313 ... Add. Product Id: DC8020G0 Firmware Version: 1.08 User Capacity: 256 060 514 304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Aug 20 03:48:53 2015 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO---- 100 100 070 - 0 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 533 12 Power_Cycle_Count -O---- 100 100 000 - 729 177 Wear_Leveling_Count PO---- 100 100 000 - 332886 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 4 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 182 Erase_Fail_Count_Total PO---- 100 100 000 - 4 187 Reported_Uncorrect -O---- 100 100 000 - 0 192 Power-Off_Retract_Count PO---- 100 100 000 - 31 196 Reallocated_Event_Count PO---- 100 100 000 - 0 198 Offline_Uncorrectable PO---- 100 100 000 - 0 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 232 Available_Reservd_Space PO---- 100 100 010 - 0 241 Host_Writes_32MiB PO---- 100 100 000 - 96494 242 Host_Reads_32MiB PO---- 100 100 000 - 218372 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 0 SMART Log Directory Version 0 Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 1 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 0 No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 34817 - Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2015-08-20 01:41 ? - ... ..(126 skipped). .. - 0 2015-08-20 03:48 ? - SCT Error Recovery Control: Read: 2 (0,2 seconds) Write: 2 (0,2 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3160815AS Serial Number: -- Firmware Version: 4.AAB User Capacity: 160 041 885 696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Aug 20 03:48:53 2015 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 077 077 020 - 24550 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 087 060 030 - 472658662 9 Power_On_Hours -O--CK 088 088 000 - 11244 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 067 067 020 - 34147 187 Reported_Uncorrect -O--CK 001 001 000 - 731 189 High_Fly_Writes -O-RCK 098 098 000 - 2 190 Airflow_Temperature_Cel -O---K 056 035 045 Past 44 (Min/Max 43/44 #45) 194 Temperature_Celsius -O---K 044 065 000 - 44 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 083 063 000 - 203033577 197 Current_Pending_Sector -O--C- 001 001 000 - 4294967289 198 Offline_Uncorrectable ----C- 001 001 000 - 4294967289 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 733 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 733 [12] occurred at disk power-on lifetime: 8512 hours (354 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 eb 00 f4 9d e0 00 Error: UNC at LBA = 0xeb00f49d = 3942708381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 01 00 00 eb 00 f4 9d e0 00 01:29:00.940 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 01:29:00.880 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 01:29:00.875 IDENTIFY DEVICE ef 00 03 00 46 00 ff ff 00 ff ff a0 00 01:29:00.865 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 01:29:00.812 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 732 [11] occurred at disk power-on lifetime: 8512 hours (354 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 eb 00 f4 9d e0 00 Error: UNC at LBA = 0xeb00f49d = 3942708381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 05 00 00 eb 00 f4 9d e0 00 01:28:57.319 READ DMA e5 00 00 01 00 00 ff ff 00 ff ff 00 00 01:28:54.000 CHECK POWER MODE c8 00 00 00 80 00 00 ec 00 f4 a2 e0 00 01:28:54.000 READ DMA c8 00 00 00 80 00 00 ec 00 f4 22 e0 00 01:28:53.999 READ DMA c8 00 00 00 80 00 00 eb 00 f4 a2 e0 00 01:28:53.998 READ DMA Error 731 [10] occurred at disk power-on lifetime: 8512 hours (354 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 eb 00 f4 9d e0 00 Error: UNC at LBA = 0xeb00f49d = 3942708381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 80 00 00 eb 00 f4 22 e0 00 01:28:53.987 READ DMA c8 00 00 00 80 00 00 ea 00 f4 a2 e0 00 01:28:54.000 READ DMA c8 00 00 00 80 00 00 ea 00 f4 22 e0 00 01:28:54.000 READ DMA c8 00 00 00 80 00 00 e9 00 f4 a2 e0 00 01:28:53.999 READ DMA c8 00 00 00 80 00 00 e9 00 f4 22 e0 00 01:28:53.998 READ DMA Error 730 [9] occurred at disk power-on lifetime: 8512 hours (354 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 eb 00 f4 9d e0 00 Error: UNC at LBA = 0xeb00f49d = 3942708381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 eb 00 f4 98 e0 00 01:22:29.090 READ DMA e5 00 00 01 00 00 ff ff 00 ff ff 00 00 01:22:29.073 CHECK POWER MODE 27 00 00 00 00 00 00 00 00 00 00 e0 00 01:22:29.059 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 01:22:29.006 IDENTIFY DEVICE ef 00 03 00 46 00 ff ff 00 ff ff a0 00 01:22:29.001 SET FEATURES [Set transfer mode] Error 729 [8] occurred at disk power-on lifetime: 8512 hours (354 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 eb 00 f4 9d e0 00 Error: UNC at LBA = 0xeb00f49d = 3942708381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 eb 00 f4 98 e0 00 01:22:29.090 READ DMA c8 00 00 01 00 00 00 ec 00 f4 00 e0 00 01:22:29.073 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 01:22:29.059 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 01 00 00 ff ff 00 ff ff a0 00 01:22:29.006 IDENTIFY DEVICE ef 00 03 00 46 00 ff ff 00 ff ff a0 00 01:22:29.001 SET FEATURES [Set transfer mode] Error 728 [7] occurred at disk power-on lifetime: 8512 hours (354 