/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.10-200.fc39.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SAMSUNG MZVLW256HEHP-000L7 Serial Number: -- Firmware Version: 5L7QCXB7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 2 NVMe Version: 1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Utilization: 146,227,736,576 [146 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Fri Jun 28 23:50:22 2024 EDT Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Warning Comp. Temp. Threshold: 69 Celsius Critical Comp. Temp. Threshold: 72 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.60W - - 0 0 0 0 0 0 1 + 6.00W - - 1 1 1 1 0 0 2 + 5.10W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1500 4 - 0.0050W - - 4 4 4 4 2200 6000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 33 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 6% Data Units Read: 45,080,281 [23.0 TB] Data Units Written: 54,022,617 [27.6 TB] Host Read Commands: 893,370,713 Host Write Commands: 2,105,858,731 Controller Busy Time: 5,562 Power Cycles: 127 Power On Hours: 15,821 Unsafe Shutdowns: 47 Media and Data Integrity Errors: 0 Error Information Log Entries: 4,458 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 33 Celsius Temperature Sensor 2: 33 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 4458 0 0x001d 0x4004 - 0 1 - Invalid Field in Command 1 4457 0 0xe01d 0x4004 - 0 1 - Invalid Field in Command 2 4456 0 0xd01c 0x4004 - 0 1 - Invalid Field in Command 3 4455 0 0xc01c 0x4004 - 0 1 - Invalid Field in Command 4 4454 0 0xb01c 0x4004 - 0 1 - Invalid Field in Command 5 4453 0 0xa01c 0x4004 - 0 1 - Invalid Field in Command 6 4452 0 0x701d 0x4004 - 0 1 - Invalid Field in Command 7 4451 0 0x601d 0x4004 - 0 1 - Invalid Field in Command 8 4450 0 0x501d 0x4004 - 0 1 - Invalid Field in Command 9 4449 0 0x401d 0x4004 - 0 1 - Invalid Field in Command 10 4448 0 0x301d 0x4004 - 0 1 - Invalid Field in Command 11 4447 0 0x201d 0x4004 - 0 1 - Invalid Field in Command 12 4446 0 0x101d 0x4004 - 0 1 - Invalid Field in Command 13 4445 0 0x2019 0x4004 - 0 0 - Invalid Field in Command 14 4444 0 0x8006 0x4004 - 0 1 - Invalid Field in Command 15 4443 0 0x7007 0x4004 - 0 1 - Invalid Field in Command ... (48 entries not read) Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress No Self-tests Logged