/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.2 Device Model: ST980813AS Serial Number: -- Firmware Version: 3.ADC User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sat May 6 12:21:28 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0xffff (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0 3 Spin_Up_Time PO---- 099 099 085 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2297 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 060 059 030 - 270642575035 9 Power_On_Hours -O--CK 098 098 000 - 2570 10 Spin_Retry_Count PO--C- 100 100 034 - 0 12 Power_Cycle_Count -O--CK 098 098 020 - 2294 187 Reported_Uncorrect -O--CK 046 046 000 - 54 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 039 045 Past 40 (Min/Max 40/42 #2) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1277 193 Load_Cycle_Count -O---K 055 055 000 - 91159 194 Temperature_Celsius -O-RC- 040 061 000 - 40 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O--C- 070 060 000 - 15063610 197 Current_Pending_Sector ----C- 100 100 000 - 0 198 Offline_Uncorrectable -OSRCK 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 200 200 000 - 0 200 Multi_Zone_Error_Rate -O--CK 100 253 000 - 0 202 Data_Address_Mark_Errs ------ 100 253 000 - 0 254 Free_Fall_Sensor ------ 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 SL R/O 1 NCQ Command Error log 0x11 SL R/O 1 SATA Phy Event Counters log 0x20 SL R/O 1 Streaming performance log [OBS-8] 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 54 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 54 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 59 f8 18 e0 Error: UNC at LBA = 0x0018f859 = 1636441 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 f3 f7 18 e0 00 01:47:37.701 READ DMA c8 00 00 f3 f6 18 e0 00 01:47:37.698 READ DMA c8 00 00 f3 f5 18 e0 00 01:47:37.696 READ DMA c8 00 00 f3 f4 18 e0 00 01:47:37.695 READ DMA c8 00 00 f3 f3 18 e0 00 01:47:37.693 READ DMA Error 53 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 59 f8 18 e0 Error: UNC at LBA = 0x0018f859 = 1636441 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 f3 f7 18 e0 00 01:47:34.786 READ DMA c8 00 48 03 86 50 e6 00 01:47:34.786 READ DMA ca 00 08 bb ff 48 e6 00 01:47:31.440 WRITE DMA ca 00 03 1b b4 6d e5 00 01:47:31.439 WRITE DMA c8 00 08 cb d6 81 e0 00 01:47:31.438 READ DMA Error 52 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 59 f8 18 e0 Error: UNC at LBA = 0x0018f859 = 1636441 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 f3 f7 18 e0 00 01:47:31.426 READ DMA c8 00 80 73 f7 18 e0 00 01:47:31.425 READ DMA c8 00 80 f3 f6 18 e0 00 01:47:31.440 READ DMA c8 00 80 73 f6 18 e0 00 01:47:31.439 READ DMA c8 00 80 f3 f5 18 e0 00 01:47:31.438 READ DMA Error 51 occurred at disk power-on lifetime: 1366 hours (56 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 59 f8 18 e0 Error: UNC at LBA = 0x0018f859 = 1636441 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 53 f8 18 e0 00 00:35:50.587 READ DMA c8 00 40 53 09 fe e4 00 00:35:50.587 READ DMA ca 00 08 cb be 49 e4 00 00:35:50.586 WRITE DMA c8 00 40 d3 04 57 e0 00 00:35:50.586 READ DMA ca 00 18 f3 0e a7 e4 00 00:35:50.586 WRITE DMA Error 50 occurred at disk power-on lifetime: 1366 hours (56 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 59 f8 18 e0 Error: UNC at LBA = 0x0018f859 = 1636441 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 f3 f7 18 e0 00 00:35:47.076 READ DMA c8 00 00 f3 f6 18 e0 00 00:35:47.074 READ DMA c8 00 00 f3 f5 18 e0 00 00:35:47.071 READ DMA c8 00 00 f3 f4 18 e0 00 00:35:47.069 READ DMA c8 00 00 f3 f3 18 e0 00 00:35:47.067 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1 - # 2 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 521 (0x0209) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 29/42 Celsius Lifetime Min/Max Temperature: 17/61 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 Another SCT command is executing, abort Read Data Table (SCT ext_status_code 0xffff, action_code=4, function_code=2) Read SCT Temperature History failed SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 12 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 120 Transition from drive PhyRdy to drive PhyNRdy 0x8002 2 1 Vendor specific 0x8003 2 102 Vendor specific 0x8004 2 0 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..75GSX Device Model: TOSHIBA MK5075GSX Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: GT001M User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat May 6 12:21:28 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 156) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 468 4 Start_Stop_Count -O--CK 100 100 000 - 12305 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 24 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 038 038 000 - 24862 10 Spin_Retry_Count PO--CK 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 6190 191 G-Sense_Error_Rate -O--CK 100 100 000 - 43441 192 Power-Off_Retract_Count -O--CK 100 100 000 - 200 193 Load_Cycle_Count -O--CK 054 054 000 - 469022 194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 6/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 3 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 220 Disk_Shift -O---- 100 100 000 - 76 222 Loaded_Hours -O--CK 076 076 000 - 9863 