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 eb 00 f4 9d e0 00 Error: UNC at LBA = 0xeb00f49d = 3942708381 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 01 00 00 00 eb 00 f4 00 e0 00 01:22:25.694 READ DMA c8 00 00 01 00 00 00 ea 00 f4 00 e0 00 01:22:25.690 READ DMA c8 00 00 01 00 00 00 e9 00 f4 00 e0 00 01:22:25.689 READ DMA c8 00 00 01 00 00 00 e8 00 f4 00 e0 00 01:22:25.688 READ DMA c8 00 00 01 00 00 00 e7 00 f4 00 e0 00 01:22:25.687 READ DMA Error 727 [6] occurred at disk power-on lifetime: 7753 hours (323 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6d 00 1f 5f e0 00 Error: UNC at LBA = 0x6d001f5f = 1828724575 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 6d 00 1f 5f e0 00 00:05:18.423 READ VERIFY SECTOR(S) EXT 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:05:15.125 READ DMA EXT 42 00 00 00 02 00 00 6d 00 1f 61 e0 00 00:05:15.118 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 6d 00 1f 5f e0 00 00:05:15.094 READ VERIFY SECTOR(S) EXT 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:05:11.807 READ DMA EXT Error 726 [5] occurred at disk power-on lifetime: 7753 hours (323 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6d 00 1f 5f e0 00 Error: UNC at LBA = 0x6d001f5f = 1828724575 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 02 00 00 6d 00 1f 5f e0 00 00:05:18.423 READ VERIFY SECTOR(S) EXT 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:05:15.125 READ DMA EXT 42 00 00 00 04 00 00 6d 00 1f 63 e0 00 00:05:15.118 READ VERIFY SECTOR(S) EXT 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:05:15.094 READ DMA EXT 42 00 00 00 04 00 00 6d 00 1f 5f e0 00 00:05:11.807 READ VERIFY SECTOR(S) EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 8512 - # 2 Extended offline Completed: read failure 90% 7783 82175625325469 # 3 Extended offline Completed: read failure 90% 7783 81857797745565 # 4 Short offline Completed: read failure 90% 7753 240616953104089 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 31 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 5 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000 Device Model: Hitachi HDS721075KLA330 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GK8OA51D User Capacity: 750 156 374 016 bytes [750 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 Local Time is: Thu Aug 20 03:48:54 2015 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11471) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 191) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 65536 2 Throughput_Performance P-S--- 100 100 054 - 0 3 Spin_Up_Time POS--- 127 127 024 - 676 (Average 425) 4 Start_Stop_Count -O--C- 099 099 000 - 4909 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 020 - 0 9 Power_On_Hours -O--C- 097 097 000 - 25379 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 4869 192 Power-Off_Retract_Count -O--CK 096 096 000 - 5530 193 Load_Cycle_Count -O--C- 096 096 000 - 5530 194 Temperature_Celsius -O---- 136 136 000 - 44 (Min/Max 3/65) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 3 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22706 - # 2 Extended offline Interrupted (host reset) 80% 11293 - # 3 Extended offline Aborted by host 90% 11280 - # 4 Extended offline Aborted by host 90% 11279 - # 5 Extended offline Interrupted (host reset) 90% 11122 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 44 Celsius Power Cycle Max Temperature: 44 Celsius Lifetime Max Temperature: 65 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (87) Index Estimated Time Temperature Celsius 88 2015-08-20 01:41 42 *********************** ... ..( 15 skipped). .. *********************** 104 2015-08-20 01:57 42 *********************** 105 2015-08-20 01:58 43 ************************ ... ..( 4 skipped). .. ************************ 110 2015-08-20 02:03 43 ************************ 111 2015-08-20 02:04 42 *********************** ... ..( 33 skipped). .. *********************** 17 2015-08-20 02:38 42 *********************** 18 2015-08-20 02:39 43 ************************ ... ..( 40 skipped). .. ************************ 59 2015-08-20 03:20 43 ************************ 60 2015-08-20 03:21 44 ************************* ... ..( 26 skipped). .. ************************* 87 2015-08-20 03:48 44 ************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdd === START OF INFORMATION SECTION === Model Family: Seagate Desktop SSHD Device Model: ST2000DX001-1CM164 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC43 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Aug 20 03:48:55 2015 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 218) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1081) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 116 096 006 - 105413954 3 Spin_Up_Time PO---- 095 094 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 893 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 128 7 Seek_Error_Rate POSR-- 078 060 030 - 76196971 9 Power_On_Hours -O--CK 093 093 000 - 6438 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 987 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 073 073 000 - 27 188 Command_Timeout -O--CK 100 099 000 - 27 27 32 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 051 045 - 37 (Min/Max 34/37) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 687 193 Load_Cycle_Count -O--CK 096 096 000 - 8650 194 Temperature_Celsius -O---K 037 049 000 - 37 (0 15 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 8216h+32m+19.142s 241 Total_LBAs_Written ------ 100 253 000 - 31618627533 242 Total_LBAs_Read ------ 100 253 000 - 57057222207 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 3900 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4580 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 27 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 27 [6] occurred at disk power-on lifetime: 2565 hours (106 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 27 7c a2 e8 00 00 Error: UNC at LBA = 0x277ca2e8 = 662479592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 27 7c a0 e8 40 00 01:10:09.382 READ FPDMA QUEUED 60 00 00 01 00 00 00 27 7c a2 e8 40 00 01:10:09.381 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 53 ce 98 40 00 01:10:09.373 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 53 cf 98 40 00 01:10:09.373 READ FPDMA QUEUED 60 00 00 01 00 00 00 07 d1 88 a0 40 00 01:10:09.251 READ FPDMA QUEUED Error 26 [5] occurred at disk power-on lifetime: 2564 hours (106 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 28 56 5f 70 00 00 Error: UNC at LBA = 0x28565f70 = 676749168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 28 56 5f 68 40 00 00:12:32.313 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 3d 51 68 40 00 00:12:29.822 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 49 e5 68 40 00 00:12:27.426 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 ed b7 70 40 00 00:12:24.965 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 ed b6 70 40 00 00:12:24.959 READ FPDMA QUEUED Error 25 [4] occurred at disk power-on lifetime: 2563 hours (106 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 27 c8 5f e8 00 00 Error: UNC at LBA = 0x27c85fe8 = 667443176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 27 c8 5f e8 40 00 03:15:34.620 READ FPDMA QUEUED 60 00 00 01 00 00 00 25 4a db a0 40 00 03:15:34.565 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 5d 5e 68 40 00 03:15:34.461 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 5d 5d 68 40 00 03:15:34.237 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 5c 2c 68 40 00 03:15:34.035 READ FPDMA QUEUED Error 24 [3] occurred at disk power-on lifetime: 2562 hours (106 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 28 4c e6 68 00 00 Error: UNC at LBA = 0x284ce668 = 676128360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 28 4c e8 68 40 00 02:17:09.480 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 4c e7 68 40 00 02:17:09.480 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 4c e6 68 40 00 02:17:09.477 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 4c e5 68 40 00 02:17:09.477 READ FPDMA QUEUED 60 00 00 01 00 00 00 28 4c e4 68 40 00 02:17:09.465 READ FPDMA QUEUED Error 23 [2] occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 ec de 70 00 00 Error: UNC at LBA = 0x26ecde70 = 653057648 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 26 ec de 70 40 00 00:33:51.299 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 91 a8 e8 40 00 00:33:51.271 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 91 a7 e8 40 00 00:33:51.213 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 91 a6 e8 40 00 00:33:51.213 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 91 a5 e8 40 00 00:33:51.144 READ FPDMA QUEUED Error 22 [1] occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 27 41 5f f8 00 00 Error: UNC at LBA = 0x27415ff8 = 658595832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 27 41 5e f8 40 00 06:51:35.245 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 f6 35 70 40 00 06:51:35.245 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 98 e1 e8 40 00 06:51:35.245 READ FPDMA QUEUED 60 00 00 01 00 00 00 03 cd a0 38 40 00 06:51:35.245 READ FPDMA QUEUED 60 00 00 01 00 00 00 27 41 5f f8 40 00 06:51:35.244 READ FPDMA QUEUED Error 21 [0] occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 f6 35 70 00 00 Error: UNC at LBA = 0x26f63570 = 653669744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 26 f6 35 70 40 00 06:51:30.451 READ FPDMA QUEUED 60 00 00 01 00 00 00 03 da e8 38 40 00 06:51:29.459 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 ac f1 e8 40 00 06:51:29.265 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 ac f2 e8 40 00 06:51:29.264 READ FPDMA QUEUED 60 00 00 01 00 00 00 26 ac f0 e8 40 00 06:51:29.248 READ FPDMA QUEUED Error 20 [19] occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 27 07 77 28 00 00 Error: UNC at LBA = 0x27077728 = 654800680 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 27 07 77 28 40 00 06:43:11.778 READ FPDMA QUEUED 60 00 00 01 00 00 00 27 05 37 28 40 00 06:43:11.495 READ FPDMA QUEUED 60 00 00 01 00 00 00 27 05 36 28 40 00 06:43:11.248 READ FPDMA QUEUED 60 00 00 01 00 00 00 27 05 35 28 40 00 06:43:11.086 READ FPDMA QUEUED 60 00 00 01 00 00 00 05 34 0b 58 40 00 06:43:10.907 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3760 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 25/35 Celsius Lifetime Min/Max Temperature: 16/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS