/dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD5000LPVX-22V0TT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Oct 20 09:02:16 2019 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8820) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 102) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 106 3 Spin_Up_Time POS--K 156 143 021 - 1191 4 Start_Stop_Count -O--CK 079 079 000 - 21506 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 093 093 000 - 5342 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1806 191 G-Sense_Error_Rate -O--CK 036 036 000 - 64 192 Power-Off_Retract_Count -O--CK 200 200 000 - 101 193 Load_Cycle_Count -O--CK 187 187 000 - 41116 194 Temperature_Celsius -O---K 111 067 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 9 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 [8] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 d5 4d 50 40 00 Error: UNC at LBA = 0x39d54d50 = 970280272 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 48 00 00 39 d5 4d 50 40 08 00:15:35.678 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:15:35.678 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:15:35.677 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:15:35.677 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:15:35.677 SET FEATURES [Set transfer mode] Error 8 [7] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 d5 4d 50 40 00 Error: UNC at LBA = 0x39d54d50 = 970280272 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 40 00 00 39 d5 4d 50 40 08 00:15:31.863 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:15:31.862 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:15:31.862 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:15:31.862 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:15:31.862 SET FEATURES [Set transfer mode] Error 7 [6] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 d5 4d 48 40 00 Error: UNC at LBA = 0x39d54d48 = 970280264 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 38 00 00 39 d5 4d 48 40 08 00:15:28.103 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:15:28.102 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:15:28.102 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:15:28.102 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:15:28.101 SET FEATURES [Set transfer mode] Error 6 [5] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 d5 4d 48 40 00 Error: UNC at LBA = 0x39d54d48 = 970280264 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 30 00 00 39 d5 4d 48 40 08 00:15:24.342 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:15:24.342 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:15:24.342 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:15:24.341 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:15:24.341 SET FEATURES [Set transfer mode] Error 5 [4] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 d5 4d 48 40 00 Error: UNC at LBA = 0x39d54d48 = 970280264 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 28 00 00 39 d5 4d 48 40 08 00:15:20.600 READ FPDMA QUEUED 60 00 08 00 20 00 00 39 d5 4d 40 40 08 00:15:19.085 READ FPDMA QUEUED 60 00 08 00 18 00 00 39 d5 4d 38 40 08 00:15:17.580 READ FPDMA QUEUED 60 00 08 00 10 00 00 39 d5 4d 30 40 08 00:15:17.580 READ FPDMA QUEUED 60 00 08 00 08 00 00 39 d5 4d 28 40 08 00:15:17.580 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 c5 66 30 40 00 Error: UNC at LBA = 0x39c56630 = 969238064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c0 00 00 39 c5 66 30 40 08 00:15:03.437 READ FPDMA QUEUED 60 00 08 00 b8 00 00 39 c5 66 28 40 08 00:15:02.722 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:15:02.722 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:15:02.722 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:15:02.721 IDENTIFY DEVICE Error 3 [2] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 c5 66 28 40 00 Error: UNC at LBA = 0x39c56628 = 969238056 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b0 00 00 39 c5 66 28 40 08 00:14:58.940 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:14:58.940 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:14:58.939 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:14:58.939 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:14:58.939 SET FEATURES [Set transfer mode] Error 2 [1] occurred at disk power-on lifetime: 2075 hours (86 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 39 c5 66 28 40 00 Error: UNC at LBA = 0x39c56628 = 969238056 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a8 00 00 39 c5 66 28 40 08 00:14:55.175 READ FPDMA QUEUED 60 00 08 00 a0 00 00 39 c5 66 20 40 08 00:14:54.081 READ FPDMA QUEUED 60 00 08 00 98 00 00 39 c5 66 18 40 08 00:14:54.081 READ FPDMA QUEUED 60 00 08 00 90 00 00 39 c5 66 10 40 08 00:14:54.081 READ FPDMA QUEUED 60 00 08 00 88 00 00 39 c5 66 08 40 08 00:14:53.908 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5286 - # 2 Short offline Completed without error 00% 3457 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 27/31 Celsius Lifetime Min/Max Temperature: 14/76 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (22) Index Estimated Time Temperature Celsius 23 2019-10-20 06:55 48 ***************************** 24 2019-10-20 06:56 49 ****************************** 25 2019-10-20 06:57 49 ****************************** 26 2019-10-20 06:58 50 ******************************* 27 2019-10-20 06:59 ? - 28 2019-10-20 07:00 51 ******************************** 29 2019-10-20 07:01 51 ******************************** 30 2019-10-20 07:02 ? - 31 2019-10-20 07:03 29 ********** 32 2019-10-20 07:04 ? - 33 2019-10-20 07:05 30 *********** 34 2019-10-20 07:06 30 *********** 35 2019-10-20 07:07 31 ************ 36 2019-10-20 07:08 32 ************* 37 2019-10-20 07:09 34 *************** 38 2019-10-20 07:10 35 **************** 39 2019-10-20 07:11 36 ***************** 40 2019-10-20 07:12 37 ****************** 41 2019-10-20 07:13 38 ******************* 42 2019-10-20 07:14 39 ******************** 43 2019-10-20 07:15 40 ********************* 44 2019-10-20 07:16 40 ********************* 45 2019-10-20 07:17 40 ********************* 46 2019-10-20 07:18 41 ********************** 47 2019-10-20 07:19 42 *********************** 48 2019-10-20 07:20 42 *********************** 49 2019-10-20 07:21 43 ************************ 50 2019-10-20 07:22 43 ************************ 51 2019-10-20 07:23 44 ************************* 52 2019-10-20 07:24 44 ************************* 53 2019-10-20 07:25 45 ************************** 54 2019-10-20 07:26 45 ************************** 55 2019-10-20 07:27 46 *************************** 56 2019-10-20 07:28 46 *************************** 57 2019-10-20 07:29 47 **************************** 58 2019-10-20 07:30 47 **************************** 59 2019-10-20 07:31 47 **************************** 60 2019-10-20 07:32 48 ***************************** 61 2019-10-20 07:33 48 ***************************** 62 2019-10-20 07:34 48 ***************************** 63 2019-10-20 07:35 49 ****************************** 64 2019-10-20 07:36 49 ****************************** 65 2019-10-20 07:37 49 ****************************** 66 2019-10-20 07:38 50 ******************************* 67 2019-10-20 07:39 51 ******************************** ... ..( 2 skipped). .. ******************************** 70 2019-10-20 07:42 51 ******************************** 71 2019-10-20 07:43 52 ********************************* 72 2019-10-20 07:44 52 ********************************* 73 2019-10-20 07:45 52 ********************************* 74 2019-10-20 07:46 53 ********************************** ... ..( 3 skipped). .. ********************************** 78 2019-10-20 07:50 53 ********************************** 79 2019-10-20 07:51 54 *********************************** ... ..( 4 skipped). .. *********************************** 84 2019-10-20 07:56 54 *********************************** 85 2019-10-20 07:57 55 ************************************ ... ..( 7 skipped). .. ************************************ 93 2019-10-20 08:05 55 ************************************ 94 2019-10-20 08:06 56 ************************************* ... ..( 7 skipped). .. ************************************* 102 2019-10-20 08:14 56 ************************************* 103 2019-10-20 08:15 57 ************************************** ... ..( 8 skipped). .. ************************************** 112 2019-10-20 08:24 57 ************************************** 113 2019-10-20 08:25 58 *************************************** ... ..( 3 skipped). .. *************************************** 117 2019-10-20 08:29 58 *************************************** 118 2019-10-20 08:30 ? - 119 2019-10-20 08:31 28 ********* 120 2019-10-20 08:32 28 ********* 121 2019-10-20 08:33 30 *********** 122 2019-10-20 08:34 30 *********** 123 2019-10-20 08:35 32 ************* 124 2019-10-20 08:36 33 ************** 125 2019-10-20 08:37 35 **************** 126 2019-10-20 08:38 35 **************** 127 2019-10-20 08:39 36 ***************** 0 2019-10-20 08:40 38 ******************* 1 2019-10-20 08:41 39 ******************** 2 2019-10-20 08:42 40 ********************* 3 2019-10-20 08:43 40 ********************* 4 2019-10-20 08:44 41 ********************** 5 2019-10-20 08:45 42 *********************** 6 2019-10-20 08:46 43 ************************ 7 2019-10-20 08:47 44 ************************* 8 2019-10-20 08:48 44 ************************* 9 2019-10-20 08:49 45 ************************** 10 2019-10-20 08:50 46 *************************** 11 2019-10-20 08:51 46 *************************** 12 2019-10-20 08:52 47 **************************** 13 2019-10-20 08:53 47 **************************** 14 2019-10-20 08:54 48 ***************************** 15 2019-10-20 08:55 ? - 16 2019-10-20 08:56 27 ******** 17 2019-10-20 08:57 ? - 18 2019-10-20 08:58 27 ******** 19 2019-10-20 08:59 27 ******** 20 2019-10-20 09:00 28 ********* 21 2019-10-20 09:01 30 *********** 22 2019-10-20 09:02 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 63 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 326 Vendor specific