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 291 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 ff fe 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f6 03 03 ff ff 00 00 00 00 00 00 a0 00 00:02:16.889 SECURITY DISABLE PASSWORD f6 03 03 00 00 00 00 00 00 00 00 a0 00 00:02:16.297 SECURITY DISABLE PASSWORD 25 03 03 00 01 00 00 00 00 00 00 e0 00 00:02:09.991 READ DMA EXT 24 00 03 00 01 00 00 3a 38 4c 40 e0 00 00:00:31.185 READ SECTOR(S) EXT 37 00 00 00 00 00 00 3a 38 60 2f e0 00 00:00:31.185 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 4 [3] occurred at disk power-on lifetime: 10696 hours (445 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 ff 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f6 03 03 00 00 00 00 00 00 00 00 a0 00 00:02:16.297 SECURITY DISABLE PASSWORD 25 03 03 00 01 00 00 00 00 00 00 e0 00 00:02:09.991 READ DMA EXT 24 00 03 00 01 00 00 3a 38 4c 40 e0 00 00:00:31.185 READ SECTOR(S) EXT 37 00 00 00 00 00 00 3a 38 60 2f e0 00 00:00:31.185 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 00 38 60 2f 00 00 00 e0 00 00:00:31.185 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 3 [2] occurred at disk power-on lifetime: 2227 hours (92 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 68 00 00 01 1a 8c 18 e1 00 Error: UNC 104 sectors at LBA = 0x011a8c18 = 18517016 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 01 1a 8c 08 e0 00 00:00:31.053 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8c 08 e0 00 00:00:27.098 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8c 08 e0 00 00:00:23.102 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8b 90 e0 00 00:00:23.101 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8b 18 e0 00 00:00:23.100 READ DMA EXT Error 2 [1] occurred at disk power-on lifetime: 2227 hours (92 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 68 00 00 01 1a 8c 18 e1 00 Error: UNC 104 sectors at LBA = 0x011a8c18 = 18517016 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 01 1a 8c 08 e0 00 00:00:27.098 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8c 08 e0 00 00:00:23.102 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8b 90 e0 00 00:00:23.101 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8b 18 e0 00 00:00:23.100 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8a a0 e0 00 00:00:23.099 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 2227 hours (92 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 68 00 00 01 1a 8c 18 e1 00 Error: UNC 104 sectors at LBA = 0x011a8c18 = 18517016 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 01 1a 8c 08 e0 00 00:00:23.102 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8b 90 e0 00 00:00:23.101 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8b 18 e0 00 00:00:23.100 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8a a0 e0 00 00:00:23.099 READ DMA EXT 25 00 00 00 78 00 00 01 1a 8a 28 e0 00 00:00:23.098 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 34/34 Celsius Lifetime Min/Max Temperature: 6/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (95) Index Estimated Time Temperature Celsius 96 2023-05-06 04:24 32 ************* ... ..( 32 skipped). .. ************* 129 2023-05-06 04:57 32 ************* 130 2023-05-06 04:58 31 ************ 131 2023-05-06 04:59 32 ************* ... ..( 58 skipped). .. ************* 190 2023-05-06 05:58 32 ************* 191 2023-05-06 05:59 31 ************ ... ..( 3 skipped). .. ************ 195 2023-05-06 06:03 31 ************ 196 2023-05-06 06:04 32 ************* ... ..( 3 skipped). .. ************* 200 2023-05-06 06:08 32 ************* 201 2023-05-06 06:09 31 ************ ... ..( 19 skipped). .. ************ 221 2023-05-06 06:29 31 ************ 222 2023-05-06 06:30 ? - 223 2023-05-06 06:31 31 ************ ... ..( 54 skipped). .. ************ 278 2023-05-06 07:26 31 ************ 279 2023-05-06 07:27 ? - 280 2023-05-06 07:28 30 *********** 281 2023-05-06 07:29 31 ************ ... ..(118 skipped). .. ************ 400 2023-05-06 09:28 31 ************ 401 2023-05-06 09:29 ? - 402 2023-05-06 09:30 ? - 403 2023-05-06 09:31 ? - 404 2023-05-06 09:32 32 ************* ... ..( 20 skipped). .. ************* 425 2023-05-06 09:53 32 ************* 426 2023-05-06 09:54 31 ************ ... ..( 30 skipped). .. ************ 457 2023-05-06 10:25 31 ************ 458 2023-05-06 10:26 ? - 459 2023-05-06 10:27 31 ************ ... ..( 15 skipped). .. ************ 475 2023-05-06 10:43 31 ************ 476 2023-05-06 10:44 ? - 477 2023-05-06 10:45 ? - 0 2023-05-06 10:46 32 ************* ... ..( 43 skipped). .. ************* 44 2023-05-06 11:30 32 ************* 45 2023-05-06 11:31 ? - 46 2023-05-06 11:32 ? - 47 2023-05-06 11:33 31 ************ ... ..( 4 skipped). .. ************ 52 2023-05-06 11:38 31 ************ 53 2023-05-06 11:39 32 ************* ... ..( 10 skipped). .. ************* 64 2023-05-06 11:50 32 ************* 65 2023-05-06 11:51 33 ************** ... ..( 13 skipped). .. ************** 79 2023-05-06 12:05 33 ************** 80 2023-05-06 12:06 34 *************** ... ..( 6 skipped). .. *************** 87 2023-05-06 12:13 34 *************** 88 2023-05-06 12:14 ? - 89 2023-05-06 12:15 34 *************** ... ..( 5 skipped). .. *************** 95 2023-05-06 12:21 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC